Escape The Solar System With Millennium Technology

Chapter 105 – Ordinary type and heavy-duty type

“Prince William, if there is nothing wrong, I will go back to work first!” Wang Lei said.

“Mr. Wang, go ahead!”

So after bidding farewell to Prince William, Wang Lei returned to his laboratory and began to design individual exoskeleton.

Because the individual exoskeleton was designed for the Chinese Academy of Sciences before, although it was copied from the drawings given by Nuo Wanting, Wang Lei has fully understood the design and internal structure of the individual exoskeleton during the drawing and assembly process.

So this time Wang Lei intends to design two individual exoskeletons independently, namely the normal type and the heavy type.

Ordinary individual exoskeleton, the general structure is similar to W35 individual exoskeleton, but many things have been enhanced, and the power of the driving device has been increased a bit, so that it can also be compatible with the hidden exoskeleton during rapid movement The same flexible and smooth.

The exoskeleton’s limbs and torso are equipped with fixed clamping points. These clamping points are used to install bulletproof plates. The bulletproof material Wang Lei is divided into three grades: high, medium and low. The advanced bulletproof material is high-strength tungsten carbide alloy. It can withstand the frontal blow of 12.7mm heavy machine gun bullets.

The medium bulletproof material is an ordinary ceramic bulletproof board, which can only withstand the frontal shot of a 7.62mm rifle bullet. However, due to the nature of the material itself, it can only withstand up to 3 bullets at the same position. It is possible with multiple ceramic bulletproof boards. Will be broken down.

The lowest-grade bulletproof material is an ordinary composite bulletproof steel plate, which can only withstand some fragments of shells and some small-caliber ammunition, such as 9mm pistol ammunition.

The price of these bulletproof materials is also different. Of course, the most expensive is the high-strength tungsten carbide alloy. The price is of course very touching. It costs US$800,000 for full body coverage. In Wang Lei’s view, this is just taking money to block bullets.

And the price of ceramic bulletproof board is much cheaper, but it is not too cheap to go there. If the whole body is covered, it will cost 500,000 US dollars.

The cheapest composite bulletproof steel plate costs $100,000.

Because of his experience in making foreign limbs, Wang Lei designed a pair of mechanical exoskeleton gloves. Of course, this is also an optional item, which can be optional or not.

The driving device of this exoskeleton glove, like the graphene wire of the foreign limb, is driven by the graphene wire pulled by the geared motor, but this time the geared motor is not like the foreign limb, which has a terrifying 52 times deceleration. Wang Lei only designed a 38-fold deceleration. Although the output has become much smaller, this does not affect its use. After all, hand-squeezed steel pipes can only be used in some special situations and close combat.

Under normal circumstances, the gun is used to solve the enemy at a long distance, and there is no situation of standing close to the body at all.(Read more @ wuxiax.com)

The battery is also modified as well. In the case of increasing the output of the driving device and the bulletproof material, it is obviously not enough if the original battery is used.

Therefore, Wang Lei increased the battery capacity from the previous one to 1.5.

Taking into account the shooting level of the Saudi soldiers and their extremely cheating combat ability, in order to prevent them from smashing their own signs, Wang Lei asked for an auxiliary aiming system from Nuo Wanting.

The auxiliary sighting system has only two components, one is a laser sensor installed above the muzzle, which is mainly used to determine the position and angle of the muzzle, and then send the data back to the control center.

The control terminal is a tactical helmet, which is connected to laser sensors and individual exoskeleton.

The helmet will display an aiming position and a muzzle position on the AR screen of the helmet according to the wind speed, humidity, atmospheric pressure, the position and angle of the muzzle, and the distance to the target.

As long as the muzzle position and the aiming position are combined together, you can hit the target, just like playing a VR game, very simple.

Of course, the price of this set of equipment is also quite expensive, requiring a set of 5 million US dollars.

Although it is very expensive, in Wang Lei’s view, it is worth it. With this auxiliary sighting system, plus the top version of the individual exoskeleton, you are the Rambo on the battlefield, without heavy weapons. Next, you are the god on the battlefield.

As for the reinstalled exoskeleton, Wang Lei asked Nuo Wanting for a design drawing of the reinstalled exoskeleton because he had never designed a reinstalled exoskeleton. After careful study, Wang Lei began to design Own heavy-duty exoskeleton.

The first thing to be clear is the tactical positioning of the heavy exoskeleton.

Wang Lei’s positioning for it is ADC and meat shield.

The heavy-duty exoskeleton is 3.8 meters high, and the whole body is covered by a high-strength tungsten carbide alloy up to 1.4 cm thick. It can withstand the attack of .50 caliber anti-material sniper rifles. Breakdown.

This is also no way. If you want to increase your defense, the best way is to develop new materials. But Wang Lei feels that it’s not the time yet. At the very least, he has to wait for the use of high tungsten carbide alloys to be exhausted. .

In order to move the heavy-duty exoskeleton comparable to human tanks, Wang Lei uses a combination of high-power electro-hydraulic rods and high-power servo motors.

But even so, the speed and flexibility of the reloaded exoskeleton is still a bit worse than that of the ordinary individual exoskeleton.

However, this does not hinder the use of reloaded exoskeleton, because the main job of reloaded exoskeleton is to stand at the forefront of the team and output frantically against the enemy’s vitality.

In order to achieve continuous firepower output, Wang Lei chose two weapons for the reloaded exoskeleton. They were a 12.7mm three-barrel rotary machine gun on the right hand and a retractable 30mm stray bullet on the left hand. gun.

The 12.7mm three-barreled rotary machine gun on the right hand can adjust the rate of fire, up to 1300 rounds per minute, but Wang Lei does not recommend to adjust the rate of fire to the highest, because the total number of rounds shot is only 1500. If it is adjusted to the highest, it will take more than a minute. It will be over.

The stray bullet gun on the left hand can be loaded with ordinary explosive stray bullets or shelled armor-piercing bullets, but due to the size limitation, the effective range of the shelled armor-piercing bullets is only 300 meters, while the range of ordinary stray bullets is 1000 meters.

Because of its size and weight, each heavy-duty exoskeleton can only carry 50 rounds of ammunition.

Therefore, Wang Lei suggested that all 50 rounds be equipped with ordinary stray bombs. As for what to do if you encounter tanks and armored vehicles, Wang Lei’s suggestion is to let the rocket launcher solve it.

The heavy exoskeleton can only deal with lightly armored targets such as armored vehicles. To deal with heavy armored targets such as tanks, the heavy exoskeletons must be equipped with anti-tank missiles or electromagnetic guns.

But these two methods are not realistic.