The ironware I made shines

Chapter 113 Tang Dao
Ge Xiaohua thought to himself: "Did Dad write my name and his name on the paper?"

No matter what is written, quenching is the key. Ge Jianguo's focus is on the knife blank and the furnace, and he is ready to quench at any time.

Although Ge Jianguo has been idle for so long, he still has experience in forging iron. Knowing that it is time for quenching, he immediately pulled out the knife blank, and then decisively immersed it in the sink.

The knife embryo rapidly dropped from high-temperature austenite to low-temperature martensite. The strong pressure caused some bending of the blade, which was not as large as a samurai sword, but a slight bend could be seen upon careful inspection.

After the quenching was completed, Ge Jianguo breathed a sigh of relief. Ge Xiaohua carefully inspected the blade and said, "Dad, is it normal for the blade to bend? Didn't it mean that one of the differences between the RB knife and the Chinese Tang knife is the curved and straight edge?"

"No matter what kind of knife, if it is quenched under the Baotou method, there will always be a change in the degree of curvature, but the curvature is large and small. This is not the way to distinguish between Tang swords and samurai swords. The most important thing is the decoration and cutting edge. area."

Ge Jianguo carried out polishing and polishing, firstly polished the lower knife blank, and then handed it over to Ge Xiaohua for polishing.

"Look, isn't the area of ​​the blade very different from that of a samurai sword?"

"Yeah, the cutting edge area of ​​the Tang Dao is only about a quarter, so is it not as sharp as the Samurai Sword?"

"This is not absolute. It still depends on each person's craftsmanship. Sharpness is just a form of expression. The large blade area can indeed increase the sharpness, but it cannot compare with Tang Dao in terms of armor penetration."

"Oh, you mean that the larger the blade area, the better the sharpness is, and the relative blade and blade will be very fragile?"

Ge Xiaohua got it right, and said his guess. Ge Jianguo nodded and said, "Yes, this is also one of the reasons why, in ancient times, katana swords were easy to curl and break when fighting."

After the father and son were quenched, their hanging hearts were relieved. When polishing and polishing, they will be much more relaxed and interact with each other, and all of this will be filmed. How to edit depends on whether the program team is strong in the later stage.

In the later shooting, Ge Xiaohua was basically at work, such as grinding and polishing. Ge Xiaohua was already handy. Ge Jianguo gave some advice, and most of the time he was chatting with Guo Caixia, and introduced some common sense to the audience as a master. In the next two days, Ge Jianguo took advantage of Ge Xiaohua's polishing and was not idle. He made the scabbard, handle, and neck of the knife. I have to say that Ge Jianguo's craftsmanship is still better than Ge Xiaohua's. The sheath is magnificently made, which is completely different from the samurai sword. At first glance, it can only be owned by wealthy children. The Tang sword itself has many decorations on the scabbard and handle, and it is mainly made of jade. Gentleman's code name, it matches the sword very well, and a good jade pendant can increase the value of the sword.

When the finished product appeared, the film crew shot a lot of close-ups. This Tang knife is a masterpiece of the father and son, and it will be presented in the second issue. It is more careful than the Ming Dynasty long knife made at the beginning.

Luguang Tang Dao: 105cm in total length, 26cm in handle, and 71cm in blade length.

Although it is only green light, but the base value is high, that is to say, even without light, it is still a rare work of art.

With green light, its attributes will be higher.

"Sharp +5, Strong +6, Exquisite +4, good, good, combined forging, although the attribute value of the light is not very high, but you can learn a lot, the craftsmanship itself is very sophisticated, probably not the same as Blu-ray Comparable." Ironware has a comprehensive value in this aspect. What it owns is innate attributes, and what is acquired is brought up by light. The two ironwares jointly made by Ge Xiaohua and Ge Jianguo are like this, so they cannot be judged by the level of light. Judging the size of this ironware, it’s just that the attached attributes are better than those without it. Under the same quality, it must be more shiny, but if the level of forging is not very good at the beginning, even if it is brightened, it may be as good as a high-quality ironware. almost.

This is why Ge Xiaohua tried his best to attract the skills of blacksmiths. Not only can the probability of making the ironware be brighter, but the quality of the ironware will be greatly improved. This is not as simple as 1+1=2. There will be a huge qualitative change.

After the filming of the father and son forging plot of the second episode of the show, post-editing is still needed, and this is only less than half of the entire show, and the other half needs to be filmed in the United States, which is the scene of the show "Thousands of Hard Work", although it is possible Due to copyright reasons, only Ge Xiaohua's images and some content can be filmed, but there will be some further cooperation, which requires the program team to communicate with the United States.

How to do it specifically, based on the relationship between John and Ge Xiaohua, at least Guo Caixia will not be too embarrassing. This will make the content behind "Extraordinary Blacksmith" richer. Guo Caixia knows that the first episode is just a test of the water, and won the ratings champion of Guixi TV Station I can't explain anything, because the traffic is not large, and there is no zero point for others, and it cannot reach the level of breaking 1. This is restricted by the viewing volume of the TV station itself.

Therefore, we can only go to the Internet platform, and the broadcast volume of Tencent Video is what Guo Caixia pays attention to, so the second period is the moment to really test the quality of the program.

Ge's blacksmith shop was bustling for a few days, and then it was over in an instant. Ge Xiaohua could finally be quiet for a few days. Because his parents had to go to work, they left on Monday, and the film crew completely moved out on Wednesday. After shooting, post-processing will be carried out later, and the shooting in the United States is also in communication.

The Tang knife that was built is also stored in the house. It is a kind of commemoration. After all, there are not many opportunities for father and son to jointly build. Over the years, only two have been built, one long knife and one Tang knife. If you are short of money, it is not bad to keep it at home for decoration, and it is also a kind of capital to show off.

For Ge Jianguo, it is a sense of accomplishment to start blacksmithing again, and to be able to create two exquisite and sharp knives together with his son. For Ge Xiaohua, the biggest gain in forging iron with his father Ge Jianguo is to learn To a lot of technology.

No matter where and in what country, the craftsman will keep a hand, and there are no secrets in the inheritance between father and son. He will guide you wholeheartedly and tell you everything he knows and doesn’t know. on my own.

Although Ge Jianguo only came once in a while, it also allowed Ge Xiaohua to go further on the road of blacksmithing, so that he would not deviate from the road and start doing useless work. This is the most terrible thing.

After Ge Xiaohua finished filming the forging scene, he was free and planned to go to the county town to relax and relax. He didn’t go to the square to popcorn for a while. The director of the vehicle management office always asked when he was free in WeChat. Ge Xiaohua He just found time to come, and he planned to go to the square popcorn to play, and he also bought novelty gadgets online, and planned to try his hand.

(End of this chapter)