Peerless Tangmen: The Dragon God Comes to the World

Chapter 18 Level [-] Soul Guidance Device - Hand Cannon.

Xuan Ziwen said, took out a few blueprints, handed them to Electrolux, and said:
"These are relatively common first-level and second-level core formations. You take them and familiarize yourself with them first. I will teach you how to describe the core formations later."

Electrolux took the drawings.

The core formation on the drawing is not difficult for Electrolux to memorize. After a glance, a complete model of the core formation appeared in his mind.

In terms of difficulty and complexity, Electrolux feels that these core formations are much easier to remember than the magic pattern of the fifth-level magic.

Of course, this may be because the core formation is too low-level.

Electrolux couldn't help guessing.

However, generally speaking, these first and second level core formations are not a problem for Electrolux at all.

After 10 minutes, Electrolux returned all the blueprints to Xuan Ziwen and said, "Teacher Xuan, I have written it all down. Now you can teach me how to draw the core formation."

"Write it all down?" Xuan Ziwen's expression was exaggerated, a little unbelievable.

Although the patterns of the first and second core formations are relatively simple, Xuan Ziwen gave Electrolux at least a dozen blueprints. Logically speaking, no matter how fast it is, it will not be so fast!
Xuan Ziwen didn't suspect that Electrolux was telling the truth, it should be that Electrolux has strong mental power and excellent memory.

"Okay, then I will teach you how to draw the formation."

As Xuan Ziwen said, he conjured a lump of metal out of thin air.

The metal is dark gold in color, irregular polygonal, about the size of a basketball.

"This is Yanyang Iron, a rare metal. Now I will teach you how to draw the core formation. Come with me."

Xuan Ziwen took the Yanyang Iron and walked ahead, stopping beside a stove.

Electrolux stopped, and Xuan Ziwen continued: "To make a complete soul guide, the materials must be purified, shaped, quenched, and polished."

"After the polishing is completed, the part containing the core formation has to be described. Finally, all the parts of the soul guide are assembled."

"In this way, a finished soul guide is considered complete."

As Xuan Ziwen said, he handed the Yanyang iron to Electrolux, and said to Electrolux: "Now, I will teach you how to purify the materials first."

Electrolux took the Yanyang iron with an eager expression on his face.

"Turn on the stove first."

According to Xuan Ziwen's instructions, Electrolux turned on the stove.

"Put the Yanyang Iron in the stove to heat it up."

Electrolux manipulated the stove and put the Sun Iron into the stove.

"After the Yanyang iron is heated, pick up the hammer on your left and hit the Yanyang iron."

……

Not long after, there was the sound of knocking on metal in the room.

……

"Teacher Xuan, are you ready now?" Electrolux wiped the sweat off his face with his left hand, and turned to look at Xuan Ziwen.

Xuan Ziwen shook his head, and said bluntly: "Not yet, you still have a lot of magazines in this Yanyang iron."

"With your pure Yanyang Iron, whether it is assembling an offensive or defensive soul tool, it will leave a lot of disadvantages."

"Take the attack-type soul guide as an example. Maybe the soul guide will explode directly when it compresses the energy."

After hearing this, Electrolux turned his eyes back to the Yanyang iron, and continued to swing the hammer, enjoying it endlessly.

……

Seeing that the purification steps of Yanyang Iron had been completed, Xuan Ziwen stopped Electrolux, took out a blueprint and handed it to Electrolux.

"This is the blueprint of the first-level soul tool—the hand cannon. You should familiarize yourself with it first. After a while, use purified Yanyang iron to shape the parts that the hand cannon needs to assemble according to the blueprint."

Electrolux took the drawing from Xuan Ziwen's hand, unfolded it, and began to study it.

The hand cannon has a total length of 30 cm, two ports at the front and rear, and a compartment in the middle. It consists of five parts, namely the gun body, muzzle, energy gathering device, compression device and launcher.

Seeing that the time was right, Xuan Ziwen began to tell Electrolux the basic knowledge and precautions of body shaping.

……

Electrolux used a tool to take out the Yanyang iron purified in the stove and sent it to the cutting device.

After a while, five pieces of Yanyang Iron of different sizes appeared on the special heat-resistant table.

Electrolux picked out the largest piece of sun iron and sent it to the stove.

The stove was turned up to maximum heat, and the Electrolux began to shape.

Electrolux intends to use this piece of Yanyang iron to shape the gun barrel.

The sound of clashing metal echoed in the room again.

According to the drawings, Electrolux shaped all five parts of the hand cannon and placed them on the high-temperature-resistant table.

"Teacher Xuan, you can teach me how to quench fire now." Electrolux looked at Xuan Ziwen.

"No hurry." Xuan Ziwen said.

Electrolux wondered.

"It's past noon now, let's go eat first."

Xuan Ziwen explained the reason, it turned out that he was hungry.

Electrolux looked at the hand cannon parts on the table, and asked Xuan Ziwen: "Teacher Xuan, will it be okay to leave it like this?"

"Of course not." Teacher Xuan paused for a moment, and then said: "Now put these hand cannon parts in the stove, and turn the stove to mid-range."

Electrolux fetched the equipment, put the hand cannon parts into the stove one by one, and then adjusted the stove to mid-range.

"Electrolux, let's go, the food in the cafeteria is still good."

Xuan Ziwen greeted Electrolux and walked towards the cafeteria.

……

After eating, Electrolux pushed the door in and walked straight to the stove.

Xuan Ziwen was behind, explaining quenching to Electrolux.

"Electrolux, you have to remember that quenching and sculpting the core formation are the two most important steps in making a soul guide. If you are not careful, the whole piece of metal will be scrapped, and your previous efforts will also be turned into nothing. Foam."

"Let me tell you about quenching first."

"Quenching means to continue heating the shaped metal. After heating to the limit temperature, put the metal into the liquid to make the temperature drop rapidly, so as to improve the rigidity, hardness, wear resistance, fatigue strength and toughness of the metal again. promote."

"The most important thing to pay attention to in quenching is that the limit heating temperature of the metal must not be exceeded, otherwise, once the metal is quenched and cooled, it will be scrapped directly."

"Of course the temperature is too low."

"If it is too low, the purpose of quenching will be lost."

After Xuan Ziwen finished speaking, he added: "The limit temperature of each metal is different, you have to explore it yourself."

"You heat up the stove now, and I will let you take out the Yanyang Iron when it reaches the appropriate temperature."

The Electrolux did so, turning the stove to high.

The raging fire engulfed five pieces of Yanyang Iron.

……

More than an hour later, Xuan Ziwen said to Electrolux: "Electrolux, now you take out the parts except the gun body one by one and put them in the water."

"Shhhhhhh...", a lot of white smoke came out of the barrel.

"Electrolux, take the muzzle out of the water." Xuan Ziwen's voice revealed a trace of eagerness.

Electrolux took out the muzzle from the barrel, and found that the original dark gold color of the metal had become somewhat different.

(End of this chapter)