Dragon Wizard of the Heavens

Wizard Tower, Astrologer's Tower.

Alan's figure stood in front of the central crystal suspended in the center, and next to him were Biss, Selena, and Helen.

See clearly?

A complex structural diagram of the floating city is suspended in mid-air. This is the current planning drawing of the floating city: I need you to direct those dwarves and alien laborers to build according to the requirements above.

Can it be done?

The three nodded and said, No problem.

Allen smiled and said, Very well, let's get ready!

After assigning the tasks, the three people leaned slightly away, and then thousands of aliens and dwarves in the wizard tower began to get busy.

Atlantis, the central city.

A group of dwarves drew a line on the ground, and the aliens began to dig along the line. According to Allen's drawings, a large number of ravines need to be dug in the central city of Atlantis.

Some of these ravines are for laying energy pipelines, and some are for constructing structures.

A piece of obsidian was taken out of the warehouse, and then placed in the designated location according to the specified requirements. Although aliens have intelligence, they can't understand too complicated problems.

This work is in charge of Allen's maids. By commanding the dwarves and the opposite sex to work, a large amount of magic metal is also transported from the storage room, and after smelting, the floating city is reinforced.

Allen sat on the sofa and meditated. He was going to open another sub-mine. The development level of the Salt Island archipelago is not high. Except for the largest Salt Island, the other islands are rarely visited by people, and some remote islands live wildlings or pirates.

These islands are fairly rich in minerals. After choosing two islands that are fairly rich in minerals, Allen built a spell barrier to cover up the two islands, and then built a crude stronghold here.

Put those unmutated Gold-devouring beast cubs in there. The concentration of elements here is far lower than that of the wizard tower, which can guarantee that these gold-eating beasts will not change.

In addition to preparing to build the steel golem production line this time, Allen also plans to try to connect the wizard tower with the floating city.

The central city of Atlantis has been separated from the outer city. As long as the various energy pipelines are laid and the floating city is connected, it can try to lift off.

This is the main building of the Floating Void City. After the main building is completed, the Misuo and the artificial magic net will be gradually constructed.

The construction cycle of a floating city is likely to last for decades, or even hundreds of years. Allen is going to notify the five-ring tower to send people to help.

In such a big city, if you only rely on Allen, you will be exhausted. Not to mention other things, just the blessing of the hardening technique as a whole in the floating city is enough for you to keep busy.

Hardening is not a very difficult spell. Official wizards can learn it with a little effort. In addition to hardening, various runes need to be engraved on the floating city to ensure that the floating city can be used quickly under any conditions. adapt.

There is no mythical lock in the current wizard tower. Allen has a set of mythical locks left by ancient wizards. This time has been thoroughly researched. Empty cities require strategic weapon deterrence.

Therefore, the mythos in the floating city are basically legendary constructs that integrate attack and defense.

There are a lot of things that need to be done recently!

Allen rubbed his temples, suddenly feeling a little overwhelmed.

In addition to transforming the floating city, the steel golem production line needs to be completed as soon as possible. Only by continuously producing steel golems can we launch a counterattack against the abyss and drive the abyss demons back to their hometown.

Compared with the stone golem production line, the steel golem production line is much more complicated, but the steel golem production line no longer needs the carving process, but the casting process is replaced.

The iron golem needs to add a large furnace to melt various metals in a specific ratio, and the molten metal liquid will be poured into a specific mold.

There are several ways to produce steel golem parts, the simplest and most common is the casting method,

However, this method needs to make molds every time, and the parts after casting need to go through a lot of post-processing. The casting method is suitable for manufacturing complex parts.

In addition to the casting method, there is also plastic forming processing, such as forging, which uses hammering and extrusion to shape metal under cold working or high temperature conditions. Popular ways, such as blacksmithing.

Although this method is common and simple, unexpected results will appear in the hands of some masters, and this method is also the method with the most artifacts.

Rolling: The high temperature metal billet passes through a number of continuous cylindrical rollers, which bind the metal into the mold to obtain the preset shape. Compared with forging, rolling is obviously much more advanced, and mass industrial production started here. Including subsequent extrusion, stamping, etc.

Extrusion: An inexpensive process for continuous machining of solid or hollow metal shapes of the same cross-sectional shape, both hot and cold.

Impact Extrusion: A process for machining small to medium sized parts that do not require taper. The production is fast, and parts with various wall thicknesses can be processed, and the processing cost is low.

In addition to these, Allen has obtained a lot of more advanced technology, powder metallurgy, from the world of Predator.

Powder metallurgy: A process that can process ferrous metal components as well as non-ferrous metal components. It includes two basic processes of mixing alloy powder and pressing the mixture into the mold. The metal particles are sintered and shaped by high temperature heating. This process does not require machining, the utilization rate of raw materials can reach 97%, and different metal powders can be used to fill different parts of the mold.

Powder metallurgy also has a more lofty name 3D printer.

3D printers can make almost any metal part, and Allen plans to make a 3D printing device specifically for the complex equipment in the Iron Golem.

The scorching ray can be used to melt metal powder, adding the freezing ray for cooling.

I also need a computer with sufficient computing power. This is a bit troublesome, but you can use the tower spirit instead. This time, I got a legendary soul spar from the world of Diablo, which can be used as a raw material.

Well, an anti-gravity control device needs to be added. In other words, this 3D printing device is really complicated. Flipping through the information obtained from the Predator, Allen chose to use various spells instead.

After all, if the original is copied over, there will be a lot of materials that cannot be processed. After all, some magic materials seem very unscientific. A 3D printer made by magic technology, hehe! It's magical just thinking about it.