From University Lecturer to Chief Academician

Soon, two days passed.

In the afternoon, in the large assembly room of the airship research and development base, a large group of workers were busy cleaning up the wooden boards and other facilities that had been built.

The second-floor platform of the assembly room has been demolished, leaving the inside looking very empty.

Teacher Zhou and Xu Hongwei stood in front of the door together.

Looking at the large flying saucer in the center and the surrounding space, Teacher Zhou turned his head and asked Xu Hongwei, "The second floor has also been demolished. Is this necessary?"

"It has to be dismantled to be safe."

Xu Hongwei explained, "It has been stated in the technical data that the propped up superimposed force field covers about five meters, but the impact may reach six or seven meters."

"I've discussed it with other people, and they all agree that there should be at least ten meters of space."

Teacher Zhou listened and nodded.

While the two were talking, the demolition work had entered the final stage, and some workers came out carrying scattered equipment and components.

"about there."

Xu Hongwei walked in after saying a word, greeted others and said, "Do another test, and then prepare for the test!"

The detection is aimed at newly installed magnetic field generating equipment.

The airship-2 aircraft placed in the center does not need to be tested, because the internal circuit of the aircraft is always on, and several electric fans are always running.

This is also part of the test.

They need to ensure that the newly installed magnetic field generating device will not affect the normal operation of the aircraft's internal circuits.

After all the tests were completed, Xu Hongwei ordered the official test, and many non-operators went to the door of the assembly room, where they waited together.

Everyone is very excited and looking forward to it.

The current test is to let Airship-2 open the invisible shield, which can be understood as a strong annihilation force field to a certain extent.

They all know the form of the strong annihilation force field, but they have only seen it in reports. They never expected to see it in the experimental base, and it has become a brand new stealth technology.

Many people couldn't help discussing, "Will it form a black ball that absorbs light like the report said?"

"Probably not?"

"According to the information, the intensity is only more than 3 points, and it will only be a little dark..."

"If you don't look, you don't know."

During their discussion, the anti-gravity system of Airship-2 was turned on, but the superconducting motor was not turned on, and no upward thrust was formed, and the aircraft remained in place.

After Xu Hongwei confirmed that the anti-gravity system was turned on, he ordered the operator to turn on the magnetic field generating device.

The eighteen magnetic field generating devices were turned on three times, the ten devices at the bottom were first activated, and the six devices at the top were activated later.

The remaining two devices above were turned on last.

The purpose of doing this is to ensure safety and prevent the sudden excitation of a strong annihilation force field from affecting the surrounding magnetic field and electricity, thereby affecting the operation of the aircraft.

"Prepare!"

"The last step, number 7, number 8..."

"3, 2, 1—"

"start up!"

Accompanied by Xu Hongwei's shout, all eighteen magnetic field generators were turned on.

The next moment, the edge space of Airship-2 became blurred, and further inside was a layer of gray film, which made the eyes feel uncomfortable if you looked carefully.

The hull of Airship-2 was covered by gray film.

Everyone who saw this scene held their breath, even Mr. Zhou, who had seen it once, felt different from experiment and application.

When watching the experiment in the anti-gravity center, it feels that it is just an experiment, everything is manufactured, and it doesn't matter whether the device inside the field can be seen or not.

Now inside the gray film is the Airship-2 aircraft. The aircraft is completely covered, and there is nothing to see outside, which makes people feel very shocked.

"This is the invisible shield?"

"It's really invisible. I just took a few glances and didn't want to look at it again... It's uncomfortable..."

"Don't look too much, the shield absorbs light."

"Yeah, it's like sucking your eyes in!"

"That's really amazing..."

After satisfying their curiosity, a group of technicians returned to their respective jobs. They were just conducting tests on making the invisibility shield, and there was still work to be done.

There are technicians to control the radar for detection.

It turned out that whether it was long-wave radar, short-wave radar, or infrared radar, there was no feedback of any data, as if there was nothing there.

The principle of radio wave radar is that the emitted radio waves will return when they hit an object, and then be detected by the receiver. According to the reflected radio waves, the position, distance, and size of the colliding object can be located.

Now that no feedback signal is detected, the radar naturally assumes there is nothing.

Many people were shocked.

