Comeback 1992

ignition.

Burn everyone's enthusiasm directly.

Let more people notice that the stock market is bullish again, and attract more off-market funds to enter the stock market.

Then comes a big harvest.

Tang Yan has already discussed with Chen Xin, and at the right time, directly enter the market with large funds.

In April, Han Songlin also went to the South China Sea, so of course he didn't go to watch the rocket launch this time.

But to attend the economic forum.

The current global economy is not good, but in comparison, Huaguo's economic development has become the only bright spot in the world.

Even with the decline in economic growth rate, it is still the fastest growing economy in the world.

Chapter 1128

In late April, Han Songlin took a plane from Nanhai to Yuzhou, and then went to Xinghai Special Steel from Yuzhou Airport.At this time, the life of the entire steel industry is not easy. There is a serious excess of steel production capacity, and the action to reduce production capacity is extremely difficult.

Now is resistance, to see who can survive the "cold winter" and welcome the arrival of "spring".

The cold winter in the steel industry has little impact on Xinghai Special Steel.

Xinghai Special Steel does not produce ordinary steel, but special steel.

Globally, special steel is still a high value-added product.

Many countries are not able to produce.

In China, the demand for special steel has always been quite large, so Xinghai Special Steel is still in full production at this time.

Han Songlin didn't come to Xinghai Special Steel to find fault.

Before coming here, Han Songlin still called Chen Dong, and Chen Dong would definitely arrange to do all the things that should be done well.

Therefore, when Han Songlin was visiting the Xinghai Special Steel Factory area, he didn't say anything about looking for problems in production.

Just one thing is emphasized: safety issues.

"Last year, Xinghai Special Steel did not have any major safety accidents. This is a very good thing, and it must be maintained in the future. If there is a safety accident, the factory will carry out a safety rectification, and then lose money if it should be lost. But for As far as the employees are concerned, their families are ruined."

Chen Dong: "Safety has always been the most important thing in our production. The factory will organize a safety training every week, and the team leader will emphasize it again before going to work every day."

As for other security facilities and the like, it goes without saying.

All of them wear helmets on duty.

All helmets and labor insurance supplies are distributed by Xinghai Special Steel.

Han Songlin picked up the two helmets and directly collided them with force, leaving no trace of the helmets.

In terms of quality, you can tell that it is not a crooked product (fake product) from the appearance when you get it.

When Chen Dong saw Han Songlin's actions, he smiled lightly. He didn't dare to be negligent in terms of safety.

If there is a safety issue, their performance points will be deducted.

It goes without saying how important performance points are in Xinghai Group.

After looking inside the factory, Han Songlin and his party went into the office and sat down.

Han Songlin listened to Chen Dong's report. Regarding the business report and so on, he let him take it over in one stroke, mainly about the research and development of Xinghai Special Steel.

In the past, Xinghai Special Steel could be called the mother of Southwest industry.

Now, this position cannot be discarded.

The industrial steel in the entire southwestern region is basically supplied from Xinghai Special Steel.

Steel for automobiles, airplanes, engines, machine tools, railways, etc. are all provided by Xinghai Special Steel.

At the end of the last century, Xinghai Special Steel obtained a lot of material formulas and research materials from Eastern Europe.

Xinghai Special Steel conducts verification and production of the formula, and then conducts research to form its own production mode.

In these years, Xinghai Special Steel has been continuously investing in technological innovation and research and development.

In terms of steel technology, Xinghai Special Steel is definitely the only steel company in China.

In the whole world, there are few steel companies that can match it.

Because Xinghai Special Steel is the only technology-based steel company in China, during the cold winter of steel last year, Xinghai Special Steel's revenue and profits did not decline, but both rose.

Next, we talked about this steel winter.

If the cold winter of steel wants to pass, it is inevitable to reduce production capacity.

It is even normal for some steel companies to be eliminated.

This year, isn't there already a steel company that has completely shut down production.

For steel enterprises, as long as they can continue to operate, they will not stop production.

For steel enterprises, the suspension of production is also a matter of "severe tendons and bones".

It is not easy to get to this step.

Unless it's really not okay.

This time, Sanjin Xinhai Iron and Steel Group broke its capital chain and stopped production immediately, which also caused a shock in the domestic capital circle.

In fact, Xinhai Iron and Steel has always been relatively concerned by public opinion.

Li Zhaohui of Xinhai Iron and Steel married Che Xiao, a female star in the entertainment circle in 2010, but they divorced again in a short time.

The extravagance back then can only make people sigh: "Money cannot buy true love."

"We have also noticed the matter of Xinhai Iron and Steel. Now, although Xinhai Iron and Steel and the local government want to restructure their debts, the creditors want to liquidate Xinhai Iron and Steel."

