Reborn 80s

Chapter 236 Our Lithography Machines Bloomed Back then

Chen Huaiqing paid more attention to semiconductors. After all, although the aircraft matter will not produce results for a while, the research and development team is still there. As long as the direction of research and development is adjusted, it will be fine.

However, the semiconductor industry is still in a state of ignorance in China.

To put it bluntly, it is not enough attention.

In the hotel in Beijing, Chen Huaiqing called Song Qi.

"Find a way to let Rongcheng over there, and strive to land the semiconductor factory in Rongcheng."

Song Qi was stunned for a moment. The reason why Chen Huaiqing did this was because he didn't want to put all his eggs in one basket?
Kind of weird!

Song Qi hung up the phone, not knowing why.

In the past, it was clear that the semiconductor factory was going to be built in Yuzhou, but it was said that it would be built in Rongcheng.

Can Rongcheng be more convenient than Yuzhou in terms of transportation?
At this time, there were very few passages out of Sichuan, and the traffic conditions greatly restricted the development of Rongcheng.

Locating the factory in Rongcheng does not seem to be a good choice.

After the product is produced, it always has to be transported.

But what can Rongcheng use to transport it?
Use the plane!
Chen Huaiqing said that it would be transported by plane.

Really, these are exaggerated!

If it is transported by plane, the cost will be a bit high.

As a high-tech semiconductor product, the added value of technology is quite high, and the product is relatively small and exquisite, so there is no problem at all in transporting it by plane.

Rongcheng is a bit blocked in terms of land transportation, but the existence of Rongcheng Airport can be regarded as making up for it a little bit!

Don't think about these things for now, Song Qi feels that since the boss Chen Huaiqing changed his mind, there must be his considerations.

How to follow Chen Huaiqing's request, quietly let Rongcheng know, and fight for it?

In Shuchuan, Rongcheng and Yuzhou are like two brothers in the family. They both need to develop and need resources for development.

However, the entire resources of Shuchuan are limited.

Undoubtedly, this has become a problem.

No matter how much you give to that city, there will definitely be some complaints in another city.

Compared with Yuzhou, Rongcheng's economic development is much inferior.

Yuzhou's economy is already going to the sky. In the motorcycle and automobile industries, the speed of development can be described as rapid.

Rongcheng has not yet found its own development direction.

The gap widens...

Anyway, Song Qi was sure that as long as Rongcheng knew the news, he would be extremely interested.

Song Qi thought about it for a while. He couldn't tell Rongcheng directly about this news.

The sale on the pole cannot be done!
Therefore, we have to pay attention to strategy.

You have to pretend that the news leaked out unintentionally, and let Rongcheng fight for this opportunity.

Then, under the advice of Rongcheng and the province, the semiconductor factory was put in Rongcheng.

Chen Huaiqing didn't care how Song Qi managed to settle this matter. At this moment, he was sitting in a conference room of the Fourth Department of Machinery, with a large pile of thick documents in front of him.

Look at the information given to me by the Ministry of Machinery.

There is a feeling of refreshing the three views.

Yes, Chen Huaiqing's three views have been greatly refreshed.

Lithography!
At this time, Huaguo is not much worse than its international counterparts in the field of lithography machines.

The lithography machine is the core part of chip manufacturing, and this is where Huaguo is most seriously stuck in chip manufacturing.

Without the most advanced lithography machine, chip manufacturing can only rely on the process to make up for the lack of hardware.

But this kind of compensation cannot solve the fundamental problem. To put it bluntly, it is a temporary solution rather than a permanent cure.

If you want to get rid of this embarrassing situation, you still have to have the most advanced lithography machine.

In the past, Chen Huaiqing really didn't know much about the situation of domestic lithography machines.

I just know that Shencheng Microelectronics is the most advanced lithography machine research and development and manufacturing unit in China.

Shencheng Microelectronics Co., Ltd. has developed a 90-nanometer lithography machine, but because it uses a large number of foreign components, it is directly cut off by foreign component manufacturers.

The lithography machine developed by Shencheng Microelectronics Company has no way to achieve mass production.

The inability to achieve mass production of products means that the R&D expenses invested in the early stage cannot be recovered.

Shencheng Microelectronics can only turn to research on the front-end lithography machine.

Front-end lithography machines are mainly used in semiconductor screens.

Yes, the screen is also produced by a lithography machine.

But now someone told Chen Huaiqing that Huaguo's lithography machine is not bad.

Chen Huaiqing looked up at Zhao Jiansheng: "Leaders, are you sure that the information you showed me is not adulterated?"

The first lithography machine landed in the middle and late 60s,
In 1980, the automatic alignment distributed projection lithography machine was successfully developed, and the thinnest line width processed was 0.8 microns.

At this time in China, there are quite a few lithography machine R&D teams. It doesn't seem like the last one is Shencheng Microelectronics.

Factory 109 is a pilot plant for the development and production of high-tech semiconductor devices and integrated circuits.

Zhao Jiansheng sneered: "Why, surprised?"

Chen Huaiqing: "It's not only surprising, but also unbelievable. Originally, I thought our lithography machine technology was very backward, but I didn't expect that the country has developed to this level."

At this time, the gap between the domestic lithography machine technology and the world's most advanced level will definitely not be too big, and it may be within five years.

It is not like after the 21st century, this gap has been widened to four generations.

When it comes to the EUV lithography machine, the lithography machine is the fifth generation!

In other words, at this time, the level of domestic lithography machines is in the second generation.

Of course, the level of lithography machines worldwide is still in the second generation.

It's just that when the second generation was developed, problems appeared in the development of domestic lithography machines.

The main issue is commercialization.

There is still a gap between domestic lithography machines and foreign lithography machines. Once there is a technological breakthrough in China, foreign countries will follow suit and sell lithography machines that were not sold before to domestic lithography machine manufacturers.

Then the domestic lithography machine will naturally lose the market directly.

After entering the market economy era, projects that are not profitable are no longer good projects.

So the result is that there is no market for domestic lithography machines, and there is no research and development funds. Naturally, there is no way to carry out the next research and development work, and the research and development team is gradually disbanded.

The development of lithography machines has also been gradually abandoned.

After all, many people at this time have such an idea in their hearts. The technology made by themselves is backward, so why not buy more advanced foreign ones.

Buying is worse than making has become the mainstream view at this time.

Chen Huaiqing: "I want to meet Xu Ruiyi from Huaqing University."

Chen Huaiqing has some impression of Xu Ruiyi's name, the father of Huaguo CD-ROM.

Why are discs so cheap?

Because the Chinese people got involved.

Chen Huaiqing really didn't know that Xu Ruiyi actually developed a lithography machine in the past.

There were results in the 70s.

Now, a step-by-step projection lithography machine is being developed.

Chen Huaiqing had to lament that if it weren't for the economic strength of Huaguo at this time, there would be foreign affairs.

Scientists in Huaguo really do not lack ingenuity, as long as they are given appropriate support, they can directly beat the world.

(End of this chapter)