Technology overlord starts from intelligent learning machine

Chapter 95 Fully Automatic Production Line Startup
The Institute of Metal Materials under the Hongmeng Research Institute, after nearly two months of "rectification", the entire institute has taken on a new look.

All logistics support personnel are streamlined to the optimum, one radish and one hole, and absolutely no idlers will be raised.For example, the canteen was contracted to Fangcunshan Food and Beverage Service Management Limited Liability Company managed by Hongmeng Holdings Service Industry Business Department run by He Entropy.

As for the technicians, some of them may not be able to stand the endless learning of confidentiality regulations and rules and regulations every day, and some of them may have come here to mess around and have no real knowledge, so they voluntarily offered to resign.The positions they vacated were quickly filled by Sun Yongchang's personnel department.As the director, Yan Minshun certainly didn't know that these people were technicians selected by the relevant departments, and some of them still had military ranks. Of course, after arriving at the Institute of Metal Materials, these people were all new recruits .

Knowing that the Institute of Metal Materials had almost finished "sorting out", Zhu Jie sent Li Yueming back and handed a small lockbox to Yan Minshun himself.Before handing over the lockbox to Yan Minshun, Li Yueming gave the lockbox to Sun Yongchang for inspection to make sure that the lockbox had not been opened.

After Yan Minshun took the lockbox, under Li Yueming's signal, he opened the lockbox face to face.Inside the lockbox is a USB flash drive. After plugging it into the computer, Li Yueming said the number 7, Sun Yongchang said the number 2, and Yan Minshun knew the number 6. Then, the password of the only file in the USB flash drive is 726.

The three numbers were told by Zhu Jie to three people respectively. Whether the three met or not, they had no idea what number the other party would be.

The file is encrypted with the white tiger packer, and the only way to see the content is to have the correct password.If the U disk is accidentally lost, what decoder do you want to use for decoding, and the password is wrong three times, the file will be self-destructed immediately.

This can be set when packing.

When setting a dynamic password, you can also set the file to self-destruct when the same password is repeated.The White Tiger packer even comes with a program bomb. If set, the file will not only self-destruct, but also "blow up" the computer used by the decryptor.

Opening the file, Yan Minshun saw the formulas and processing techniques of the three alloy materials.After Yan Minshun read the contents of the document, he raised his head and looked at Li Yueming suspiciously.

"The boss ordered that the test be carried out in strict accordance with the formula and process in the document. After the test is completed, the results will be tested. After the test report comes out, you can contact me and I will report it to the boss. Then the boss will come to see the result in person." Li Yueming said.

"Where... where did these three formulas come from?" Yan Minshun asked casually.

"All researchers in the Hongmeng Research Institute must have a belief that they should not question the boss. Even if the boss is wrong, they must find out the boss's mistakes in the process of completing the boss's orders, instead of relying solely on their own. The so-called education, qualifications, age, experience, etc. to question the boss, understand?" Li Yueming stared into Yan Minshun's eyes and said in a deep voice.

"Understood!" It seems that the training for the past two months has been effective, and Yan Minshun immediately replied loudly: "I promise to complete the task."

History has proved that in terms of technology, Zhu Jie has not made any mistakes, which has also caused a group of people to blindly worship Zhu Jie.Of course, a large part of this group of people are people who have stayed with Zhu Jie for more than ten days, and then these people will use their words and deeds to influence a group of people around them.

These are all thanks to Qiuqiu, but everyone, including Zhu Jie, didn't notice anything unusual.Zhu Jie thinks that people who trust in themselves and listen to their own words are useful.And everyone will think that the boss is the legendary genius, and you must be right to listen to him.

Unconsciously, in Hongmeng Holding Company, Zhu Jie's authority is slowly forming.

3 month 12 day.

In the central control room of the No. [-] workshop of the Alchemy Furnace Machinery Manufacturing Co., Ltd.

Zhu Jie said to Zhao Weiwei who was standing behind him, "Are all the raw materials in place?"

"I've checked it twice and everything is in place." Zhao Weisheng whispered: "Three sets of raw materials have been placed in the feeding room."

Zhu Jie clicked yes, indicating that Anwen stepped forward, and he would hand over the start-up of the first fully automatic and intelligent production line to Anwen.After a period of investigation and testing, Zhu Jie found that Anwen really planned to stay and learn from him, and he had absolutely no second thoughts about him.

Of course Zhu Jie didn't know, it was thanks to Qiuqiu.

Anwen stepped forward and pressed the main start button on the console.

The lights on the console began to flicker, and as the lights flickered, through the transparent floor-to-ceiling glass in front of the console, you could see the mechanical arm in the workshop below, and the robot shook a few times randomly.That's the entire production line doing a self-test.

The console is in the mid-air at one end of the workshop. Here, you may see that the production line in the entire workshop is arranged in an "M" shape connected with an "S" open shape. The material is fed from one end of the M, and when it reaches the other end of the S, What appears is the finished product.Since there is no need for personnel to enter the processing site, the entire workshop is very compactly arranged, and there is no need to consider the safety of personnel to leave safe passages, safe distances, etc., so the entire work of assembling industrial robots is completed in one workshop.

Yes, assembly, all the accessories have been placed on the conveyor belt of the material inlet by the staff according to the specifications.

It is also possible to realize fully automated production for processing this part, but it needs to be done step by step, first improving the precision, and then gradually transforming all the production and processing equipment.

What Zhu Jie needs most now is to increase the speed, because the 5nm lithography machine has only two years for himself.

With the end of the self-test procedure, the green indicator light of self-test completed and no problems found is lit on the console.After seeing that the indicator light was on, Anwen chose a robot on the computer on the console, and then entered a number "3", which means that to process this robot, a total of 3 robots need to be processed.

As the conveyor belt at the material inlet rotates, the spare parts are sent to the first pass "testing room", where all spare parts will be tested once to see if they are the parts required by this robot, and to see if the parts have reached the standard. The precision needed to organize this robot, etc.

Here, Zhu Jie deliberately arranged for people to put in two unused bolts and two unqualified accessories on the robot. After the inspection was over, these accessories were all recognized and grabbed by the robotic arm. After coming out, it was gently placed on another conveyor belt and sent out of the testing room.

Maybe these parts are just misplaced, or maybe they can be used elsewhere?The robotic arm did not perform destructive actions such as heavy grabbing or hitting.

After the inspection, qualified spare parts are placed on different conveyor belts by the robotic arm and sent to different locations in the workshop.The robotic arm in the machining workshop began to assemble the robot according to the program and processing specifications.The assembly of large parts is done by a robotic arm.Coordinated work and assembly of small parts are done by robots.

An industrial robot is actually an industrial machine with a crawler-type walking mechanism, which can move within a small range, and has two or more flexible mechanical arms, or it is just a mechanical arm with a moving device. Not at all personal.

All robotic arms start to work in an orderly manner under the command of the central processor on the console

With the passage of time, a robot slowly took shape, and when it arrived at the export port, a brand new industrial robot came out in front of everyone.

Now, only need to input the corresponding program, this industrial robot may carry out the corresponding work.

(End of this chapter)