Technology overlord starts from intelligent learning machine

Chapter 119 The first lithography machine goes offline
"Why are you here?" Zhu Jie looked up and realized that the person who came in was Yang Mei. He hurriedly greeted him. He saw that only Yang Mei came in. Zhu Jie also stretched his head to look outside the tent and found that there was no one outside. He turned around and asked, "Child?"

"The child is brought by his grandparents, and they didn't come over in Rongcheng," Yang Mei said.

"No... you're just out of confinement, why don't you take a good rest, what are you doing here?" Zhu Jie took Yangmei into the tent, pressed Yangmei on the chair, and asked.

"I know from Hu Tao that you are going to do a big project recently. Hu Tao is by your side to help you... and... she is also by your side to help you. I don't want to sit down together and reminisce about the past when we are old in the future. When I was there, I was not in the past." Yang Mei looked into Zhu Jie's eyes and said.

Zhu Jie reached out and brushed Yang Mei's messy hair, saying: "Your body is important, besides, the child can't do without you now."

"I exercise regularly, and my health is fine, and I'm recovering well. My milk is not enough, and my child has to drink milk powder to supplement it. Weaning should be fine." Yang Mei heard that Zhu Jie didn't want her to stay, so she stretched out her hand Looking at Zhu Jie's hand, she said, "Honey, I don't want to be without me by your side during these turbulent years."

Zhu Jie lightly shook Yang Mei's little hand, thought for a while and said, "In this way, the company doesn't have enough money, so you will be responsible for the loan, how about it?"

Yang Mei nodded. She is no stranger to taking out loans as a financial background, but this time, what Yang Mei didn't expect was that it was so easy to get a loan.This time, Hongmeng Holdings, which has never taken out loans, received [-] billion special loans from the four major state-owned banks.Every time, Yangmei filled out the form and stamped it, and the loan came out within two days. There was no need for Yangmei to make those tricks of treating guests and giving gifts, begging grandpa to tell grandma.

It can be said that among the three, Yangmei has the easiest job, commuting between cities, and even visiting her daughter in Rongcheng.

The work of Hu Tao and Li Yueming is relatively more arduous.

Walnut is mainly responsible for receiving reports from various parties, and arranging and guiding them to corresponding jobs.Hu Tao was originally engaged in personnel work, leading a group of little sisters, and set up a reception desk in Jincheng to receive people from all over the world who came to report all day long.

This time, it can be said that under the coordination of Cui Yongchang, the relevant departments mobilized a lot of manpower. To come to support, it can be said that the relevant departments will transfer whatever kind of people Zhu Jie wants. It is the kind that must be reported immediately after receiving the order without any conditions.

According to incomplete statistics, nearly 20 people have participated in the battle of the "five nanometer project".

In addition to accompanying Zhu Jie every day and taking charge of Zhu Jie's daily life, Li Yueming is also responsible for accompanying Zhu Jie, checking and summarizing the progress of various projects, and reporting to Zhu Jie every night so that Zhu Jie can adjust the construction progress at any time.

Half a month later, the machining workshop took shape and began to install equipment.

Zhu Jie had already prepared the installation drawings. People with experience in arranging automated production lines who had been transferred from the Alchemy Furnace Company, along with machining and repair technicians transferred from major nearby companies, were in a dust-free workshop the size of a football factory. Start to install various mechanical processing equipment, install robotic arms, install conveyor belts, and place robots.

Although Zhu Jie doesn't do much work himself, he basically stays at the installation site and adjusts in time when problems are found to prevent rework, which is not a waste of time.

One month later, the lithography machine production workshop took shape, and the people who installed the equipment went to start installing the equipment.

The machining workshop began to trial-produce the precise parts needed for lithography machines.

"There is no one below, can it work?" At this moment of starting up, how could Cui Yongchang, the commander, be missing. After the final inspection, there was no problem, and Cui Yongchang pressed the start button.

Standing in the control room in the air, Zhu Jie looked at the processing equipment that started to start one after another below, and said: "In the future, all the precision processing workshops in our country will be unmanned. People will be tired and emotional, and machines will not meeting."

As the machine rotates, a small rotor bearing shell appears. It is transported along the conveyor belt, meets the next part, and is assembled into new parts by the robot. Then it continues to be transported, and then continues to be assembled, and finally become an accessory.After the test showed no problems, the accessory was boxed and sent out to the machine shop.

Outside the machining workshop, there are robot porters who gently lift up the boxes with accessories, gently turn the rubber tracks, and send the boxes into the warehouse. They are neatly stacked according to the position planned by the control center in advance.

In the next step, after the lithography machine assembly workshop starts work, they will also be responsible for transporting these components to the lithography machine assembly workshop.The workshops will be connected by sealed and dust-free corridors to ensure that these accessories will not be damaged.

Zhu Jie's machining workshop only processes and produces precision core components, and other non-precision components such as casings have been arranged for related companies to start production at the same time.

One and a half months later, the equipment installation and debugging in the lithography machine production workshop was completed, and trial production of lithography machines began.At the same time, the graphene wafer production line began to be installed and debugged. It was not easy to achieve such a big momentum, and the country also supported it. People asked people to give money (mostly temporary loans, which had to be repaid) (loans, which had to be repaid). , Zhu Jie himself felt sorry for himself if he did not directly build the 5-nanometer production line.

Anyway, what you set up this time is the "five-nanometer project". After the 5-nanometer lithography machine has been produced, how can it be said that the production is successful without passing the verification, and the verification must come out with a 5-nanometer chip production line, right?By the way, it should be no problem to get out the packaging line and the processor production line, right?After the chip is produced, you always have to apply it in practice to know whether the chip is produced up to standard, whether it can be used or not, right?These should be the way to live within the scope of five nanometer engineering, right?

"Is this the 5nm lithography machine in our country?" Cui Yongchang, who was waiting in the warehouse of the lithography machine assembly production line, said excitedly as he watched the forklift robot fork out a large box.

The lithography machine has already been packaged in the clean room, and it cannot be opened at this time. It is very troublesome to clean up when the wind and sand enter.

From a distance, everyone took a group photo with the forest box containing the lithography machine as the background, even to celebrate the first-line lithography machine off the assembly line.There is a yellow warning line marked on the ground. No one can enter the yellow warning line, and the robot will not flatter. They will send you the lithography machine to let you take photos at close range. They will only send the lithography machine to you according to the requirements of the control center. When you go to the warehouse, you won't stop for a moment because of your high official. If you slow down a little, you won't even be able to take pictures.

Fortunately, from the time of production until the first lithography machine rolled off the assembly line and was transported into the warehouse, there are TV stations in the control workshop to record the whole process. These are prepared for future news reports. As for when will it be possible? According to the report, Zhu Jie didn't know.

(End of this chapter)