Life Mage is also invincible

Finally proceeded to the next operation.

It took 11 days to complete the line of "installing fluorescent lights and connecting wires from the ticket gate room to the intersection room".Thanks to you, the road to the crossroads room was a little brighter, but the dungeon was still dark after leaving the fluorescent lights a little.

So today is the rest day, after taking care of my father, I brought Gaul to the dungeon at 20:[-] in the evening.

The required items and tools have been moved to the intersection room and are ready.From here is new work.

First of all, you must clean the hive on the left hand side of the intersection room that has been sealed for 11 days.

According to Keita's prediction, there should be hundreds of needles inside.

Confirmed, annihilated.Everything is ready.

Pull out the stake of the seal, and pull out the Compaq cover stuck in the passage.Then use the handheld light to illuminate the passageway forward.

A surprising number of feather calls were heard.Not dozens of them, the sound is very loud.

As we traveled to the point where the light was able to reach the depths, we saw a large number of needles flying.That is not the number that can be knocked down with a wooden knife, there must be hundreds of them.

Jing Tai hurriedly turned to the right and walked back through the aisle.

The needle ratio has increased as expected by Keita, so I can only fight with example tires.

Since the tires etc. are fully prepared, there is no problem.This is to be expected.

After returning to the crossroads room, put the company's cover back in the aisle first, don't let the pinbi get away, and start preparing.

Set up a wood fire for a wood stove out of the way, light the fire starter and add it to the fire.

The fire of the igniting agent burns to the firewood in an instant, and the put together firewood is surrounded by the fire.

Take a lesson from your last failure and think a little bit about where you put your tires and where you place your campfire to make the tires easier to toss.

The number of copies will not decrease, and I plan to challenge again with 4 copies.Don't fail this time.

Feeling good after the firewood caught fire, the peacock cap was removed from the aisle and ready to throw the tire in.

Use the litter removal tongs to place the ignited firewood inside the tire.

From here it's a race of speed.

Keep an eye on the burning of the tires while putting firewood on.If you don't stuff well-burned firewood into the inside of the tire, the tire may stay burning, so stuff it well cute, but if you stuff it too tightly, it will burn the tire this time on this occasion , can't throw it down.

This was exactly the case with the last failure, and we must see clearly this time.

It's all right. Are you leaving yet?
Didn't manage to get all the blazing firewood into the tires, but the tires were ablaze, so I decided to throw the firewood into the aisle one by one.

The smell of burnt rubber bands came to my nostrils. Although I frowned, I kept throwing them in.Second branch, third branch.

Judging by the fire coming from the tires, it was chugging and rolling down the depths of the tunnel.

I was in the room at the crossroads but heard the sound of wings.It looks like the needle ratio is overflowing from the aisle.

But don't rush here.4th input.

Dozens of needles overflowed the room at the intersection with a humming feather sound, charging towards Keita.

While being collected by the needle, he hastily pushed his partner's lid into the channel.In order to escape from the smoky hive, the ball of needles touched the cover of the mate, and in the fierce resistance, finally pushed the cover to the predetermined position, so the stake was also set.One bottle, two bottles.

Then the needles buzzing around Keita were more than depressing, so he pulled out a wooden knife from his back and knocked them off one by one.

Phew, it looks like it worked.Knock out all the needles spilling out of the room at the crossroads and catch your breath.

With the tires all in this time, the room at the crossroads was a bit smoky, totally tolerable.

It can be said that it was a great success because all the needle ratios who wanted to escape were defeated.

Pack up the surrounding things, put the square wood and side dishes in the place where you can work.

I want to remake the company's cover from now on.The lid I'm using now hurts because I let it come out and go in several times, and most importantly it's a hassle because of the force dragging it to the ground to make it move.It turns out that the door will have to be opened and closed several times in the future, and I want to build it smarter.

Thinking of improving functionality with casters attached to the bottom like a bogie.If so, moving is easy, and most importantly, if you put tire chocks under the casters, you won't be able to move because the cap won't come off every time you pile.

The first is to cut the company into the shape of the channel.Trace the shape with the pencil as accurately as possible.

Once done, it's the turn of the electric circular saw.No matter how the electricity is connected here, there is no way to use it.

Plug the flexible wire on the chainsaw into the power supply, and walk towards Master Kong who is lying on the square wood.Then there was a good hissing sound, and the cut was over in a blink of an eye.The weapons of civilization are terrifying.

Then cut a few more pieces of plywood to size and ended up with sawdust all over the floor.

Put the cut clip on the channel, confirm the size, it seems to be ok.

Next comes assembly.This time it was made into a box shape.It's like attaching an aisle-sized clip to a boxy box.

Use square wood as a skeleton to make a box with increased strength.Because casters are installed underneath, that part, the box smaller than the aisle, was also taken into account.

Here comes the electric driver.It flashed at the hand, and in a blink of an eye, the screw was driven into the door.It is indispensable for DIY.

It didn't take long to produce a square box with casters.It's something that moves without so much force.

A splint cut into the shape of the channel is affixed there, at the same height.

The big work is over, and it has come to an end. When I check the watch on the mobile phone, it is already 0:40 in the morning.

Oops, I remembered that I didn't buy a box lunch.

After that, I didn't clean it up, so I rushed back to the ticket gate room after making a mess on the floor.

Open the door, grab the nearby recliner tablet and open the takeaway.Because there was not much time to hesitate, I clicked on the ramen set that came to mind at first, including ramen, dumplings, and mini fried rice.

