From University Lecturer to Chief Academician

The information released by Annihilation Technology Co., Ltd. caused international shock.

It turns out that the production of first-order iron is based on the unit of 'kilogram', because the content of first-order iron in the magnetized iron material is low, and there will be a more complicated extraction process in the follow-up. The output of first-order iron is naturally very low, so it can only be supplied to various used by scientific research institutions.

Now it skips the 'extraction' process and directly produces high-purity first-order iron, and the output is calculated in 'tons'.

The information released by Annihilation Technology Company is very clear. They confirmed that the daily production of high-purity first-order iron exceeds 100 tons, and they also stated that "the automation process has not been completed yet, and there is still a lot of room for improvement."

In other words, the output of first-order iron will only be higher in the future, and it can be expected to reach "thousand tons" or "tons".

This also means that first-order iron can be used on a large scale.

American was the most shaken.

Before they started a new round of confrontation with flower growers, they also led exercises to demonstrate their military power. They wanted to form a tentative deterrent. The fuse was that Annihilation Technology Company restricted the sale of first-order iron to the outside world. You can't do research if you don't have iron.

The public explanation of Annihilation Technology Company is that the equipment needs to be upgraded, but their analysis believes that it is aimed at American.

result……

Is it really an upgrade?

This is no longer just an upgrade, but the use of an unknown high-end technology, which greatly increases the production of first-order iron.

"It turned out to be a real upgrade? And it also uses brand-new technology."

"That kind of technology must be very high-end. We can confirm that the content of first-order iron in the magnetized iron material is only more than 2%. How did they manufacture a material with a purity of more than 90%?"

"What kind of technology is that!"

"In principle, a strong annihilation force field can only produce magnetized materials, and the first-order iron is evenly distributed. Even after melting, it is impossible to separate..."

"anyway……"

"Since the annihilation technology company has suspended the sale of first-order iron, it is because of a new technology to prepare for mass production. Why did we do that a while ago?"

"Deterrence is still necessary."

"But we seem to be the one to be deterred..."

"..."

When thinking of the new stealth technology of Airship-2, many people were silent at the same time. Their purpose was indeed to deter, but in the end, few people cared about the exercise.

Everyone is talking about Airship-2.

The exercise can only be carried out hastily and ended hastily, and there are not many spectators for the symbolic performance. It is really depressing to think about it.

The mass production of first-order iron is good news for many American institutions. They need first-order iron for research, and mass production means that the price will be greatly reduced. With the same amount of money, they can get Large quantities of material are studied.

Many people care about the result, not the process, especially for first-order iron.

Because only the Annihilation Technology Company can produce first-order iron, the most basic thing for other organizations to learn about new technologies is to create an annihilation force field of sufficient strength, otherwise there is no point in discussing it.

Many people refocused on Gamow-Shapley.

When Gamow-Shapley heard the news, he was so excited that he almost jumped up from the spot. He had already lost confidence in the Groom Lake plan, and he just insisted on assuming the position of project leader.

Now, there is hope again!

Annihilation Technology Company produces primary iron on a large scale, and will continue to sell it to the world normally. They can buy large quantities of primary iron at a low price, and various researches can continue.

soon.

Gamow-Shapley has another piece of good news.

That was a report from the European media. It was about the meeting between Wang Hao and Novotini. During their discussion of the annihilation force field technology, they also mentioned the Groom Lake project.

"Professor Wang Hao believes that the Groom Lake project is very valuable."

"He affirmed the research plan and once again confirmed the correctness of the annihilation force field technology developed by the upgraded material..."

A lot was said in the news reports, all of which were analyzed based on Wang Hao's one-sentence comment, which can be simply understood as 'Wang Hao affirmed the Groom Lake plan'.

That's good news for Gamow-Shapley.

Although Wang Hao's team and the Antigravity Behavior Research Center are the targets and competitors of the Groom Lake project, everyone must admit that Wang Hao is the most authoritative figure in annihilation force field technology, and scholars in any other related fields , are not qualified to be with him.

Wang Hao's affirmation gave Gamow-Shapley more support.

Gamow-Shapley also became more confident, "Just wait. As long as you buy large quantities of first-order iron, the research will go smoothly..."

