Reborn 80s

Chapter 736 Material Support
Last year, Mota Machine Tool sold a total of 13.6 sets of various machine tool products, of which CNC machine tools accounted for more than 80.00%.

In the field of domestic CNC machine tools, Mota Machine Tool is an absolute vanguard, even if compared with foreign CNC machine tools, it will not be much worse.

It may be worse than their most advanced ones in terms of accuracy, but don't forget that in normal industrial production, the requirements for accuracy are not so high.

The performance of the CNC machine tools produced by Mota Machine Tool can fully meet the needs of daily production, and the performance is still overflowing.

The most important point is that the price of CNC machine tools of Mota Machine Tool is slightly lower than that of other machine tool companies.

On the price, it didn't say that it should be directly marked as a cabbage price.

If someone sells it for 100 million, I certainly can't say that I sell it for 50, and I can't say that the price has been reduced like this.

Just get a 80% discount and sell it for [-].

If the opponent dares to continue to lower the price, then it will continue to drop.

No matter how low the price is, according to the cost of the Mota machine tool, it is still profitable.

Just clear out some of the players in the market, and after several large companies are formed in the market, everyone will tacitly raise the price slowly.

No way, consumers have no choice.

If you want, you can only buy things from these few companies.

Therefore, when the market is controlled by two or three companies, that is when the market starts to lose its vitality.

When the market is controlled by one firm...

Anyway, the price of the product will be particularly expensive.

CNC machine tools are mechatronic products, flexible and efficient automatic machine tools.

It solves the complex, precise, small batch and multi-variety parts processing problems very well.

The CNC machine tools of the entire Mota Machine Tool are all machine tool control systems developed by Mota Machine Tool itself.

As for the control chip inside the machine tool, it is an industrial control chip specially developed by Sixiang Technology.

Compared with the latest Xuanwu 6Plus in terms of computing power, it must be worse.

However, what industrial chips pursue is not extreme performance, but stability.

It cannot be said that when the part was processed halfway, it suddenly crashed.

It's like, I was typing a document on the computer, and I was halfway through typing, and suddenly the power was cut off.

The most frightening thing is that I use a desktop computer, and I even have the intention to kill people.

In the past, this kind of situation was often encountered, so the automatic saving function was introduced. Even if an accident occurs, there will not be many lost things.

Of course, the more functions there are, the higher the performance requirements for the computer.

With the continuous advancement of semiconductor manufacturing technology, microelectronic chips are becoming more and more powerful in terms of performance.

Chen Huaiqing looked at the CNC machine tool being assembled, and now the control computer of the machine tool is being installed.

The computer is produced by Chenxing, a computer specially produced for machine tools.

The computers used on many machine tools can still be used normally even after 30 or [-] years.

In terms of running speed, there is no problem at all.

The machine tool is quite long in terms of service life.

In many factories, machine tools produced before and after World War II can still be found. These machine tools are still in operation as the main production equipment.

The service life of CNC machine tools is not required to be as long as that of traditional machine tools, but it cannot be said that it will be scrapped in less than ten years!
What's the matter, you have to persist for 30 to [-] years.

The computer specially developed by Chenxing for CNC machine tools is now excellent in terms of anti-shake, flying dust and stability.

In terms of design ideas, it must be very different from the civilian computers currently on the market.

The pursuit of civilian computers is more about performance, and then it is more thin and light.

And this kind of machine tool control computer does not need to say that much effort has been put into thinning and thinning. The more important point is that the performance meets the requirements and the operation is stable.

Therefore, when writing the entire control system, the code should be simplified as much as possible.

Don't use two sentences that can be explained in one sentence.

The leaner the code, the less chance of problems.

Chen Huaiqing picked up a box of machine tool knives on the side. These knives were not produced by Mota Machine Tool, but by a company affiliated to Yuzhou Special Steel.

Yuzhou Tool Manufacturing Co., Ltd.

Yuzhou Tools develops and manufactures cutting tools for machine tools, mainly high-speed steel and hard alloy cutting tools.

There are five main types of machine tool tool materials: high-speed steel, cemented carbide, ceramics, cubic boron nitride and polycrystalline diamond.

The research on the other three knives is basically not involved in Yuzhou tools.

After all, Yuzhou Tools, as a subsidiary of Yuzhou Special Steel, naturally has an extremely high advantage in metallurgy.

Yuzhou Special Steel has lived a pretty good life in these years, and the domestic demand for special steel is increasing day by day.

As the most technologically advanced special steel manufacturer in China, Yuzhou Special Steel is naturally making a lot of money.

The net profit earned in one year is quite good.

Last year, Yuzhou Special Steel produced 250 million tons of various special steels, and its revenue from steel reached more than 70 billion.

This year, Yuzhou Special Steel aims to break 100 billion in revenue.

The third phase of the new factory of Yuzhou Special Steel will be completed and put into operation in May this year. After it is put into operation, Yuzhou Special Steel will transfer a group of people from the old factory to the old factory, and the two furnaces will also be carried out on the old factory. shutdown.

After shutting down, the next step is to demolish it.

After the demolition, a park will be built first for environmental restoration.

After ten years of storage, it will be developed into a commercial housing complex or the like.

As for the industrial exhibition and the like, Yuzhou Special Steel is not interested.

Yuzhou Special Steel is a listed company, so it has to be responsible for the shareholders of the company.

The greatest responsibility to shareholders is to continuously earn profits for shareholders.

With the commissioning of the third phase of the project and the closure of two blast furnaces in the old area, the production capacity of Yuzhou Special Steel will be expanded to an annual output of 300 million tons.

I dare not say that the production capacity will be directly increased to 500 million or even 1000 million tons.

Yuzhou Special Steel mainly produces three types of special steel: tool steel, special steel and structural steel.

Mota Automobile is the largest customer of Yuzhou Special Steel.

Among the main raw materials for automobile manufacturing, steel accounts for 72%-88%, of which special steel accounts for 30%.

Special steel for automobiles accounts for 40% of special steel production.

Shafts, rods, and gears are all made of special steel.

In addition to cars, there are also airplanes, but as for airplanes, only a few are produced a year, and not many are actually used.

For special steel for railways, both rails and trains are needed.

In the past, Yuzhou Special Steel obtained a lot of information from the former alliance, many of which were formulas, and there were deficiencies in craftsmanship.

Many of the crafts are handed down by word of mouth among workers.

It is not recorded on paper at all.

Therefore, Yuzhou Special Steel must continuously conduct process tests.

To improve the craft, we can only try more and find the optimal solution continuously.

(End of this chapter)