Global Wasteland: Unlimited Upgrades for Vaults

"Even if I use the system to improve the attributes of the workbench to perfection, maybe I can make a shovel, at least it will have a perfect grade!"

Having figured this out, Su Mo was overjoyed, and quickly brought a unit of wood and a unit of stones.

Among all the items, it seems that the stone ax is easier to make. Just saw off a piece of iron, and then find a way to hammer it into an iron piece and stick it on a wooden stick to be a "qualified" iron axe.

Walking to the energy room of the shelter, Su Mo first connected the generator, and after ensuring that the output of the generator was stable, he switched the power of the shelter to the generator.

The cutting and welding of the robotic arm will inevitably bring a lot of energy consumption, and it will definitely not be able to withstand a 400 Ah iron-lithium battery.

After turning on the monster illustrated book and scanning it, and turning on the TV to check that there were no enemies within a kilometer of the shelter, Su Mo felt relieved, put on his raincoat, and came to the workbench.

The workbench made of wood and iron seemed extremely thick. Turning to the left, Su Mo pressed the start-up self-test button of the workbench.

The indicator light emitting red light began to flash, and after three seconds, it turned into a delightful green.

The mechanical arm fixed to the side of the workbench also started to perform a self-test. After a few seconds of shaking, the mechanical arm gradually unfolded, and a position for people to stretch their arms into appeared.

Sitting on the seat, Su Mo tried to stretch his right hand in.

Snapped!

The mechanical arm made a crisp sound, which seemed to detect the work of the pressure sensor, and began to gradually close, completely wrapping Sumo's entire right arm inside.

Trying to move the arm attached by steel, Su Mo only felt smooth and powerful!

Electricity greatly weakens the weight of the robotic arm, so that the arm does not feel the pressure brought by the robotic arm at all.

Looking at the turbine and welder in his hand, as well as a burning device, Sumo raised his hand to the wall, shook his head and sighed;

"Excuse me, i am iron man"

Feel the lines of steel and the various tools on it.

This powerful combination of man and machine made Su Mo feel proud.

"The human body is too fragile, I hope I can persist until the day I create a Gundam armor"

The direction of personal combat power in the future must be to develop towards mechs.

And this day, in the wasteland of the last days, will not be far away!

Putting away the fantasies in his heart, with the convenience of the storage space, Su Mo moved a unit of iron and a unit of wood to the table.

Trying to press the cutting machine button on the left side of the work with the left hand, a burst of thumping sound came immediately.

The saw wheel on the right hand starts to rotate at a low speed. After pressing the button again, the saw wheel speeds up until the third gear is pressed, and then returns to the low speed gear.

After trying a bit, Sumo shifted to low gear and stretched the saw wheel towards the iron block.

Stab, stab!

The dazzling sparks slapped and hit the mask of the raincoat, causing Somo's eyes to ache from the harsh light.

It was the first time to operate this kind of cutting machine. With no experience, Su Mo only felt sour water in his eyes, as if he was about to cry.

"It's difficult, I forgot that people have to wear a mask when they cut, and they have to wear sunglasses."

Taking off the robotic arm, and wiping the acid water left in his eyes again and again, Su Mo came to the utility room and took out the Coke that he was reluctant to drink before.

He took out the Coke, came to Oreo who was still sticking to his post, and fed Oreo a few sips.

Drank the remaining Coke Soma in one gulp.

After carefully tearing off the label on the Coke bottle and putting it away, Su Mo took out the machete harvested in the ruins and began to make a fuss about the Coke bottle.

Under a sharp knife, the resistance of the plastic is basically negligible.

With a little force, Su Mo cut off the mouth of the bottle, and by the way completely cut the Coke bottle in half.

Carefully draw two eye flakes on the Coke bottle with the tip of a knife, pick it up and break it, and the recommended sunglasses made of two Coke bottles are freshly baked.

Taking the tape, sticking two pieces of sunglasses to the place where the eyes of the raincoat see things, Su Mo focused on calling the system, and the attributes of the raincoat jumped out:

【Powerful Raincoat】

Description: An all-in-one raincoat with strong water resistance, weak protection and heat insulation.

Upgrade Direction: Material (20), Windproof (30), UV-proof (10-8), Heat Insulation (15)...

Introduction: Boys must wear raincoats to protect themselves!

"Upgrade Anti-UV!"

After the voice fell, two survival points were deducted, and the pasted sunglasses began to melt, gradually merging with the mask.

After putting on the raincoat again, Sumo sat in front of the workbench and continued the unfinished work.

The strong light and sparks emitted by the cutting machine lost their power under the improved mask.

Ordinary-level workbenches are extremely powerful for the bonus attributes when manufacturing items.

The seemingly solid iron block, in front of the low speed of the cutting machine, seemed to be cutting a green onion with a knife, and it was cut with almost no resistance.

After carefully dividing one unit of iron block into five small parts, putting the other four parts on the ground, Su Mo began to try to heat the iron block.

The arc welding of the right hand suddenly sprayed high temperature and sprinkled on the iron block, and the iron block visible to the naked eye began to change color and became hot red.

Quickly cut off the arc welding switch, a hammer popped out, and Su Mo swung his arm to beat the red-hot iron block.

With mechanical assistance, Su Mo beat for a full minute before stopping what he was doing.

At this time, the iron block has begun to take the shape of the head of an iron axe. Although it is not as good as the systematic mold making, it is not easy for those who are getting started for the first time.

"Fortunately, these manufacturing tools on the tool table are more powerful for processing materials, otherwise the arc welding heating iron block will have to wait until the time!"

After pressing the jet button to quickly cool down the iron axe, Sumo moved the iron piece aside, picked up the wood, and began to saw and polish it with a cutting machine.

After a while, a smooth ax handle was born.

After trying to make the lower edge of the iron piece the same size as the top of the wood, the wooden handle is stuck in the slot of the tool table, and the mechanical arm is a little harder.

A brand new iron ax fresh out of the oven!

Then, he turned the cutting machine sideways, and Su Mo used the blade to complete the grinding work, successfully striking the iron axe.

"It's not too difficult to make an iron ax, as expected of me!"

Taking off the mechanical arm and letting go of the card slot, Su Mo picked up the iron ax still smelling of wrought iron in the card slot.