"There will definitely be results!"

"It will definitely create a high-strength annihilation force field!"

Now Gamow-Shapley's idea is not to catch up with the Antigravity Behavior Research Center. He hopes that the purpose of the research is to prove to those who are not optimistic about the plan.

It's a shift in mindset.

In the past few months, Gamow-Shapley has experienced a "life low tide", and even many participants in the plan are beginning to be pessimistic about the research direction.

When he went to some meetings, he could also hear all kinds of cynicism.

Gamow-Shapley was annoyed by this.

At this moment, he was in a very happy mood, full of expectations for the next step of research, and even wanted to shout, "Thirty years in Hedong, thirty years in Hexi..."

"Just wait and see!"

...

The international community is more concerned about the impact of mass production of first-order iron, while many people in China are discussing whether new technologies can be used to mass-produce first-order lithium or first-order carbon.

"Since first-order iron can be produced in large quantities, it can be applied to produce first-order lithium or first-order carbon."

"It's quite possible."

"If first-order lithium or first-order carbon can also be produced in large quantities, the upgraded materials will be more widely used..."

That is of course impossible.

Iron has its own uniqueness. If it is replaced by first-order lithium or first-order carbon, the same technology may not necessarily produce the same phenomenon.

The problem with first-order lithium is that the element properties are too active, and the production of magnetized lithium materials can only use compounds instead of elemental lithium. Even related technologies can be used, and the production must be carried out in a vacuum, which is too complicated. up.

For first-order carbon, there are two questions, one is the activity of the element, and the other is the melting point.

There are a lot of simple carbon in nature, but if the carbon is heated to a certain level, it will definitely react with other elements.

For example, burn.

Even with the same technology, primary carbon is produced in a vacuum.

In addition, carbon has another disadvantage that hinders production. The melting point of elemental carbon is too high, so high that it is not easy to produce such a high temperature in normal production.

In short, the new technology can only be used to make first-order pure iron materials for the time being.

The large-scale production of first-order iron will make great progress in alloy material technology, and materials are the basis of most technologies.

Along with the movement of Annihilation Technology Company, the science and technology department simultaneously started new research preparations, that is, controllable nuclear fusion technology.

This has been discussed for a long time in the technology sector.

The F-ray generating equipment is the natural container of nuclear fusion reaction. After having enough foundation, it is natural to study the controllable nuclear fusion technology.

The technology is cutting edge and strategic.

Flower growers have always been big importers of energy. Oil, natural gas, and even coal for power generation need to be imported in large quantities.

If we can have a high-end energy technology, even if it is only used to generate electricity, it can also change the environment of passive energy dependence, which is very meaningful strategically.

In addition, controllable nuclear fusion is a kind of clean energy, which represents the future energy technology of mankind, and the benefits of researching such technology are too many.

Of course, the study of controllable nuclear fusion is not easy.

Even up to now, the science and technology department has only decided to "accumulate theoretical technical reserves". After having sufficient theoretical technical reserves, the demonstration of controllable nuclear fusion will be officially launched, and the next step is to invest a lot of manpower and material resources in research.

This is only the first stage.

The first stage of work is confidential, and only top domestic scholars have the opportunity to participate. A team composed of eleven academicians and dozens of professors went to the F-ray experimental base together.

F-ray is an absolutely confidential technology.

The F-ray experiment base also did not list the name of 'F-ray', and some equipment involving high confidentiality is prohibited from visiting.

The goal of the scholar group's investigation is the 'controllable nuclear fission reactor'.

Nuclear fission reactors are of course controllable, but the technical foundation of "controllable nuclear fission reactors" is different. The control method is to use strong annihilation force fields and internal anti-gravity fields to create an environment that limits high-strength reactions, plus other auxiliary Equipment can firmly limit the reaction to a narrow area, and at the same time, reduce the reaction speed and the heat released to the outside.

The group of scholars is very interested in the 'controllable nuclear fission reactor'.

When everyone saw the sophisticated equipment in the center and learned about the related technologies, they couldn't help sighing, "This is the container that controls nuclear fusion!"

"No wonder let us come and see, with this container, coupled with the tokamak ring device, nuclear fusion control has a perfect technology."

