Reborn 80s

At the end of September, Chen Huaiqing went to the capital to hold a commendation meeting first.

Baifu Retail Group received a commendation. During the flood, the logistics warehouse of Baifu Retail played an extremely important role in material security.

The supply of materials in the disaster area was guaranteed, and there was no obvious increase in material prices.

All the supermarkets under Baifu Retail are operating normally, and the goods in the supermarkets are extremely sufficient.

After Chen Huaiqing came to the capital, he naturally went to Mota Microelectronics to have a look.

Since Mota Microelectronics' lithography machine parts procurement was hindered two years ago, Mota Microelectronics has strengthened its determination.

It is necessary to continuously improve the localization rate of lithography machines.

In the past, it was Chen Huaiqing who came to urge it to be done, but Chen Huaiqing could not say that he had been staring at it all the time. Sometimes, in order to pursue better efficiency and convenience, everyone directly used international ones.

After all, in the past, Mota Microelectronics was not restricted in the procurement of parts.

Basically, you can buy anything you want.

But this situation changed a few years ago.

The new generation of lithography machines of Mota Microelectronics could not be produced at all, not to mention how much damage it caused to Mota Microelectronics, it was also an extremely annoying thing for the R&D team.

Not only have to re-develop, but also delay everyone from getting technology dividends.

The Mota300 lithography machine at that time was supposed to be the most advanced lithography machine in the world. Mota Microelectronics will occupy the top of the global market in one fell swoop, and beat the two lithography machine companies of Neon to the ground.

According to normal market competition, Mota300 will indeed be invincible in the market.

Moreover, the Mota300 lithography machine is used to produce the Xuanwu 7 chip, which will be the most advanced chip in the world, and the performance of the chip will crush other chips.

In January 1996, it was produced in small batches.

As long as there are enough Mota300, it can be launched in large quantities.

But all of this was delayed because the initial version of Mota300 could not be mass-produced smoothly.

The domestic version of Mota300 was successfully developed, and after debugging, the Xuanwu 7 chip was officially released in the second half of 1997, and it was supplied in small batches.

In the market, it is difficult to find a "core".

In 1998, the output of Xuanwu 7 chips increased to meet market demand.

By this time in 1998, the price of computers had also dropped further.

It should be said that the price of the previous generation of computers has dropped, but the price of the new generation of computers has remained stable.

Xuanwu 6 and Xuanwu 6plus are quite mainstream in the market, and many computer products still use these two chips.

Compared with the latest Xuanwu 7 chip, the prices of these two chips can be described as cheap.

Become an assembler favorite.

As for the Xuanwu 7 chip, the main suppliers are rarely seen on the market.

This is a strategy of Sixiang Technology, which is to supply in large quantities and not to engage in retail sales.

The priority is to ensure the interests of computer manufacturers, so that computer manufacturers can purchase more products from Sixiang Technology.

After all, Sixiang Technology does not mean that it is dominant in the market.

In the global market, Sixiang Technology has quite a few competitors.

If Sixiang Technology achieves a monopoly, then it can do whatever it wants.

But now, no!
In fact, judging from the development of Iter Company, after Iter monopolized the PC chip market in fact, various computer manufacturers are also very disturbed.

Otherwise, after AMD's new chips come out, AMD versions of computers will not be launched one after another.

At this time in the international market, there are really many powerful chip companies.

More than half of the world's top ten chip companies are located in North America at this time, and in the mainland, it is just a single seedling of Sixiang Technology.

The other is the chip company on the Neon side. At this time, the Neon semiconductor company still looks strong, but it is in a period of decline.

Mota Microelectronics was suppressed before, which affected the entire semiconductor industry chain.

This is also to let everyone clearly realize that if you want to climb to the top, there will definitely be various difficulties and hardships along the way.

Then you must strengthen yourself so that you don't have any weaknesses that can be attacked by others.

Now the research and development team of Mota Microelectronics no longer gives priority to purchasing parts from abroad when conducting research and development.

Instead, give priority to the use of domestic products, and use foreign ones if it really fails.

The rapid development of the entire semiconductor industry has also driven the development of other industries.

The importance of the semiconductor industry is becoming more and more prominent, and the domestic semiconductor industry is now a dominant industry, and the country will naturally invest more resources to support it.

All major colleges and universities basically have the conditions, and all of them have set up computer courses, and the major of integrated circuit design is also a must-have major in science and engineering universities.

If the development of an industry does not have enough talents to support it, it really cannot develop.

In Mota Microelectronics, Chen Huaiqing saw the latest products of Mota Microelectronics.

"This is the most advanced lithography machine Mota260 that we have mass-produced and sold at this stage, and now all supply the needs of Mota Semiconductor."

The lithography machine of Mota Microelectronics must give priority to the supply of Mota Semiconductor.

Of course, if other semiconductor manufacturers want to buy them, such as Iter and Baoji, Mota Microelectronics will also sell them.

The price above is the same as selling it to Mota Semiconductor, and there will be no price increase or the like.

Because when it was sold to Mota Semiconductor, the price was already expensive enough.

With the development of technology, the current lithography machine technology is really different from that of ten years ago.

Before 1985, the chip manufacturing process was still at the micron level.

And now, it has already entered the nanometer level.

1 micron = 1000 nanometers.

The diameter of a strand of hair is 80-90 microns.

The technical difficulty is getting higher and higher. As long as many lithography machine companies fall behind in technological development, it can basically be said that they will fall behind directly.

In the stage of rapid technological development, it is basically impossible to catch up after falling behind.

Unless what?
The development of technology slows down, or even falls into a stage of stagnation. As long as a certain enterprise can persist, it will always catch up one day.

"Other companies, do you want to buy?"

"Have!"

Chen Huaiqing tapped his fingers lightly on his legs, and he was thinking.

Giving all the lithography machines to Mota Semiconductor is naturally extremely beneficial to the development of Mota Semiconductor.

Mota Semiconductor is the world's largest semiconductor foundry company.

Mota Semiconductor's competitors are companies like Baoji, while Sixiang Technology's competitors are companies like Iter.

As for the competitors of Mota Microelectronics?

Now there are not many lithography machine companies in the world, led by the two lithography machine companies of Neon and Mota Microelectronics.

There are also some other lithography machine companies, and their lives are not too good.

Mota Microelectronics' mid-to-low-end lithography machines are much lower than them in terms of price.

They simply cannot compete.

Regardless of the front-end lithography machine or the back-end lithography machine, the strength of Mota Microelectronics is super strong.

There are still rivals for the front-end lithography machine, but for the back-end lithography machine, Mota Microelectronics is the first in the industry, directly knocking out the Neon lithography machine company from this market.