From Almighty Scholar to Chief Scientist

So just like that, everyone present quietly looked at Lin Xiao's drawing, and then cast admiring eyes.

Some people were asked to simply take out their mobile phones and record the video, but they were stopped after only a while. After all, maybe what Lin Xiao was going to draw was a key part?

Of course, the person who made the video was already satisfied, because he recorded the image of Lin Xiao drawing parallel lines and circles. This alone was enough to shock the outside world.

In this way, as time passed, the image on the first piece of paper gradually became clearer, and everyone present knew what Lin Xiao was painting.

a servo motor.

It includes various structures, wiring arrangements, and even the positions of screws and nuts.

Until the end, Lin Xiao drew the last line segment, and a drawing that couldn't be more perfect was born.

And according to this engineering drawing, Chen Yuanchun and his mechanical structure team can make this thing out of almost any random person.

Of course, there is the most critical step, that is, size, angle and so on.

Of course, the drawings on the engineering drawings are all enlarged and reduced in proportion. The size needs to be determined in advance. Without the size, of course it is impossible to make it.

It is obviously impossible for Lin Xiao to forget this kind of thing. Next, he began to mark the size.

It's just that when he marked the size, it almost seemed as if he wrote it out casually, which made the people present afraid that he made a mistake.

So it didn't take long for Lin Xiao to mark all the dimensions, then picked up the paper and handed it to Chen Yuanchun: "This is the picture of the servo motor."

Next, he started to draw the second picture, again, directly without using any ruler.

At this time, everyone also turned their attention to the first picture that Lin Xiao had drawn.

And Chen Yuanchun took the picture of the servo motor, swallowed, then picked up the ruler that Lin Xiao didn't want from the side, and started to measure it.

He wanted to see if the dimensions given by Lin Xiao were in proportion to the actual image.

For example, in the drawing of servo motor given by Lin Xiao, there is a rectangular pattern, the size requirement is 129.6mm in length, 86.4mm in width, and the ratio of aspect to width is 1.5, then the actual aspect ratio of the rectangle drawn by Lin Xiao , is it 1.5?

So, he measured it with a ruler, and then his eyes widened.

The length is 9cm, the width is 6cm, and the aspect ratio...is also 1.5!

Is this really true?

He didn't believe in evil, and tried other ratios, but in the end they all got the same result, the ratio was exactly the same!

He was shocked.

At the same time, the people around also saw the results of his measurement, so they all widened their eyes, looking at Lin Xiao with disbelief.

Is this... Really human can do it?

2 Eighty chapters plan completion time: October

They usually draw engineering drawings with CAD, but now unless it is for exams or classes, no one still draws by hand. After all, hand drawing is not like that on a computer. It can be modified at any time, and it is convenient. It is far from being as easy as drawing on a computer, and it takes a lot of time.

As a result, now Lin Xiao showed them what it means to draw by hand faster than by computer.

Lin Xiao is just a straight line and a circle, and even the dotted line is like a timer.

All the people present felt extremely convinced, even though they had been convinced many times.

But those things used to rely on IQ, but now they rely on people themselves. Everyone can draw drawings on paper, but it is impossible to draw to Lin Xiao's level.

Of course, let's not talk about the latter now, and continue to discuss the former, relying on IQ.

They didn't forget that the thing Lin Xiao drew was not an ordinary thing, but a servo motor.

All kinds of information in it are extremely detailed, and even Lin Xiao marked various detailed information beside it, such as what materials need to be selected, what internal parts need to be selected, and so on.

It basically means that they can directly arrange people to manufacture this servo motor after taking this picture.

Thinking of this, they hurriedly continued to turn their heads to look at Lin Xiao.

Looking at the picture that Lin Xiao was drawing at this time, it seemed that a new mechanical mechanism appeared between the line and the circle.

Everyone present couldn't help but look forward to it, this time, what is Lin Xiao painting?

So they all held their breath, waiting for Lin Xiao to draw the final result.

In this way, time passed slowly, and the things on the second engineering drawing gradually became clear. Chen Yuanchun glanced at it, and this should be the base part of the double workbench.

Double workbench, naturally two workbenches, the previous lithography machine only had one workbench, this workbench needs to accept the pre-scanning work on various sensors first, ensure the position is aligned, and then go to the light source for exposure, This kind of efficiency is relatively low, and the double-table technology is to expose and scan at the same time. While one wafer is photolithography on one table, the other wafer is scanned on the second table, and then the first wafer is scanned on the second table. After the lithography of the first wafer is completed and the scanning of the second wafer is completed, the positions of the two are reversed, one continues to expose, and the other continues to scan the new wafer.