"Please show the card."

"Crack" click!
The white box on the table began to open, and the side part slowly fell down, and the ramen set on the tray was pushed out from inside.

The steaming ramen set is served with a small dish of pickled vegetables.what happened?Mystery box.

When I hurriedly removed the equipment because the noodles would become longer, the power of the ATM machine and the ticket gate was cut off.Fortunately, we caught up.

On the way to eat ramen, "Meow Meow" Geer also called "Meow Meow", boiled milk while eating, and then had a meal with Geer.

So, what about the utensils for ramen?Unexpectedly, when I was cooking fried rice, I saw the words "Please put the container back in the box" on the bottom of the plate, so I put it back in the mysterious white box on the table.

Is this box too mysterious?
I wanted to play with Gaul, but Gaul seemed to be asleep, so he spent a leisurely meal holiday while enjoying the soft brown and black striped hair.

Since you are well rested, go back to work.

Gently put Goer, who was completely asleep, into the hard-shell bag, and took it away quietly.

The room at the crossroads is the continuation just now.Having said that, the lid of the new Compaq is almost complete.After that is to install a handle that can be pushed and pulled.

Speaking of which, before the meal, you have to go through the gap of the lid stuffed into the aisle
Black smoke leaked out, and now I can see nothing.I think the tires have burned out?

More than 3 hours after ignition, it may have reached the time of burning out.

That way, I'd care about the inside, so I decided to take a peek.

Remove the pile and drag out the mate cover.The inward-facing company is gurgling smoke.

If the companion catches fire suddenly, it’s not easy to deal with, just drag it to a place where there is nothing, as if it’s okay if it’s on fire.

Ask again about the situation in the aisle.

Although there is still a little smoke, it is not so thick that it cannot be pushed forward.Since there is no fire inside, let's extinguish the fire for now.

Walk in the aisle with a light in hand.

Because it used to be black everywhere, I didn't feel any change.

Approaching the hive room, but did not hear the sound of Jibi's wings.Instead, a gust of hot air greeted me.

Lighted up the whole room, but couldn't find a pin that stayed that long.It appears that the annihilation was successful.

All right, all right, smiling and walking back to the aisle, back to the room at the crossroads.

It doesn't end there.It's not an exaggeration to say that it starts here.

Why did it take 11 days to get here?
Yes, electric fences for bears that are starting to be installed now.A first-class product with an asking price of 600 yuan.The hive is covered with wires, causing it to be electrocuted the moment the needle pops out.

If it can go smoothly, Wuwu's current state is incomparable.

It is not difficult to install.Simply erect a pole in the ground and connect it to the electric shock device through wires.The wires are 9000 meters long, so they must be densely packed without touching each other.

Immediately prepare to move the necessary cargo.Let's put aside the minutiae, and the priority of setting traps is the highest.

Start by stabbing the struts into the ground and ceiling.While thinking about where to go through the wires, it is full of zigzags.

It is hoped that the entrance and exit of the room are exactly like mesh.Using the hallway ceiling and walls should do the trick.

About 15m x 15m, the wires fill a room the size of a convenience store.Turning around in a single stroke.

It took a lot of time to set up the first paragraph at the beginning, and you only need to follow the first paragraph later.

While taking a break on the way, use the 2nd, 3rd and electric wires to make a fence.

At the end of the third paragraph, I couldn't help but glance towards the ceiling.I always feel that there is a purple fog... because I am inexplicably concerned about it, so I keep looking at it, and the fog is getting thicker and thicker.

I didn't have a good feeling about this, and while working, I jumped over the pulling wires and headed down the aisle back to the intersection.Leave the wooden knife there.

Pick up the wooden knife "Akakashi Kojiro" and enter the passage again.

Back to the hive where the wires were pulled, dozens of needles were found flying around.Sure enough, that fog was the precursor of Li Pope.

Jump over the wires and enter the room, wielding the wooden knife in your hand.We are creating a trap, now only a hindrance.

In less than 10 minutes I knocked out all the pin ratios without breaking the fence.

So I suddenly became curious and took out my mobile phone to confirm the time. It turned out to be 4:14 in the morning.

So that's it, is it 4:[-] in the morning for Lipop?Are the business hours the same as those of the box office ATMs?It probably has something to do with it, but I don't know much more, so I keep it in a corner of my mind.

He wanted to cheer up and leaned the wooden knife against the wall to continue working, but Gore on his back yelled "fan".All this happened in the process of eliminating the needle ratio now.You did something bad.

He picked up the wooden knife on the wall again, returned from the aisle, and returned to the ticket gate room to make milk for Goer.

After that, I silently worked on the shelf in the hive room, but this day cannot end, and the completed work is left for later.

3:58 am the next day.

I finally finished setting up the bear electric fence just now, connected the bear electric shock device to the wires, and turned on the power.The power is of course pulled from the ticket gate and doesn't start until 4am.So this time I'm here to see if it works.

It's exactly 4 o'clock in the morning when I look at my phone.I looked at the electric shock device used by the bear, and the power light was glowing, indicating that it was working.

If it's true, measure the voltage on the wire with a tester or something at this point to confirm, if it's here, you can investigate if you don't.

Babababa!

Suddenly there was a flying sound of something bouncing away.

When I saw it, many needles fell to the ground as soon as they jumped, and they turned over and smoked.It seems that the installation went well.

Babababa!

After that, I also watched an incredible scene for a while, maybe Lipp stopped today, and the needle ratio never appeared again.