The ironware I made shines

Chapter 415 Code GXH01
Ge Xiaohua is used to drawing by hand now, and may not be used to working on the first draft on the computer. It took three days to finalize the first draft of the engine, and then it was a perfect simulation on the computer, which was obtained from Mercedes-Benz through Thor's relationship. A lot of exclusive software simulates the parameters and performance of the newly developed engine.

Debug the performance of the engine through computer simulation, and optimize the acceleration from [-] kilometers, starting, maximum speed, matching, etc. With a set of computer software from Mercedes-Benz, Ge Xiaohua can simulate in all aspects, otherwise he can directly draw The first draft is created, and it is not easy to rework if there is a problem, so the efficiency will be much lower.

When they learned that Ge Xiaohua was researching the engine and conducting a new engine research, the Mercedes-Benz executives were surprised. When Ge Xiaohua’s engine prototype was almost researched, the Mercedes-Benz executives sent an invitation to hire Ge Xiaohua as a consultant, and they could use the resources of Mercedes-Benz for research. .

Of course Ge Xiaohua knew the benefits of cooperating with Mercedes-Benz, but he still refused. Once he becomes a consultant of Mercedes-Benz, he can only rely on Mercedes-Benz in the automotive industry. Bold ideas, bolder than before!

"Nowadays the big entrepreneurs in China all want to make cars, but they spend money to make cars. They buy parts from car manufacturers around the world, such as engines, gearboxes, clutches, chassis, and even the appearance of cars. It’s designed by a knife, it’s not building a car at all, but assembling it! It’s better to compare whose capital is strong and who’s better at fooling around.”

Ge Xiaohua is simulating the performance of the engine. In the preliminary stage, it has reached the level of Honda and Volkswagen engines in the 90s. Although it is only simulated by the computer, the performance and parameters have reached that level, but it is still unknown how the real performance will be. .

However, after simulating the performance of the engine he designed, Ge Xiaohua plans to open a car factory by himself to build Chinese cars!
"Manufacturing a car doesn't cost tens or tens of billions. Don't think about it, but now I have a few hundred million and it's enough to get started, and the core competitiveness of my car is to build my own engine." Ge Xiaohua grasped the core opportunity first, Then get involved in other fields, first thoroughly research the engine, and master a few core technologies, then you can start your own car factory. The 2.5 million on his card didn’t feel like there was any place to spend it, so he kept it to collect interest. You don’t have to worry about eating and drinking. It’s a bit of a salty fish. Now, through research on engines, two Volkswagen and Honda engines were dismantled at the scrapping factory decades ago. Ge Xiaohua has researched the prototype of the engine he designed, although he has not actually built it. , but the performance of computer software simulation is still very good.

With technology, capital, and ability, Ge Xiaohua also had the same dream of building a car as other Internet tycoons!And his car building is not simply assembling, but truly mastering the core technology!

The first step is to build your own engine. Although the performance of the first-generation engine can only maintain the level of Volkswagen and Honda 30 years ago, it is comparable to the level of domestic engines. After all, domestic engines still rely on Mitsubishi’s technology. Engine technology from 30 years ago.

Therefore, even if Ge Xiaohua takes out this computer-simulated engine, domestic automakers will buy it out at a high price, but what Ge Xiaohua has to do is not limited to this. Men love cars and prefer to build cars. They used to have no conditions, but now they do. Technology and capital, Ge Xiaohua now has a clear goal, which is to use technology to open a car factory!
"First settle down for a few years, and wait until all the technologies have been learned and can be truly built, and then open a car factory. Now it is just a few cars to make a name for itself in the international car field."

Ge Xiaohua intends to make a name for himself in the automobile industry by building cars by hand. After gaining fame, he will start a car factory with the technology he has mastered. The assembly lines are all bought out, but there is no rush now, you can slowly study the technology and be a quiet technical geek.

"It's been simulated for a month, and the GXH01 is performing well. It's time to start building it. How is the performance of the hand-built engine?" Ge Xiaohua named this engine GXH01, which is the abbreviation of his name and a code name for future engines. He doesn't know whether this engine will be famous in the automotive field in the future, but concentrating on doing a good job with the engine for some competitions and the like should make him famous.

He spent a lot of energy, Ge Xiaohua just to manufacture an engine of his own, in order to pave the way for the future development of a technical car factory.

Ge's blacksmith shop, forging studio, Ge Xiaohua's first time building a car engine in a blacksmith shop. The car engine, which seems to have nothing to do with the profession of blacksmith, has a close connection in Ge Xiaohua's hands.

Through manual forging, Ge Xiaohua made all the parts of the engine by forging. Although there was a CNC lathe, he did not use it. Most of the parts were forged by hand.

"The parts made by CNC lathes seem to have high precision, but in fact they are not as reliable as those made by old blacksmiths like me. Besides, there are examples of hand-forged high-precision parts in aviation, high-tech, and aerospace fields. They can , I can do it too." Ge Xiaohua is very familiar with the structure of GXH01's engine parts, designed it independently, and simulated it in the computer for several months, and spent a lot of energy dismantling the old engine, so He was already an expert in engines.

In one day, Ge Xiaohua only built a few engine parts. According to this progress, it will take at least three months to build all the engine parts, because each screw must be hand-made and oil quenched. , High-precision parts need oil quenching, and the stability will be stronger. Water quenching is suitable for blacksmiths, such as swords, farm tools and the like, which do not require high precision.

After a busy day, Ge Xiaohua looked at the golden wheel guarding the door, touched its head, and said affectionately: "Golden wheel, I'm sorry for you."

Ge Xiaohua was too busy during this time, and he didn't take care of Jinlun, Meteor, and Xiaochi at all. As Ge Xiaohua's pet partner, he was extremely incompetent as the owner, but in order to be able to create the first Chinese self-developed and hand-built Ge Xiaohua had no choice but to grit his teeth and insist on a purely handmade car engine.

"Let's go, play Frisbee!" When Ge Xiaohua was free before, he built an iron frisbee, and it exploded with white light. The attribute is relatively rare joy +5, which must be of great help to the now depressed Jinlun.

Ge Xiaohua, who was dirty, just came out of the studio, and played Frisbee with Jinlun outside the yard. The specially made iron Frisbee was thin enough to be able to fly, and the strength was slightly weaker, so Jinlun could catch it.

After playing for about 15 minutes, Ge Xiaohua couldn't stand it any longer. With the attribute bonus of Iron Frisbee's joy +5, Jinlun's mental state recovered, unlike just now, it seems that the joyful Frisbee is still useful.

"Okay, Jinlun, I'm going to take a shower and rest. I've been busy all day." Jinlun was very considerate, and ran to play by himself, while Ge Xiaohua made time to take a bath and rest, saving money to build the next day. The power of engine components.

(End of this chapter)