"If Xinhai Iron and Steel is going on like this, it's basically over anyway, and it's impossible to slow down."

Chen Dong is very sure of this point. After the company encountered a major setback in its operation, its upward development trend was directly interrupted.

If you can't go up, you can only go down in a short time.

To be able to maintain stability is quite awesome.

Han Songlin nodded slightly. For them, this matter was just a matter of discussion.

After staying in Xinghai Special Steel for less than three hours in total, Han Songlin and his party went directly to Yuzhou.

Yuzhou Changxing Machine Tool was established on the basis of the previous Yuzhou Machine Tool, and is currently the most technologically advanced machine tool manufacturer in China.

Needless to say, how good Changxing Machine Tool has developed over the years.

On high-end machine tools, it can be regarded as breaking the monopoly and blockade of foreign countries.

Han Songlin came to see the intelligent machine tool C5.

The future industrial production will enter the era of intelligence.What about the product?

will enter the era of customization.

Customized production means that it is no longer the same as before, and the production line remains unchanged for a long time.

Now new requirements are put forward for the production line, which must be able to continuously change according to the production plan.

The production line is producing product A in the first minute, and after a short adjustment, the production line can produce product B in the next minute.

After years of research and development, the intelligent machine tool C5 has finally come out.

On C5, Changxing Machine Tool can invest quite a lot.

For this reason, Xinghai Group is also constantly injecting capital into Changxing Machine Tool, otherwise, it really can't hold on.

Looking at the machine tool in front of me, the whole machine tool is full of sense of technology.

In terms of operation, C5 is as simple as possible.

Many things don't need people to operate at all, and the whole thing is controlled by the system.

What you want to produce, you only need to enter the drawings.

Even, there is no need to come to the site, just sitting in the office, you can connect to the C5, and then directly operate the C5 for production.

Of course, putting in materials and so on has to be done by people.

It can be equipped with a mechanical arm or something on the side to place materials specifically.

The control program system of C5 is written in easy language and displayed in Chinese.

C5 intelligent machine tools are also prohibited for export.

With the strengthening of scientific and technological strength, Huaguo also has a list of sensitive technologies prohibited from export.

Looking at this list, you can know the technological strength of the enterprise.

Han Songlin looked at the running C5 intelligent machine tool through the glass.

During the operation of the entire machine tool, no one needs to do anything.

The tool change and so on are all automatic.

During the entire machine tool processing process, everything is automated, just wait for the required parts to be processed.

Chapter 1129

"C5, when will it be officially put into the market?" Faced with Han Songlin's question, the designers of C5 were at a loss as to how to answer it.

As a next-generation machine tool, C5 is a key research project of Changxing Machine Tool.

However, no matter how high the technical content of C5 is, there is one thing that cannot be denied.

Expensive!

C5 is super expensive.

At this time, the super expensive C5 has no market prospect.

reason?

It's very simple, if you buy a C5 to go back, you might as well buy other machine tools.

As for the inability to produce intelligently, what does that matter? Human beings are the least valuable at this time.

At this time in Huaguo, there are no workers to worry about, and going to work in a factory is still the first choice of many people.

After all, the wages in the factory are relatively high.

But in the next few years, the situation will change completely, and the factory's wages will not show any advantages.

Labor costs will rise rapidly.

The increase in labor costs will inevitably force factories to upgrade production technology, and a large number of industrial robots will be used on the production line.

Repetitive labor positions will be continuously replaced.

There are always many difficulties in this world, but there is never a shortage of solutions.

"Boss, the C5 has been put into the market, but the sales volume is very poor. It has been two months since it was launched in February this year, but only three units have been sold. These three units were purchased by Fuxing Power and Fuxing Industry .”

As he spoke, the sound became smaller and smaller.

These three are estimated to be internal support.

Han Songlin couldn't help frowning, he really didn't notice that C5 was already on the market.

The sales of C5 were not good, so naturally no one took the initiative to bring this matter up in front of Han Songlin.

After all, this project belongs to Han Songlin who attaches great importance to it.

So much money has been invested, but now there is no return. No matter how you look at it, there are problems.

If other companies faced money-losing projects, they might just cut them off.

Will Changxing Machine Tool cut off the C5 project?

Obviously impossible.

Intelligent machine tools are the inevitable development route of machine tools in the future. The small market now does not mean that it will be small in the future.

C5 is currently not competitive enough in the market, but that doesn't mean it will be the same in the future.

Technology will continue to improve, and so will the C5.

Han Songlin wondered, "Have you analyzed the reasons for the poor sales?"