Heroes of Silver Moon

At noon the next day, Simon slowly opened his eyes from the bed.

Get up and get dressed, Mike is not there as usual, he went to the academy to study early in the morning.

After washing up, Simon rushed to the restaurant to have a quick lunch, and then came to the operation room of the alchemy workshop, and continued to restore the structure of the bolt-action rifle.

The No. 1 model rifle is just a model of iron bumps, which is completely used for reference.

For the No. 2 model rifle, Simon has already restored most of the gun parts.

As long as the trigger, trigger transmission, and aiming baseline are restored, the model of this bolt-action rifle is considered to be made.

Putting the two model guns on the console, Simon began to think seriously.

Aiming at the baseline is easy, as long as you keep it level with the rifling, and then make a crosshair and a notch.

The key is the trigger and the transmission of the trigger. If you don't look at the manufacturing process, the technical level of this part is the highest.

If the knowledge of mechanics and mechanics is not enough, these two parts are really difficult, at least for now, Simon is stumped.

Simon studied history in his last life and focused on liberal arts. Although the basic knowledge of physics and chemistry is okay, he is not able to do it in practice.

But although he is a bit powerless, Simon also has Simon's way.

That is, ask the teacher for help!

Simon didn't believe that, as a senior high-level alchemist, Clifford didn't dabble in mechanics.

After finding Clifford, Simon took out the No. 2 model gun, and Clifford was obviously a little surprised.

He thought that Simon was just a whim, but he didn't expect that this guy was actually improving the Thunderbolt.

Clifford couldn't figure it out. The Lightning Fire Crossbow was expensive and hard to make. It had a short range and was easy to explode. Apart from its power, it had almost no merits. Why did Simon have to improve this thing?

Although he was a little puzzled, since Simon was his student, he would naturally help solve the technical problems encountered by the students.

In the hands of Clifford, the trigger transmission device that Simon had never understood was solved directly by three times, five times and two divisions.

This kind of simple transmission device can't help Clifford, a senior alchemist, at all.

After solving the transmission mechanism, Clifford began to take a closer look at it to see how this model rifle differed from the previous Thunderbolt.

In terms of overall shape, this model rifle made by Simon has added a buttstock and some strange parts.

In terms of overall feel, this model rifle with a buttstock is obviously more suitable than the Thunderbolt without a buttstock.

But the stock has also increased significantly, and the overall weight of the rifle, so Clifford doesn't know whether this improvement is good or bad.

At the rear of the top layer of the rifle, a grooved iron block is added, and above the front end of the barrel, there is an additional iron ring, and a small iron block is placed in the center of the iron ring.

Clifford held the rifle in his hand and tried to take a look, feeling that it should be some kind of aiming aid.

But the arrows of Thunderbolt need to be aimed? Doesn't that thing shoot out dozens of steel **** at once?

So Clifford was skeptical of Simon's added aiming baseline.

Looking at the internal structure of the rifle, the barrel is almost the same as the Thunderbolt. In terms of bullet filling, Clifford was a little surprised.

This structure called the magazine can hold five arrows in one breath, and the elastic wire plate can automatically push the arrows upwards. This boy Simon is quite creative!

However, if he stuffed five Thunderbolt arrows in one breath, wouldn't he be afraid that when the arrows exploded, the user would be blown to pieces?

There is also this thing called the gun bolt, which can not only fire the arrow, but also throw out the waste casing after the arrow is fired, and push the next arrow into the arrow groove. This idea is quite good!

The trigger and transmission, which Clifford himself was busy with, are nothing to comment on.

It is to pull the trigger to drive the transmission device, the transmission device sends a rebound thrust to the firing pin, the firing pin fires the arrow, and then resets under the pull back of the spring.

The spring pulls back to reset the firing pin position. This is done by Simon in advance, but it is quite creative.

In the future, when making bows and crossbows, it can also be used for reference.

After commenting on the model rifle, Clifford handed it back to Simon.

A fairly good improved weapon, full of creativity but not very practical, this is Clifford's final evaluation.

After asking the teacher to solve the trigger problem, Simon took the rifle model and was about to leave, but Clifford stopped him and handed him a copy of "Magic Mechanics".

According to Clifford, although Simon has not yet been certified, he is already considered a qualified alchemist.

In addition to enchanting, magic mechanics, material science and other knowledge should also be dabbled.

Since I came to ask about mechanics today, let's take a look at this "Magic Mechanics" by the way!

More than two thousand pages, not too difficult~www.wuxiaspot.com~just entry level!

After receiving the book, which was thicker than bluestone bricks, Simon was speechless again.

It's still entry-level, after reading this book thoroughly, I can pass the engineer exam in Blue Star!

Back in the operating room, Simon threw the book directly into the space ring. Anyone who wants to read it can read it, anyway, he doesn't read it!

Putting the No. 2 model gun on the console, Simon began to think again.

Now the No. 2 model gun is just a sloppy imitation of the parts of the bolt-action rifle. The parts are too rough to be used in actual combat.

Therefore, Simon had to recreate a more precise rifle compared to this model gun.

Putting the No. 2 model gun on the operating table for reference, Simon picked up the No. 1 model gun, that is, the iron lump with its shape, and began to make the No. 1 experimental gun.

Different from model guns, experimental guns must have more precise components, and everything is based on actual combat.

With the No. 2 model gun as a reference, Simon quickly produced a more sophisticated bolt-action rifle.

The No. 1 experimental gun has been precisely optimized. The size of each part is quite suitable for running-in, and six spiral rifling lines have been added to the barrel.

Putting the No. 1 experimental gun in front of him, Simon nodded in satisfaction.

Now that the gun is more or less ready, it's time to craft the bullets.

The structure of the bullet, brass shell, copper steel core warhead, propellant, primer.

Brass shells and copper steel core warheads, these two are relatively simple, as long as a little copper and iron are used, Simon can directly rub them out with his hands.

Rendering magic steel and magic steel shaping are not only effective on iron blocks, as long as they are metal materials, these two alchemy spells can be used to transform them.