Start with the aviation industry

Chapter 108 The plan to import CNC broaching machine failed

With the complete set of design drawings and process drawings, Lin Feng was instantly happy, and the next step was to manufacture this CNC broaching machine.

But two things need to be done before manufacturing.First, at least draw the general design drawing of the CNC broaching machine.Second, contract out the equipment sub-factory.

The workshop area of ​​the equipment branch factory is large enough, and there are also basic equipment for the production of broaching machines, as well as a group of experienced workers and technicians who understand machine tools.

The subcontracting equipment branch may have to wait for a few days, but the general design drawing of this CNC machine tool can be drawn first.

At this time, Yang Wenjie came back from the manufacturing site, and Lin Feng ordered, "Xiao Yang, go and get me some blank No. 1 drawings."

"Director Lin, are you sure you want the No. 1 drawing?" Yang Wenjie was a little surprised.

Drawing No. 1 is not small.

0号图纸最大，1号图纸次之，然后是2号图纸，3号图纸和4号图纸。406车间的工艺技术员们用得最多的是3号和4号图纸，连2号图纸都很少用。

No wonder Yang Wenjie was a little surprised.

Lin Feng nodded and said, "Yes, the blank No. 1 glass drawing, please get two for now."

There are two kinds of materials for blank drawings, one is translucent cellophane, drawing on such drawings is convenient for drying orchids later, and the other is ordinary white paper.

Yang Wenjie quickly brought back two sheets of No. 1 cellophane, and Lin Feng spread one of them on the drawing board, and then began to sharpen the pencil.

Some people jokingly say that any great design starts with sharpening the pencil, which is true, because there is no computer drawing, and it is completely done by hand, so the pencil must be sharpened before drawing.

Lin Feng carefully sharpened several pencils with different thicknesses. Thin pencils are used to draw thin solid lines, dotted lines, center lines, section lines, etc., and thick pencils are used to draw contour lines.

The blank drawings were spread out, Lin Feng held a T-square in one hand and a pencil in the other, and after thinking for a while, he drew the first line.

For two or three days in a row, as long as he was free, Lin Feng was drawing the general design of the CNC broaching machine.

At the beginning, Yang Wenjie and others didn't know what Lin Feng was drawing, but on the third day, they finally saw something.

Know that this is the general design drawing of the CNC broaching machine.

"Director Lin, this is a CNC broaching machine!"

"Yes, this is a CNC broaching machine."

"My God, you can even design a CNC broaching machine, that's amazing." Yang Wenjie was so impressed.

He even thought in his heart, what else can Director Lin not know.

In the past two or three days, the incident about the equipment branch factory gradually became louder and less rainy, but two or three people expressed their intention to contract, one was an individual boss, and the other two represented a collective enterprise.

They all backed down when they heard that the annual contract fee was 50 yuan.

In the factory manager's office, Sun Jiangbo and Wang Tianfang were talking about the foreign contracting of the equipment branch factory.

Wang Tianfang said, "Director, it seems that the contract fee of 50 yuan is a bit too high."

Sun Jiangbo nodded, thinking in his heart that he was indeed a little hasty, the threshold of 50 was too high, and had already scared off two or three groups of people.

"Mr. Wang, what's going on with Lin Feng? How is his friend thinking?"

Wang Tianfang said, "There has been no news, maybe the 50 contract fee made his friend retreat."

Sun Jiangbo said, "No matter what, you should find an opportunity to talk to Xiao Lin and test his situation. The contract fee of 50 yuan is not easy to change, but you can give some other support."

"Okay, then I'll talk to him."

The two were chatting about the contracting of the equipment branch factory when the phone on the desk rang. Sun Jiangbo picked up the phone himself, "I'm Sun Jiangbo."

An anxious voice came from inside, "Director Sun, I'm Wu Dilong from the equipment department. Our plan to import CNC broaching machines may fail."

what!
Such a big change happened!

Of course, Sun Jiangbo also attached great importance to this equipment, and his face changed slightly, "Section Chief Wu, Chief Engineer Wang is also in my office, come here immediately."

Soon, Wu Dilong came over.

He reported the situation to the two leaders in more detail.

Not knowing why, let alone who leaked the secret, the German side actually became suspicious. This equipment was not purchased by the manufacturing company in Singapore, but would be shipped to the Phoenix Factory for military production.

Therefore, the German side directly rejected the order, and would not sell it for more money.

Both Sun Jiangbo and Wang Tianfang fell silent.

After a long time, the two sighed one after another.

If they don't sell it, what can they do? The plan to import CNC broaching machines has really come to nothing, and I don't know when Phoenix Factory will be able to have its own CNC broaching machine.

406 Workshop.

Lin Feng checked the two general design drawings again, and felt that there was no problem, and he was very satisfied.

It is worthy of the products produced by the system. Based on Lin Feng's understanding of this CNC machine tool, once it is successfully manufactured, it will definitely meet or even exceed a series of technical requirements put forward by the Phoenix Factory.

It will also be the most advanced high-precision, high-automation CNC broaching machine in China.

After appreciating the two general design drawings, Lin Feng carefully rolled them up and put them away carefully, and told the people in the office that no one should read them.

If the hard-working drawing is broken or damaged, it will be a big loss, and the three days of effort will be in vain.

"Director Lin, Mr. Wang called and asked you to go to his office."

Jiang Haitao came to inform him personally. Just now, Wang Tianfang called his office and asked him to inform Lin Feng.

Lin Feng got up immediately and went to Wang Tianfang's office.

Walking on the road, Lin Feng guessed that maybe it has something to do with the equipment sub-factory's external contracting. I hope my guess is correct.

"Boss Wang."

"Xiao Lin, come, sit here."

Wang Tianfang was very enthusiastic and motioned Lin Feng to sit down on the sofa in the reception area, and he himself sat on the sofa first.

The two sat on the sofa and chatted across a coffee table.

Wuyou let go and asked straight to the point, "How is your friend thinking?"

Lin Feng showed a embarrassed look, "Boss Wang, the main issue is the contract fee, 50 a year is too high."

Wang Tianfang sighed softly, "It is impossible to lower the contract fee. We have already issued a document, and we cannot change this easily."

Hearing this, Lin Feng was slightly disappointed.

The contracting fee cannot be reduced, so if it is 50 per year, should I contract out the equipment branch factory?

Soon, Lin Feng felt a little joy in his heart, as if he saw hope.

Wang Tianfang said, "Although the contracting fee cannot be reduced, our factory will give some support. If possible, I will come and talk to your friend in person."

(End of this chapter)