Great Power Heavy Industry: Rise

Chapter 148 Feng Shui takes turns

2 month 18 day.

On the Fuxi optical brain at the experimental base of the Academy of Science and Technology, Zhong Cheng ran a controllable nuclear fusion test for the first time.

The super-tokamak device in the Taixu experimental system completed a test process within 5 minutes, perfectly reproducing the latest test results of plasma operation at 1.2 million degrees Celsius for 95 seconds.

Director Zhao and Ye Wenxin conducted an inspection, and the degree of simulation reached an astonishing 99%.

Zhong Cheng explained that this is because of decades of detailed test data, so the degree of simulation of the system can be so high.

Both Director Zhao and Ye Wenxin were overjoyed.

Then Director Zhao asked Ye Wenxin to operate it five times, and the results were obviously biased.

After the two checked it, they were even more pleasantly surprised that they discovered the problem with the super-tokamak device in such a short time.

Before the Taixu Experimental System existed, it would take five or six years to obtain the results, and the cost was even more astronomical.

Ye Wenxin's mother and daughter immediately devoted themselves to analyzing the problem of the super-tokamak device, leaving Zhong Cheng behind.

Zhong Cheng saw the situation, and within a few days, the two of them would not be able to spare.

When he thought about it, his work here was finished, and he still had a lot to do in Beishan, so he didn't waste time.

While Ye Wenxin's mother and daughter were eating, he expressed his thoughts.

Although Ye Wenxin was reluctant to give up, Director Zhao did not keep Zhong Cheng, saying that he had already taken up so much of his time and could no longer affect his work.

Zhong Cheng bid farewell to the two that afternoon, found Li Shaojie and Chen Yilong, and drove back to Beishan.

Hope they succeed soon!
……

Winter is coming and spring is coming, and it is the best season of the year again.

4 month 12 day.

There is no good news for Ye Wenxin yet, but Zhong Cheng's East China Sea project is getting good news.

The design of the manufacturing process of the relevant parts of the Suzaku fighter has been completed, and the selection of equipment is progressing smoothly.

The leading large chaotic alloy manufacturing factory has been completed!

With an annual output of 100 million tons of various types of chaotic alloys, it can also provide excess production capacity for Beishan's heavy industry while ensuring the demand for Jingwei unmanned fighter jets and Suzaku fighter jets.

This is a project that Beizhong Group is responsible for, and Lin Wei is the chief engineer, and he has contributed a lot.

The factory for finishing the chaotic alloy blanks, which is in charge of the machine tool factory of the Red Star Company, will also be completed, and the shell and skeleton of the Suzaku fighter will be fine.

This is also related to Zhong Cheng's completion of the fighter's shape design ahead of schedule.

Mr. Li Changfeng Li personally took charge of this project, he said that he must put Zhong Cheng's project first.

Production of the Kuafu II power battery will also be completed by June, this time lagging behind because of changes to the original design.

In order to reduce the volume occupied by the power battery pack, the Suzaku fighter is too large, and the Jingwei unmanned fighter's scheme of directly making the body into a battery can no longer be used.

For this reason, under the leadership of Zheng Yilun and Chen Qiang, the technicians of the power battery factory have carried out a large number of technological innovations.

Without tricks, the volume of the Kuafu II power battery was reduced by a quarter without reducing the stored power, so that the overall energy density and power density of the power battery exceeded the [-] mark.

They have surpassed Zhong Cheng in terms of power battery technology, which made him very pleased.

Major progress has also been made in the R&D and production of the large-scale Zhurong electric pusher that Zhong Cheng is most worried about.

Although Yang Xi proposed the design scheme of Russian dolls, this brand new ion engine cannot establish an effective and reliable simulation program due to the lack of supporting data in the Taixu experimental system.

From here, Zhong Cheng also discovered that the Taixu Experimental System is not omnipotent, and cannot play that amazing role in some new scientific research fields.

But with the efforts of Yang Xi and his assistant Luo Na, the production of the first prototype was still completed, and Beifei Company provided great help.

The performance is a little bit worse, but the hope of success is already seen.

With the first prototype, the simulation program in the Taixu Experimental System can play a role.

The progress of other people's projects has also advanced, and everyone's work enthusiasm is very high.

The five newcomers, including Qin Wenyu, performed well and quickly adapted to work at the industrial site.

Although Qin Wenyu was arguing with Zhou Hu, it didn't affect her work. Zhong Cheng was very satisfied with her design of the cockpit of the Suzaku fighter, and she deserved to be a professional doctor.

It seems that one of his blood can't escape!
Qin Wenyu is actually more proficient in life sciences, and ergonomics is just a trivial matter to her.

Zhong Cheng wondered what tricks she could research from his blood.

Wouldn't it be a good thing if we could unravel some of the secrets of thinking ability!
Zhong Cheng calculated the progress of the East China Sea Project. The Suzaku fighter jet came out in September this year without any problem, 9 months earlier than the original plan.

There will be enough time to complete the design of the heavy bomber and transport aircraft.

This credit is also inseparable from the efforts of Cheng Zhidong's management team.

Without their central coordination, command, and scheduling, it would be impossible to make such a fast progress. Zhong Cheng is actually still learning from them in this regard.

Management is also a science!
This morning, Zhong Cheng called Zhao Wei to the Chaos Alloy Processing Factory to find Mr. Li.

Zhao Wei had completed the upgrade of the Nuwa industrial mother machine a few years ago, and Zhong Cheng wanted to see how it worked.

Zhao Wei also brought his apprentice, Fan Chengjun, with him. He was very satisfied with this apprentice, saying that Fan Chengjun was very spiritual, and he was a material for software development.

And Fan Chengjun admired his master's ability so much that he regarded Zhao Weizhen as a "master".

In ancient China, there was a tradition of taking the teacher as the father, but it is almost lost in modern times.

Fan Chengjun's short stature and unattractive appearance are more likely to be recognized by Zhao Wei for this reason.

Mr. Li happily brought Zhong Cheng and the others to his temporary office, eager to make a pot of good tea for the three of them.

Zhao Wei said: "Mr. Li, don't mess around, we can't even taste tea, so a cup of plain water is fine."

Mr. Li didn't take it seriously, and just poured boiled water for the three of them.

This is the beginning of the introduction of the recent situation of the Nuwa industrial mother machine.

After replacing the miniature Fuxi optical computer and the upgraded version of the Cangjie CNC system, the linkage control function of the Nuwa industrial master machine is more powerful, and the processing accuracy is also improved.

Many complex workpieces that could not be machined before can now be machined.

Moreover, the Cangjie CNC system redeveloped based on the Shihuang operating system can now be programmed directly in Chinese.

The difficulty of programming has been greatly reduced, and ordinary workers on site have basically learned to program.

The Cangjie CNC system on the new machine tool sold abroad recently has developed an English operation interface.

Deman people and Dongyang people are planning to use Cangjie CNC system on their machine tools. Of course, the main reason is that Fuxi Optical Computer does not support English CNC programs.

If they want to use Fuxi optical computer on the most advanced machine tools, they can only use Huaxia's CNC system.

Mr. Li sighed: "It's really a turn of events!"

Zhao Wei jokingly said: "General Manager Li, how do you calculate the patent royalty? Cangjie CNC system is not free software!"

"Hey, this company will take everything into consideration!"

Mr. Li then changed the topic, "Zhong Cheng, you guys are here just in time. I need your help with something!"

"Tell me and take a look!" Zhong Cheng has a lot of things on his hands now, so he dare not agree first.

"I want you to develop intelligent robots!"

(End of this chapter)