This method greatly saves time and improves the efficiency of the lithography machine, so it can be said to be one of the indispensable structures for the lithography machine.

The base part of the double worktable is even more important, because the double workbench is moved by magnetic levitation, which is stable enough and can avoid problems such as wear caused by excessive friction.

Of course, this also places great demands on the precision of the magnetic levitation. The magnetic levitation uses the effect of coming and going, and how to achieve precise control also places great demands on the structure inside.

So the base structure that Lin Xiao is painting now is very important.

However, Lin Xiao did not directly draw the entire base structure, but divided it into several parts to draw. After all, the base is very large and involves various sensors, which he cannot draw on a piece of paper. .

In this way, the second drawing is finished. This is the frame of the base structure, which mainly draws the position of the wiring and the position of the servo motor. In addition, there are other specific positions of various components. Simple Generally speaking, this is an internal structure diagram, but the structure of the internal structure is not detailed.

Of course, at this time, people were surprised to find that the servo motor in the first picture can be perfectly embedded in the position of the servo motor in this picture, and the two can fit perfectly no matter what the proportion is or what .

This also shows that Lin Xiao had already prepared for their overall layout before drawing these pictures.

At this time, they suddenly remembered one thing.

Didn't Lin Xiao just get their technical information?

And Lin Xiao shouldn't have studied double workbenches before, right?

Although Lin Xiao has studied machinery, the eight-point structure is one of his masterpieces, but the double workbench can be regarded as a delicate job, and it can be regarded as a large project. Can it be drawn on the drawing?

Is Einstein and Newton together so awesome?

These people here couldn't help but look at each other. At this moment, they all had an idea, they wanted to take apart Lin Xiao's head to see if there was a computer lying in it, and then look at his body. Not a robotic arm, otherwise how could he do it?

Everyone looks like a human being, and the volume of their brains is almost the same. Why is it different for you?

At this time, they finally understood what the doctor who dissected Einstein's brain was thinking.

After all, facing such a person, everyone is very curious.

Of course, there were still people present who were not curious, and that was Kong Huaan. At this moment, he was leaning on the back of the chair, stretched out his hand and yawned, showing no interest at all.

Looking at this group of fussing people, everyone is at least ten years older than him, so you can't imitate him, calm down?

Isn't this basic practice for their chief teacher Lin?

Alas, looking old, he is actually a little young.

He simply took out his phone and opened the delivery app, "What's for lunch today?"

……

The meeting lasted from 08:30 in the morning to [-]:[-] noon. Actually, there was no meeting at all. Lin Xiaoxiu talked about it for a short time, and then it was time for Lin Xiaoxiu to operate. Of course, Lin Xiaoxiu did not delay their time when he arrived halfway. In time, everyone in the other groups left, leaving only the mechanical structure group, including Chen Yuanchun, and after Shan Tianbo left, the leader of the double-workbench R&D group who came up to replace him, and several other main researchers .

Of course, even though he allowed others to leave first, some people still stayed and wanted to continue to worship Lin Xiao.

And when the time came to twelve o'clock, Lin Xiao just finished the last stroke.

Ten sheets of A1 paper have just been used up, and each sheet has already drawn a pattern that looks like a printout. Different color pens make the layers of these drawings very clear, very simple and easy to understand.

If it is a doctoral project, the responding teacher will probably give a high score based on these drawings alone, but now Lin Xiao made it, so for Chen Yuanchun and others who often draw drawings, this can be directly shouted. It's a teacher.

Putting down the pen in his hand, Lin Xiao twisted his wrist and said to Chen Yuanchun: "Okay, let's build it according to these drawings. The parts in it can be directly used from the previous double workbench. The specifications are basically the same. I basically drew all the parts with different specifications, and if there is any problem later, just come to me directly.”

"Okay...Okay." Chen Yuanchun took the last drawing drawn by Lin Xiao, looked at the things on it, then swallowed again, and responded with some difficulty.

Lin Xiao picked up the water glass next to him, took a sip, and asked, "What's wrong?"

Chen Yuanchun said helplessly: "Master Lin, if you don't make a move, you'll be scared to death. How did you do it?"

Lin Xiao smiled, "That's how it was done, didn't you see it too, I just drew the lines a little straighter and the circles a little rounder."