This is an absurd thing when you think about it. You can see a huge object with your eyes, but the radar can't detect anything. It's like standing in front of a person. You can see it clearly with your eyes. I picked up my phone to take a picture, but nothing was captured.

Many people couldn't help but sigh, "It's really an invisible shield!"

"It can be seen clearly, but nothing can be detected, that is, it cannot be locked by radar equipment. In this way, even flying at low altitude is safe?"

"The enemy can't use their eyes to locate and launch missiles, can they?"

"I can now imagine how terrified the enemy will be when the Airship-2 turns on the invisible shield and appears. They may think that aliens are coming..."

"Or, think what you see is a hallucination?"

"Do you think everyone else is a fool? You can know something by comparing the light."

"Anyway... very powerful!"

"I feel that this shield is really invincible. Originally, Airship-2 flew high and was not easy to be locked. Now it can't be locked at all!"

...

Superconducting Materials Research Center.

Wang Hao continued to discuss the technical issues of manufacturing micron-sized granular materials with a group of scholars in various fields.

The way they discussed is that each person expounds their views on micron-scale materials technology in their own field, and analyzes the impact of semi-topological structures on the macro.

This research is clearly biased towards theory.

Wang Hao found scholars in various fields to study together, the purpose is to demonstrate from a theoretical point of view, so as to accumulate enough foundation.

At the same time, he also arranged experiments.

The Institute of Aeronautical Materials is responsible for the experiment, mainly because the Institute of Aeronautical Materials has sufficient equipment, environment and talents.

Wang Hao asked the Institute of Aeronautical Materials to help with the experiment, and naturally the research has been finalized. The name of the project is 'Metal Particle Material Technology'.

For the Institute of Aeronautical Materials, Qu Gui and Cao Dongming participated in the research.

Both Qu Gui and Cao Dongming are scholars in the field of alloys, and their research directions are metal composite materials and titanium alloys respectively.

This experiment in cooperation with the Institute of Aeronautical Materials is to study the performance of liquid metal materials in special environments.

Wang Hao went to Cao Dongming first.

Cao Dongming has been studying titanium alloys for a long time, and asked him to do research on observing liquid metals in special environments, and the content is also very relevant.

Cao Dongming recommended Qu Gui again.

The two designed experiments together to conduct research. The content of the experiments was related to liquid metals and required special environments such as high temperature, high voltage (voltage), and strong magnetism.

Experimental design is not easy.

Their research still started with a conductor containing first-order lithium. The melting point of the first-order lithium conductor is relatively low, and it is enough to create an environment of several hundred degrees Celsius.

After that, the temperature was gradually increased, and a lot of materials were used, including several superconducting materials containing first-order iron, but because the materials had to be melted, it was impossible to create a superconducting low-temperature environment.

Their research went nowhere until a magnetized material of pure iron was used.

The pure iron magnetized material was directly provided by Annihilation Technology Company to the Institute of Aeronautical Materials. After continuous experiments failed to find out, they simply placed the pure iron magnetized material in a furnace to create a special high-voltage environment, but the manufacturing effect was very good. Difference.

The resistance value of a metal conductor is positively correlated with temperature.

To put it simply, the higher the temperature, the higher the resistance. A high-temperature furnace over 1500 degrees Celsius can almost block the flow of current, and no matter how high the voltage is applied, it is meaningless.

However, at the same time as the voltage is applied, the equipment is also used to create a magnetic field, which affects the pure iron material in the high-temperature furnace, which can be regarded as creating a special environment.

This experiment was just to give it a try, but it turned out to be an unexpected discovery.

Cao Dongming found Wang Hao immediately, and said excitedly, "We found that the first-order iron was separated from the conventional iron when it was stirred."

"In the beginning, we didn't notice that until the liquid metal was re-cooled and solidified, we found through inspection that a lot of first-order iron was concentrated at the bottom of the material."

"So, we think that during the process of stirring, the first-order iron element sinks..."

"..."

Wang Hao thought about it carefully, and immediately realized the problem.

The sinking of the first-order iron elements is likely to be related to the specificity of the first-order elements or the influence of the semi-topological structure of the conductor under high voltage.

"Perhaps, both."