"What is the maximum controllable energy intensity?"

"Can power input be achieved?"

Many scholars asked about the parameters of the equipment. After knowing the detailed information, they also discussed in a targeted manner, "This parameter is still far from controlling nuclear fusion..."

"Even if nuclear fusion is controlled, the energy intensity of the explosion is at least twenty times higher!"

"The internal anti-gravity field reduces particle activity, and the outer annihilation force field annihilates energy, but there are limits, and better insulation materials must be used."

"The magnetic field confinement of this device is not good. However, nuclear fission does not need to be controlled. If it is nuclear fusion, magnetic field confinement is very important."

"If it is used as a container for nuclear fusion, the interior is still designed with a reaction channel..."

"External materials are also a big problem..."

"..."

Of course there are many problems.

The research of controllable nuclear fusion is a big project, and it is still in the stage of technology accumulation. The arrival of the scholar group is to understand the equipment, and then conduct research in a targeted manner.

When each problem has a solution and is really put into research, the possibility of success will be greatly improved.

The group of scholars raised a lot of questions, and at the same time, they all felt that they had gained a lot.

They also discussed it before they came, but they didn't expect that the equipment would be so perfect that the nuclear reactor could be restrained with only two layers of force field, which showed that the means of annihilation force field restraint was a feasible solution.

that's enough.

Some people also talked about Wang Hao, and they knew very well that the annihilation force field confinement technology must be directly related to Wang Hao's research.

"Where did Academician Wang Hao go?"

"Why isn't he here?"

Tang Jianjun said, "Academician Wang Hao is also doing related research. He hopes to solve the field force problem, that is, to create a stronger anti-gravity field and a strong annihilation force field."

"At that time, the protection will be greatly improved..."

...

Wang Hao originally planned to go to the F-ray experimental base, and also discussed with the experts of the scholar group the research direction of controlling nuclear fusion technology.

However, a piece of news made him change his mind.

He went to the Institute of Aeronautical Materials.

The Institute of Aeronautical Materials and Donggong Precision are responsible for the experiment of manufacturing micron-sized granular materials. Their research has made great progress, and the granular materials were separated during the experiment.

The main persons in charge of this research are Cao Dongming, Qu Gui and Yang Yunhe.

Cao Dongming and Qu Gui represent the Institute of Aeronautical Materials, and the main experiment is also carried out in the Institute of Aeronautical Materials.

Yang Yunhe represented Donggong Precision. Donggong Precision was responsible for material cutting and processing, and provided some high-end equipment needed for experiments.

At the same time, Donggong Precision's team also needs to study the manufacture of containers and mixers.

The agitator is just one part of the manufacturing process, but just like the fan blades of an aero engine, the agitator is one of the most important components in the manufacturing process.

The successful production of granular materials is also inseparable from Yang Yunhe's research on mixers. His team has produced several types of mixers, and one of the designs has played a role in the successful manufacture. out the granular material.

When the granular material was successfully produced, Yang Yunhe was very excited and proud. He did have the capital to be excited and proud.

The manufacturing process right now is magical just to say the least.

The morphological structure of granular materials is very complicated, and the manufacturing process is just to melt the material and mix it with another superconducting material solution, then use a stirrer to rotate it rapidly in the container, stir it sufficiently and then cool and solidify it to obtain the properties. complex materials.

"This is how Nuwa created humans..."

Yang Yunhe sighed and said, "To be honest, before the research started, I felt hopeless. Even though Academician Wang is very confident, it doesn't sound like a technology that can be completed."

Cao Dongming and Qu Gui nodded together, they also felt the same way.

This technology sounds too high-end, so high-end that it doesn't feel real, but they really made it in the end.

"Although only some small particles are produced, most of them are not shaped, but we have realized the accumulation from 0 to 1..."

The corners of Yang Yunhe's lips curled up as he spoke, "Even Academician Wang Hao can't say anything, right?"

"The main thing is the design of this mixer."

"I have argued many times with others, and I think the design of the three-layer long fan blade is the most likely to produce granular materials. I didn't expect it to be..."

"From 0 to 1."

"Now we are waiting for Academician Wang Hao!"