Internet celebrities forcibly exchanged tickets, and my identity as a boss was exposed!

Chu Chen didn't know that because of Zhou Chuanren's explanation, his status in the eyes of those high-level officials had been raised.

You must know that having a technology that others do not have in a certain field is to be superior to others, and you will be beaten if you fall behind. This sentence is practical no matter what field you are in.

As long as it is stronger than other countries in a certain field, it is a point of propaganda and a means that can be used for diplomacy.

The restoration of cultural relics is even more important. Which country can't have a few damaged national treasures? As long as there are damaged national treasures, there will be a request to Hua Guo one day.

Wouldn't the friendly diplomatic relationship begin by then?
At this time, Chu Chen was concentrating on filling the vacancy on the Fabergé egg.

The middle part has been filled, and the gaps on the sides are left to be filled.

Filling the edge of this gap is the most difficult.

Because the gap at the edge is shallower, if there are too many powder patterns, it will be uneven, and if there are too few patterns, the filling effect will not be achieved.

Even Chu Chen had to be careful.

Chu Chen didn't use the mini spoon any more, he just changed to a brush, brushed on the edge, and stacked it over and over again.

After brushing one part, change the position and paint slowly.

The netizens in the live broadcast room were amused.

"To be honest, this operation is a bit like pasting a wall, but the tools used are different."

"One thing to say, it was really like mud at the beginning, and then when Master Chu Chen took out a small spoon tool, it was a bit like playing house, and now changing the brush is a bit like painting a wall, hahaha. "

"The two big brothers upstairs described it well, and the imagery is too strong."

"No, you have to hold back and don't laugh. This is a serious cultural relic restoration program. I really can't help the "poof". I'm sorry to laugh first."

"The ones above don't understand. I'm a professor at Gu'an University, teaching archaeology. Don't look at the casual movements of Master Chu Chen. These are all exquisite, such techniques, proportions, and Filling in the gaps requires a lot of comparison and a lot of instrument testing to be accurate."

"If we usually do these things, we need to use some instruments to detect the appropriate ratio."

"Master Chu Chen is the only one in the world who does not need to use instruments, but only uses ancient methods to adjust the ratio of materials, and can still achieve a level that can be called a machine."

"You dolls don't understand, and the old man doesn't blame you, but my old man still wants to let you know that behind this seemingly random movement, Master Chu Chen has practiced countless times before he can achieve it with just a glance. Such precise materials."

"My old man wants you to know his hardships, and I don't want you to ridicule him as a top master in the cultural relics world."

After the professor finished speaking, the live broadcast room was silent for about 30 seconds, and no one spoke.

They didn't know that this seemingly simple movement turned out to be impossible for other people to do.

It turned out that this inadvertent action made other top figures at home and abroad have to go through the testing of instruments before they dared to start mixing materials.

Thinking that although I didn't stop teasing just now, I was indeed laughing in my heart.

I really thought it was very simple, because no matter which one of these movements looked extremely simple, there was no challenge at all.

It turns out they were all wrong.

Those netizens who just finished teasing were ashamed and picked up the keyboards in their hands to apologize.

"Sorry, I shouldn't have ridiculed Master Chu Chen like a wall."

| "I'm sorry, I shouldn't either."

"sorry."

"The following are all words of apology."

He didn't know what happened in the live broadcast room when he got out of the car, even if he knew, he didn't care.

Because it is really easy for him to prepare these materials, and because he has the system cheats, he no longer needs the step of instrument detection.

It is also a credit for him to be able to deploy the material system at a glance.

At this point, he is painting the last part of the edge, and will soon be filled and painted, and it is time to move on to the next step.

The next step is to dry the filled material. Considering that the integrity cannot be damaged, Chu Chen brought a baking lamp.

Wrap the other parts with materials to prevent other parts from being burned by high temperature, leaving only the gaps to bake under the lamp.

This time is about ten minutes.

Because there is a layer of glue on the gap before bonding, the glue Chu Chen uses is still the glue produced by the system.

The glue produced by the system has a higher degree of solidity and better viscosity and is not easy to fall off.

But because the glue can't be baked for too long, Chu Chen took advantage of this baking opportunity to put all the materials produced by the system into the system space while collecting the materials.

Only some ordinary materials are left, and these should be kept secret, so don't expose them, it will be bad if they are discovered by then.

Last night, these were almost baked regardless of the gap, Chu Chen directly turned off the baking light, and then carefully took off the wrapped layer of material.

Chu Chen also pinched whether the baking from Chengdu was hard enough, and after feeling out that it was hard enough, Chu Chen started the next step.

After the gap is filled, firstly use wood sandpaper to smooth it, and fill some gaps that are not enough with putty.

After following the previous step, dry it again, but this time without a baking lamp, this time directly dry it with a hair dryer.

Baking too many times can easily cause cracking.

After the putty on it dried, Chu Chen smoothed it with fine water sandpaper.

If it is a material prepared by others, it may be prone to discoloration.

But what Chu Chen used was a certain transparent material produced by the system, which was not easy to change color, and the feel and appearance were no different from the original utensils.

Chu Chen couldn't help sighing that the system's products were really extraordinary.

Chu Chen repeated drying and polishing several times until the gap was smoothed.

Then came the critical step, that is toning, and glazing the repaired places, which is not easy.

First of all, the enamel must be prepared. Generally, nitro lacquer and three times ethyl acetate are mixed thoroughly. If the glaze of the original object is blue or yellowish, it is necessary to add some acrylic paint and mix thoroughly in a small glass.

The color must be accurate, and the glazing action must be clean.Generally, use a refined brush that does not shed hair to cut off the tip of the brush and lick it into a flat edge.The brush strokes should be even and even, with one stroke in place and as little heavy strokes as possible.

Glazing needs to be repeated according to the thickness of the original glaze until it is the same as the original.

The first thing Chu Chen started was toning, and this toning also had to adjust the base color and complexion.

The base color is the color applied on the bottom layer, and the surface color is used to make up for the color difference of the base color, so as to achieve the same color as the original product.