He thought about it and said to Cao Dongming, "I don't know if your discovery is related to the research, but congratulations..."

"You may have discovered a whole new method of purification."

"Just creating a high temperature and strong magnetic environment can separate the first-order iron, which is much simpler than other methods!"

Conventional first-order iron separation uses physical methods.

The physical method is to create a high-temperature environment to melt the magnetized iron material, because the melting point of the first-order iron is higher than that of conventional iron, and this feature can be used to 'screen' out the unmelted first-order iron.

This method sounds simple, but in fact, it is very complicated.

First of all, the first-order iron elements inside the magnetized iron material are evenly distributed, even after high-temperature melting, the distribution is still uniform, and it is impossible to form a "blocky" structure at all.

In addition, it is very difficult to "screen" the melted first-order iron in an environment above 1500 degrees Celsius.

Therefore, many processes are required.

Now it is just to create a high-temperature, strong magnetic environment, and at most a 'high voltage' can be used to make some iron sink and separate through stirring. The difficulty is naturally reduced a lot.

The lower the difficulty, the lower the cost.

Cao Dongming was also very excited when he heard this. No matter whether their discovery is helpful for research or not, it can be used for the extraction of first-order iron, and the results are quite large.

Wang Hao is also very interested in new discoveries.

He decided to take the time to visit the Institute of Aeronautical Materials, and maybe he could see some unexpected things from the experiment process.

At that time, research will progress.

...

Now Wang Hao can't go there. After talking with Cao Dongming, he explained the work of the Material Research Center, and then took a car to the Annihilation Force Field Experimental Base.

This time I went to receive the visiting team.

Those who came to visit the experimental base were the team of Annihilation Technology Company. The general manager Zhong Minge led the team in person. Others included Professor Wang Jinlu, the core of the technology department, and other cutting-edge people in the technical field.

They applied several times before they decided to visit the Annihilation Force Field Experimental Base.

Annihilation Technology Company is not an ordinary company, and the technical department is not easy to enter. Everyone who enters the technical department is a scholar from the military and aviation group's affiliated institutions, and most of them are from confidential institutions.

Wang Jinlu is one of the best.

Strictly speaking, he is an engineer, and he was elected as an academician of the Chinese Academy of Engineering three years ago.

The team from Annihilation Technology Company came to visit the Annihilation Force Field Experiment Group, which is also inseparable from Wang Jinlu's strong request. They must have a deep understanding of the strong annihilation force field when they are doing manufacturing technology research and development. However, the company's manufacturing equipment is fixed, and it is impossible to used in research and development.

Their past work has yielded nothing at all.

The strong annihilation force field generation equipment cannot be changed, only the equipment that transports materials above can be changed, but because they do not have sufficient understanding of the strong annihilation force field generation technology, they are only trying to improve the manufacturing process, so that until now, Annihilation Technology Company Automated rapid production is still not realized.

When he arrived at the experimental base, Wang Jinlu immediately went to see the annihilation force field generating equipment.

Experimental equipment is different from manufacturing equipment.

All the complex structures of the experimental equipment for the annihilation force field are right in front of your eyes, and you can see them very clearly. Unfortunately, the experimental equipment is surrounded by spiral magnetic field equipment, so you can't see anything at all.

Wang Jinlu had no choice but to find Wang Hao and kept asking technical questions.

Their research and development direction is to simplify equipment, improve manufacturing-related technologies, design manufacturing processes, and achieve more efficient manufacturing of magnetized materials.

Annihilation Technology Corporation has not been established for a long time.

Naturally, there are no precedents in the field of manufacturing in the new technology direction, and all related technologies must be accumulated slowly.

Now the problem of Annihilation Technology Company is that the material manufacturing pressure is high, but the efficiency is relatively low. They have three strong annihilation force field generators, and the field strength is around 7.8 times. Each device can only be turned on two to three times at a time. After hours, inspection and maintenance will be carried out after shutdown.

Inspection and maintenance of equipment is a problem, and manufacturing efficiency is also a problem.

The magnetization of the lithium element compound is just going through the field force once. The same is true for the magnetized iron material. Put the material in a strong annihilation force field and then take it out to complete the magnetization. A few seconds is enough time.