Chen Yuanchun: "...then you are quite modest."

Lin Xiao smiled, and didn't pay much attention to it. For him, it was just a simple matter. What's more, there is no such thing as a master of painting who can easily draw straight lines and circles like him.

As for the fact that the proportions are exactly the same, it is no big deal. When his brain development reaches 6%, he can easily see the proportions of various objects around him, let alone his current When it reaches more than 8%, this kind of thing is even simpler, even he can see the length of a line segment, and it is directly accurate to the millimeter level.

All in all, if he gets the most powerful brain, he can directly take the first place in any project.

Of course, he definitely won't participate. Who knows if someone will set up a shady scene, and then use him as a stepping stone to become famous in order to praise someone.

As for why he can draw things easily, this is even simpler. After all, the knowledge exchanged with the system exists directly in his mind. When he draws pictures, he only draws the things in his mind. So there is no difficulty for him.

"Then let's go here first today, and now it's time for dinner, so we can prepare to eat." Lin Xiao said: "You will build according to this later, the speed must be accelerated, and the quality must be guaranteed at the same time."

"Now we have completed 40% of all parts, and the remaining 30.00% are on the double workbench, and the remaining 30.00% are other parts that are compatible with the optical path system. Now the RDX pure silicon crystal has been manufactured It's out, so it won't take long for the 30.00% to be completed, and the final task will fall to your team."

Chen Yuanchun nodded, patted his chest and said, "Master Lin, don't worry, within three months, I promise to make something!"

Just kidding, now that the blueprints are available, even the split structure has been drawn, which is much more detailed than Lego. If this can't be made, he might as well just quit his job.

"That's good, then I look forward to your good news."

Lin Xiao smiled and nodded.

"Definitely no problem."

Chen Yuanchun laughed.

"Okay, that's it, are you hungry? Let's go to the cafeteria and have a meal together."

"Row."

Afterwards, without further ado, they left the place together and went to the cafeteria.

And this meeting is officially over. At the same time, it also determines the future direction of the X-ray project. Probably no one can think of it. Everyone thought that this meeting was going to discuss how to solve the problem of the double-workbench research team. It's a human problem, but Lin Xiao didn't expect Lin Xiao to directly draw the double workbench structure they needed, and even completed the servo motor technology inside by the way.

As I said before, they have been able to manufacture a servo motor that meets the requirements, but the compatibility between the servo motor and the double workbench is not good enough, and there are some mechanical problems, so Lin Xiao drew a new one. Servo motors to them.

The next step is to wait for the [-] parts to be completed and shipped to them. The Dingguang Research Institute is building a dust-free workshop. In the future, it will also be responsible for the assembly of the first machine of their Huaguo lithography machine.

"Well, within three months, if Chen Yuanchun can complete it, it means that the assembly can start in June."

After dinner, Lin Xiao returned to his office.

After recalling today's meeting, he began to think.

And in July, he is going to attend the International Conference of Mathematicians. After returning, he may be able to complete the assembly. Of course, after the assembly is completed, it will take a period of debugging work.

"Then... try to finish it before the National Day."

Lin Xiao made a decision.

He wants their X-ray machine to emit the first light on National Day.

Of course, for the next period of time, he is basically idle, because now all technical problems have been solved, and the last piece of the puzzle of the double workbench has also been completed. The next step is Put all the puzzle pieces together and put together their lithography machine.

"However, the International Congress of Mathematicians..."

Suddenly, Lin Xiao remembered this matter again.

He still has to submit the one-hour report he planned to do in April.

And today, it's already late February.

He scratched his head and said helplessly, "I didn't expect that I would also face a deadline."

No, when he participated in the International Congress of Mathematicians last time, he also faced a deadline, and he can still remember those days of staying up late.

Shaking his head, he took the draft paper from the side, and was about to think about what he should say when the time came, but suddenly, a few mathematical formulas flashed through his mind.

【ζ(1/2+it)=O(t^e)】

【ζ(1/2+it)/(t^e)=O(√plnp)】

It was the two formulas he captured in his mind when he spent truth points just now!

Chapter 281 Trying to Explore the Darkness

【ζ(1/2+it)=O(t^e)】

【ζ(1/2+it)/(t^e)=O(√plnp)】

Looking at these two formulas that probably came from the system accidentally, or because there was a real bug in the system, Lin Xiao naturally thought again of the similar figures he saw in the darkness deep in his mind just now. Outline.

What are those things?

Is it related to the system?