Ultra-Dimensional Technology Era

At this time, an intense negotiation is going on.

There are four parties involved in the negotiation, namely the Shanghai State-owned Assets Supervision and Administration Commission, Microelectronics, and the parent company Shanghai Shanghai Electric and Sisishe.

Cai Zhixing and Gao Zhiyuan came to Shanghai to participate in this negotiation on behalf of Siweishe.

The reason for this negotiation is mainly that Huang Mingzhe hopes that Microelectronics can carry out a reorganization. The products of Microelectronics are all lithography machines above 100 nanometers, and the 40-nanometer lithography machine under development is also in a half-dead state.

The reason why this company can survive is mainly because the country is worried that Westerners will cut off the supply of lithography machines, and it is a backup plan with money.

But now with the rise of Shenguang Instrument Company, the role of microelectronics is already negligible.

"Mr. Cai, if there is a reorganization, how should microelectronics be reorganized?" Qin He, director of the State-owned Assets Supervision and Administration Commission, asked.

"Our plan is for the government to supervise the private sector. In terms of equity division, Sisishe requires 40% and management rights. The government can send personnel to supervise finances and major events, but they must not interfere with daily management."

After Cai Zhixing finished speaking, he took out a copy of the draft terms of rights and obligations, and the assistant at the side copied the document and handed it to everyone present.

Qin He flipped through the pages. Judging from the documents, the Sisi Society had made a lot of concessions, but also had a lot of demands.

For example, the state-owned part of microelectronics will no longer be affiliated to Shanghai Electric and other state-owned units, but will be directly attached to the SASAC.

In addition, there are very detailed regulations and divisions for possible situations that may arise during management. This is a very strict management model, mainly to avoid excessive official interference in the company's daily management.

Especially in terms of personnel appointment and dismissal and salary rewards and punishments, Siwei Society will not allow those people to do anything.

In fact, to put it simply, it is equivalent to the official selling Microelectronics to Siweishe, but the official holds 60% of the B shares.

In this case, it is indeed a test for the SASAC and Shanghai Electric. The four parties negotiated for more than a week, and finally the plan was basically implemented.

3 month 16 day.

Sifang completed the delivery and transfer of shares, and Thinking Society immediately carried out drastic reforms to the microelectronics company.

Gao Zhiyuan didn't expect that after walking around, he ended up becoming the immediate boss of Microelectronics.

Microelectronics Internal Conference.

Gao Zhiyuan faced thousands of people under the stage, he said loudly: "Many people know me, but let me introduce myself, my name is Gao Zhiyuan, very happy to be here."

Clap, clap... Whether you like it or not, the applause rang out as always.

"I won't talk about the official language. The rules of microelectronics will be changed in the future. Those who want to eat big pots, enrich their own pockets, and want to work hard, should consider the consequences." Gao Zhiyuan looked murderous when he said this.

A lot of people down here have already turned ugly, especially those guys who have ghosts in their hearts.

After Gao Zhiyuan's meeting, he took the file bag that Huang Mingzhe gave him, and cleaned up the moths and rats in the microelectronics.

Then some management personnel were transferred from Shenguang Instruments to fill them up, and with the addition of personnel recruited from outside, the internal environment of Microelectronics was greatly improved immediately.

After acquiring Microelectronics, Shenguang Instruments will use Microelectronics to produce mid-to-low-end X-ray lithography machines.

Shenguang Instruments focuses on the research and development and manufacture of high-end lithography machines, covering the lithography machine market in an all-round way.

……

In order to meet the needs of companies such as Ziguang, Huada Semiconductor, and Yangtze River Storage, Shenguang Instrument launched the Shenguang 0.5X-ray lithography machine in mid-March.

Shenguang 0.5X-ray lithography machine mainly has three models of 12nm, 14nm and 16nm.

Since there are already top-level lithography machines of 10-2 nanometers, it is very handy to produce high-end lithography machines now.

Shenguang Instruments only needs to consider how to lower the cost and reduce the accuracy, mainly for those lenses, electronic control, and testing equipment, which can reduce the cost.

In addition, since the top lithography machine has been developed, the research and development costs have also dropped significantly.

The top-level version comes out first, and then the low-end version is developed. It can only be said that this strange model is encountered by everyone for the first time.

综合评估之后，神光0.5—12X射线光刻机（12纳米级），售价为8亿；神光0.5—14X射线光刻机（14纳米级），售价为6亿；神光0.5—16X射线光刻机（16纳米级），售价为4亿。

Although there is only a design plan and no prototype has been produced, the Shenguang 0.5 X-ray lithography machine was immediately welcomed by domestic companies as soon as it was announced.

Tsinghua Unigroup, Huada Semiconductor, Yangtze River Storage, and the former SMIC immediately booked a large number of orders.

The three models of Shenguang 0.5 X-ray lithography machines have received a total of 246 billion orders, and these orders have been scheduled until 2014.

In addition, HiSilicon, and Zhang Rujing, who just came out of the mountain, are also negotiating with Shenguang Instrument to purchase a lithography machine.

……

The capital of Hubei Province - Jiangcheng.

Everyone in SMIC's chip factory was very nervous, even President Zhao Jun and Chief Technology Officer Li Weiguang were present in person.

The engineers of Shenguang Instruments are installing a lithography machine. This is the second Shenguang 1 X-ray lithography machine produced by Shenguang Instruments, and it is also the first lithography machine officially delivered.

After buying such sophisticated equipment as a lithography machine, there is no way to use it immediately. Without adjustments by the engineers of the original factory, chip manufacturers dare not mess around.

All lithography machines sold by ASML not only do not allow chip manufacturers to change parameters and positions randomly, but also install positioning systems and network monitoring.

In other words, ASML knows all about the chips, chip design drawings, and parameters produced by chip manufacturers.

The same is true for Shenguang instruments.

After three days of adjustment by the engineer, the lithography machine was finally ready for trial operation.

"Thank you very much." Zhao Jun quickly signaled to the assistant, who then gave a dozen engineers a red envelope each.

"Then thank you, Mr. Zhao." The engineer captain smiled and accepted the red envelope. This kind of red envelope is not prohibited by the Thinking Society, but you must register with the Finance Department if you accept it.

The trial run started, but the engineers of Shenguang Instruments still left five people, because the chip production line not only has lithography machines, but also other equipment, and the lithography machines must continue to be adjusted during the trial run.

Li Weiguang personally led people to continuously test and adjust the production line.

As a top-level lithography machine, Shenguang Instruments has given a backward compatibility benefit, that is, it can not only produce chips of 10-7 nanometers, but also chips of 30-10 nanometers.

However, SMIC now only has an overall process of 16 nanometers, so it can only kill chickens with a sledgehammer.

Chapter 72 The Butterfly Effect

In March, Huang Mingzhe went to Xi'an.

In this green and yellow season, the vicissitudes of the history of the ancient capital of Xi'an make people nostalgic for the past and hurt the present.

His special car passed the ancient city wall, the palaces of the Qin and Han Dynasties have been turned into dust, and the mansions of the Sui and Tang Dynasties are also hard to find.

The Weihe Plain and Loess High Slope, the birthplace of Chinese civilization, Huang Mingzhe got out of the car, which is a small county in the north of Xi'an.

The ice and snow have just melted, and on the bare ground, there are sparse weeds and shrubs. Not far away is the Dayi tailfield particle collider planned by Hou Yi.