However, the strong annihilation force field interferes with electricity, equipment, and instruments, and cannot allow transportation equipment to pass through the strong annihilation field. They have not yet designed a device for transporting materials that can be used, and have not realized an efficient manufacturing process.

This also directly affects manufacturing efficiency.

Annihilation Technology Co., Ltd. has two products, one is magnetized iron material, and the other is magnetized lithium element compound. The latter is relatively better, and it can be transported in large quantities after a field force.

The former brings a lot of pressure.

At present, the magnetized iron materials are mostly used by scientific research institutions, because iron itself is the most widely used metal, and there are many research and development directions.

Institutions such as the Institute of Iron and Steel and the Institute of Aeronautical Materials use magnetized iron materials in large quantities. Many studies simply do not extract first-order iron, and directly use magnetized materials for experiments. The demand for magnetized iron materials is naturally very large. .

The production speed of Annihilation Technology Company can't supply at all, but they still have to spend part of the external sales to ensure the company's high profits.

this is a problem.

Furthermore, the extraction of first-order iron is even bigger than the above problem.

One of the important reasons for the high price of first-order iron materials is the high cost of extraction, and many scientific research institutions do not have the ability to extract magnetized iron materials.

Annihilation Technology Company has to rely on the next-level department to extract the first-order iron, and then supply some important domestic scientific research institutions.

"Our withdrawals are far behind the supply..."

Wang Jinlu shook his head and said, "Iron has a wide range of uses, but steel and alloys require a lot of materials."

"We came this time to learn about the most advanced technology and see if it can improve manufacturing efficiency."

Wang Hao said, "Your equipment is already very advanced. With a force field of 7.8 magnification, at least there will not be much difference in the manufacture of first-order iron."

While the two were talking, Zhong Minge strolled over.

He walked around the entire lab room, carefully inspected the experimental equipment, and said with some regret, "It's a pity, your new technology can't be used in manufacturing."

"I understand what you said last time, Academician Wang. This device really doesn't work!"

Wang Hao nodded slightly, and said, "There is really no way to manufacture magnetized iron materials, but for extraction...the Institute of Aeronautical Materials has developed a new technology. Maybe you should know about it. It may increase the extraction efficiency."

"Yeah?"

Zhong Minge didn't care too much.

For Annihilation Technology Company, if the extraction efficiency of first-order iron is increased, it will hardly bring any benefits, because their extraction is aimed at domestic scientific research departments, and even if the extraction efficiency increases, it is still far behind the demand.

He sighed and said, "It would be great if we could directly produce high-purity first-order iron."

"That's impossible."

Wang Jinlu denied, "From the trend of the content data, even with a strong annihilation force field of 20 times the rate, the first-order iron content of the magnetized iron material produced will not exceed 20%."

After he finished speaking, he looked at Wang Hao, as if hoping to be recognized.

Wang Hao was lost in thought. He froze for a long time, raised his head and asked Zhong Minge, "What did you just say?"

Zhong Minge smiled awkwardly, "I'm just talking casually..."

"That's what I said just now, what's impossible?" Wang Hao's expression was very serious.

"Making first-order iron?"

"anything else?"

"Directly produce high-purity first-order iron...?"

"Yes, this is it!"

Wang Hao waved his hand vigorously, and said in surprise, "Direct production! Direct production! Makes sense! Low content does not mean that it cannot be produced directly!"

"The magnetization of high-temperature liquid metals is also a good research direction."

"This may be related to the semi-topological structure, or it may be related to the peculiar phenomenon..."

He kept muttering, and immediately made a decision, "I'm going to the Institute of Aeronautical Materials! Manager Zhong and Professor Wang, I can't entertain you for the time being."

"Please help yourself!"

After Wang Hao finished speaking, he quickly left the experiment room.

Wang Jinlu said in admiration, "This is Academician Wang's attitude towards scientific research. He really deserves to be Academician Wang... If you have any ideas, you should immediately implement them..."

Zhong Minge froze in place.

He didn't sigh so much, but remembered the last time he went to Xihai University, he just said a few words, and then Wang Hao left.

This time, is it still like this?

He tapped the corner of his mouth with his fingers and muttered, "This mouth..."

"Next time, definitely don't talk!"