When NC apprentices have a task system

Chapter 14 Master and apprentice compete on the same stage, XCMG, you are slow!

At this moment, Li Zheng's face was uncertain, his fingers were trembling, his eyes were wide open, and he was whispering almost crazily.

"This...Xu Yang, you...?"

"impossible?"

"Impossible?"

Xu Yang glanced at Li Zheng coldly, seeing his dumbfounded look, his heart suddenly blossomed with joy.

Li Zheng!Li Zheng!

Does this slap in the face hurt?

At this moment, the sound of the system sounded.

"Ding! The task of NPC engineer Li Zheng is completed: money +200! Experience +200! Collective NPC favorability +5! Li Zheng's favorability -20! Get the skill of stealing Li Zheng once, and it cannot be higher than your own skill level by two levels!"

"Ding! Xu Hui's favorability has been capped, the system has promoted Xu Hui to a special NPC, and the task reward is doubled!"

Xu Yang had already known about everyone's melon-eating expressions. Perfect special effects were no joke, so he could only silently accept this wave of favorability.

It's a pity that Li Zheng's number is actually negative, and this beam is considered to be a knot, a bad relationship!

But Li Zheng's stealing skills...haha!
Also, Xu Hui's favorability has been capped, and the quest upgrade is unexpected. It's double, this time it's a big profit.

"Humph!"

The instigator, Li Zheng, had a dark face at the moment, and felt a burning pain on his face. He secretly thought that he was ugly this time, so he snorted coldly and rushed into the office. Something happened, but also scattered.

After the episode, everyone performed their duties again, while Xu Yang scraped the edges and waited for Xu Hui's instructions.

Half an hour later, the reworked test stand was pulled back.

"Xiao Xu, do you still remember the process of repairing the test rack?"

Xu Hui pointed to the two test racks on the table and said.

"I have a little impression." Xu Yang said lightly.

In fact, when he was doing the mission just now, he got a copy of Xu Hui's experience in repairing the test frame. Coupled with his drilling and tapping special effects, there should be no big problem.

But it's better to keep a low profile...

Seeing this, Xu Yang hastily absorbed Xu Hui's test frame repair experience.

absorb!

Sublimation for your own use!

“叮！消化吸收徐辉的测试架修复心得，获得测试架修复经验＋1000！当前您的测试架修复等级： 1000/1000，系统已为您自动晋升为 0/5000（中级）。”

Is it intermediate?
But it should be enough, right?

Xu Yang was a little worried.

"Oh, how about this! You have one, I have one, I'll watch you a little bit."

Xu Hui frowned when he heard this, he intended to train Xu Yang, and said after pondering for a moment.

"Ding! Trigger the task of special NPC Xu Hui: master and apprentice compete together, repair a test rack, and surpass master Xu Hui. Task reward: Money +400! Experience +400! Obtain Xu Hui's stolen skills once, which cannot be higher than his own skills. Level two.”

"Ding! Do you accept? Yes? No?"

Compete on the same stage?

Xu Yang was taken aback when he heard the words, a little tangled.

What Xu Yang was thinking at the moment was, should he take care of Xu Gong's face and slow down?However, Xu Hui's purpose as a technician is just one sentence: high standards and strict requirements.

To put water or not, this is a question?
"Yes!" Xu Yang accepted the task.

"Oh, thank you Xugong."

Fortunately, Xu Hui doesn't know how to read minds, otherwise if he knows Xu Yang's inner thoughts at the moment, he won't be able to clean up the door.

The CNC business actually does two things: manufacture and repair.

Generally, large factories have a clear division of labor: CNC machining department and maintenance department.

Xinsheng, where Xu Yang is located, is just a small factory, so it naturally has multiple talents and integrates processing and maintenance.

There are two methods for repairing fixtures:

For the repair of metal products, the welding repair method is generally used directly, that is, the place to be repaired is welded by electric welding or fluoride welding, and then reprocessed by grinding with a grinder. Of course, attention must also be paid to the accuracy requirements.

Bakelite fixtures, except for the screw holes, cannot be repaired and can only be scrapped.

For example, the two sets of test racks returned by Qianshidala are relatively simple. It is just a problem of screw slippage. It only needs to be removed and the screw holes are filled, and then re-drilled, tapped, and screwed.

Bakelite is a resin board, and the same magic tool is needed to repair such screw holes-AB glue!
AB glue is actually another name for two-liquid mixed hardening glue. Liquid A is the original glue, and liquid B is the hardener. The mixture of the two can be hardened at room temperature.

Next, Xu Yang and Xu Hui sat opposite each other and began to dismantle the test rack.

"Xiao Xu, try to avoid secondary damage to the screw holes when disassembling."

As soon as Xu Hui picked up the electric drill, he couldn't help reminding Xu Yang.

It was only when he saw Xu Yang's movements that he realized that he was talking too much, because Xu Yang's movements were fast and ruthless, not at all jerky and slow like an apprentice.

The most important thing is, Xu Yang actually knows how to deal with slippery screw caps?

That's right, this is what Xu Yang learned from Xu Hui's test frame repair experience. Once the screw cap slips, the only way is to re-drill the screw cap with a small drill, tap the teeth, and then fix it with glue. The screw can be unscrewed.

Immediately, Xu Hui's eyes lit up. As a master mechanic, seeing his apprentice's superb skills, the dry river bed of fighting spirit in his heart bubbled up at this moment.

That's right, Xu Hui suddenly had the idea of ​​competing with apprentices on the same stage, once this idea came up, it was out of control.

"what!"

XCMG is this?

Xu Yang, who was dismantling the test frame, suddenly felt a strong sense of competition. When he looked up, his face changed slightly. It turned out that Xu Hui's disassembly speed was accelerated.

I'm dizzy!

Lao Xu, didn't you agree to take care of me?

You're better off... suddenly accelerating, where is your role model?
Of course, Xu Yang still acted in a calm manner. With a well-thought-out plan, he actually just waited for Xu Hui's full firepower, otherwise he would be embarrassed to abuse him?
Thinking of this, Xu Yang deliberately said:
"Xugong, your speed is so fast!"

"Uh... it's just a level of skill!"

Xu Hui blushed when he heard this, and hurriedly explained.

There are no fathers and sons in casinos, and there are no masters and apprentices in the same stage as technicians.

The two looked at each other, and then turned on the full-on mode.

"Xu Yang, you... pay attention to the quality!"

"Xugong, you are slow!"

"Xu Yang...you just mended it?"

"Xugong, you are slow!"

"Xu Yang... Your hole is also drilled?"

"Xugong, you are slow!"

"Xu Yang... are you attacking so fast?"

"Xugong, you are slow!"

……

"Ok!"

After 20 minutes, Xu Yang put down the electric drill, looked at the assembled test frame in front of him, and glanced at Xu Hui who was still screwing the screws, and couldn't help but let out a long breath.

"Ding! The task of the special NPC Xu Hui is completed: Money +400! Experience +400! Get the skill of stealing Xu Hui once, and it cannot be higher than your own skill level by two levels."

After a wave of operations, Xu Yang beautifully earned 400 oceans, 400 experience points, and a chance to steal skills.

Next, Xu Yang stole Lao Liu's wire cutting experience, Li Zheng's programming skills, and Xu Hui's programming skills.

　Rejuvenating the country through industry, CNC technology!
　　
　
(End of this chapter)