Douluo Spirit Forging Master

Chapter 24-Forging Alone

After eating, Wan Xuan packed up the lunch boxes and put them at the door. After all, the people who served Wan Xuan could not enter the room. In that case, they would be able to see Aya.

Then Wan Xuan returned to the forging room. As soon as Wan Xuan opened the door, Gao Gao raised his head, looked at Wan Xuan and shook his head with a smile, and then pointed to the Iron Body in the corner without saying anything. .

Wan Xuan understood the meaning of the height of the building in an instant. This was to allow himself to select materials and then forge, and the height of the building didn’t care about him.

Wan Xuan nodded, and then came to the corner to choose Iron Body. This time Wan Xuan picked six Iron Body at once, but Wan Xuan didn’t plan to forge it only once anyway.

Randomly picked up a piece of Iron Body and threw it into the forging furnace and started to burn. Next, Wan Xuan re-forged the part that was forged by the height of the previous building. This time, Wan Xuan’s forging speed has increased a lot. After all, Wan Xuan carefully forged it last time. Let Wan Xuan know what kind of effect each hammer drop will produce, so there is no need to watch the changes that occur after the hammer is dropped so carefully, Wan Xuan’s movements have become much smoother because of this.

Wan Xuan took a deep breath, then held the iron tongs and threw the built parts into the quenching pool. A burst of steam rose up, and the cast iron parts lay quietly at the bottom of the quenching pool. This time the parts were better than The parts forged in the previous few times look good, but there are still potholes.

“Why is there still a problem? Where is the problem?” Wan Xuan looked embarrassed and clamped the parts at the bottom of the quenching pool with iron tongs, and wiped the quenching liquid on the parts with a cloth on the side.

“Although it is better than last time, I still haven’t found any problems.” Wan Xuan looked at the parts full of potholes. Can’t help but start to doubt his talent.

“Bang…Bang…Bang.” Lou Gao didn’t draw a drawing, but raised his head while looking at Wan Xuan while tapping the table with his finger knuckles.

Wan Xuan’s eyes rolled, then closed his eyes and felt the frequency of the tower’s knocking on the table. Suddenly Wan Xuan opened his eyes, picked up an Iron Body and threw it into the forge.

Then I closed my eyes again and continued to listen to the sound of the high-rise knocking on the table. The intensity of the knock was even and there was almost no difference. Wan Xuan gradually indulged in the sound of the high-rise knocking on the table. It was really wonderful.

Suddenly the height of the building stopped, Wan Xuan also retreated from this state, opened his eyes, and saw the red Iron Body in the forge.

He quickly picked up the Iron Body with iron tongs and placed it on the anvil, raised his forging hammer underneath, and started forging.

This time Wan Xuan closed his eyes, he was using his hearing to feel what would happen to the Iron Body when he hit it with the hammer.

Then open your eyes to proofread.

In this way, it took Wan Xuan five hours to forge this Iron Body into the desired part shape.

“I feel that this time I should be able to succeed.” Wan Xuan nodded while looking at the red parts.

Then he took a deep breath and summoned the courage to throw the parts on the iron tongs into the quenching pool, quietly waiting for the steam to rise cleanly and the parts to cool down completely.

Wan Xuan saw through the transparent quenching liquid the parts in only a few pits and bumps inside, and couldn’t help but be shocked. He succeeded.

The purpose of knocking on the table from the height of the building is to remind Wan Xuan that the force of each hammer is uneven when forging, which leads to these potholes on the surface of the forged parts.

After that, Wan Xuan closed his eyes and listened to the sound to adjust the intensity of the forging, so that the iron body was evenly stressed, so that there would be no bumps.

But after all, Wan Xuan’s power is not yet fully Master forging hammer, so there are still some potholes inevitably appear in some places, but there are only a few places, and it is not obvious.

Lou Gao felt Wan Xuan’s gaze lifted his head and glanced at this part, and said: “Strength control is not a day or two. Practice slowly. Also, you can’t just hit this kind of part. This is another. A kind of drawing of a part, please look at it first, if you don’t know anything, you can find me.”

Then Lou Gao threw the drawing of another part in his hand to Wan Xuan and nodded.

“Thank you, teacher.” Wan Xuan took the drawing handed over by Lou Gao, and then sat on the ground to study the drawing. Lou Gao was very considerate to Wan Xuan, so he wrote down the forging method directly so that Wan Xuan could read it. Understand.

Then Wan Xuan quickly forged this part according to the forging method of the height of the building, and the potholes on the part were already pitiful, and Wan Xuan’s forging technology was already there.

“Okay, the technology is barely able to forge alone, so let’s first make all these parts according to the parts on the drawings. Only half of these drawings have forging methods, and the other half of the parts need to be forged. Fumble for yourself, give you three days, and give me the finished product.” Lou Gao left the study with other design drawings and left the study to Wan Xuan.

Looking at these drawings, Wan Xuan didn’t know what to do for a while.

However, Wan Xuan knew that time was pressing, so he first forged these parts with forging methods, and then slowly explored the rest without forging methods.

These parts are not smooth and flat, but with various curvatures and corners. According to the forging method of the building height, it is easy to create various corners and curvatures, but if this is for a new rookie like Wan Xuan to do it by himself If you do, even a lot of effort will be wasted.

However, Wan Xuan was not only a person who knew how to do it. Wan Xuan quickly found a solution. The key to solving the problem this time was in the drawings that had been marked with the forging method that had been given to Wan Xuan by the height of the building.

Wan Xuan can be sure that the forging methods of these parts that are not marked with forging methods can be found in the drawings of these already standard forging methods.

Wan Xuan first created the parts that had forging methods, and then sat on a high chair, began to ponder these drawings, and edited the corresponding effects on these drawings, and then reversed it based on the drawings that did not indicate the forging method. Forging method, Wan Xuan quickly pushed out all the drawings.

When Wan Xuan raised his head again. The sky was already dark, Wan Xuan rubbed his eyes, sorted out the drawings, then stood up and went to the corner, began to select the Iron Body, and prepared all the parts with luck.

In this way, Wan Xuan reopened the forging furnace and started to forge these materials, striving to forge all the parts this morning.