Douluo god level fire shadow

For Shrek's students, it may have reached a new stage now, because everyone is approaching the soul master or soul sect, and they should go to the Star Dou Forest to hunt for soul rings.

And taking advantage of this spare time, Tang San went to the blacksmith's shop several times, bought the stove and other blacksmithing tools back to Shrek Academy, and prepared to do a big job.

These years Tang San also saved a lot of money and bought a lot of precious metals.

For this reason, Tang San specifically asked Flender for an empty room of about [-] square meters, in which all iron tools such as forging furnace and iron felt were prepared, and then he was ready to start work.

Tang San is a diligent person, he is very patient, he stayed in the blacksmith's shop for several days before he finally finished the forging furnace, then lit the iron felt with a torch, and threw them into the furnace together.

Tang San was very careful when doing things, for fear of making any mistakes, after all, it is not as good as before, who knows how good things can be forged this time?

After staying in the operating room for two hours, Tang San took out the stove and put it in the bottom of the stove.

"Dangdangdang!"

A dull sound came out, and the heat wave in the furnace rolled up, and the flames burned more and more vigorously, making bursts of neighing.

Tang San's face brightened, he quickly stretched out his hand to touch the iron felt.

A smile appeared on Tang San's face.

He took out an iron ingot, and knocked on his furnace a few times, feeling that the power transmitted from the furnace was sufficient, this feeling made Tang San very satisfied.

Thinking of this, Tang San's spirit immediately cheered up, and he continued to hammer the steel plate at the bottom of the furnace with greater strength.

After staying in the tempering room for a while, the steel plate at the bottom of the furnace was tempered to be as smooth as a mirror.Tang San stopped exercising.

Seeing the scene in the training room, he couldn't help showing a satisfied smile.

The materials in the hammering room were made by himself. Although they are not high-end materials, they are much stronger than ordinary forging furnaces.

Tang San put away the steel plate at the bottom of the furnace, and then took out something from the bottom of the furnace.

Do it when you think about it, Tang San picked up the hammer, cut off the iron piece by piece, then threw it into the furnace, and started forging.

The temperature in the furnace was extremely high, and the iron pieces were constantly melting in the lava, but Tang San didn't close the furnace, but continued to forge, because Tang San felt that this forging method still had a certain degree of difficulty.

After a while, the iron sheet in the furnace had been completely melted.

But Tang San still continued to forge.

Tang San inserted a whole iron rod into the iron tank, then fixed it, and then added other substances, until they were all fused, then pulled out the iron rod and threw it into the furnace.

Following a series of forgings, thick mist began to diffuse around Tang San's body, amidst the steam, the temperature in the furnace rose even higher, Tang San's forehead began to ooze sweat, and his face also turned red.

The pain of this kind of exercise is no less than that of a soldier fighting against the enemy on the battlefield, constantly consuming his physical strength.

But he likes this feeling very much.

It's like he's polishing a gem right now.

Tang San didn't know how long this speed of training could last, but he knew that this was a very precious opportunity.

Tang San wasn't worried about the consequences of failure, on the contrary he looked forward to forging something good.

He kept exercising, and finally polished the anvil and iron frame, and put them on the bottom of the furnace.

Because of the increase in soul power, it is now more handy to swing the hammer.

Taking advantage of this opportunity, he resorted to the chaotic cloak wind hammer technique, swinging the nine-nine-eight-one hammer in succession, until his whole body was soaked in sweat, and then he stopped to rest for a while.

When Tang San was resting, another slight sound came from the furnace.

Tang San knew that the iron embryo's hammering sound became more and more clear, indicating that the iron embryo's hammering was getting stronger and stronger.

While the iron slabs in the furnace became harder and harder, lines gradually appeared on the iron slabs, and gradually became shallower, leaving only a thin line in the end.

Tang San looked at it, nodded in satisfaction, and then began to forge the second iron embryo.

At this time, there was a booming sound in the furnace.

Tang San looked at the top of the furnace, the furnace above was still so hot, but the temperature inside the furnace was still rising continuously.

Tang San knew that his training method was still not good.

Although Tang San's hammering technique is very proficient now, if he wants to forge more powerful equipment, I'm afraid there is still a long way to go.

If the soul power level is higher and the strength is stronger in the future, then the hammer technique will be more exquisite and the strength will inevitably be stronger.

This is called blacksmithing and you need to be hard on your own.

While resting, Tang San forged another batch of steel bars and put them into the furnace for tempering.

The tempering time is very short, only a quarter of an hour is over.

After being hammered, the iron sheet became tougher and thicker, and different patterns and lines appeared on it, making these patterns more vivid.

Tang San took out all the iron pieces, and then placed the iron pieces one by one according to their original positions.

This batch of iron sheets was forged by him with iron nails made by himself.

The shape and material of the iron nails were exactly the same as the iron plate Tang San polished before, only the color was different.

His forging method is very simple. First, put the forged iron pieces in the furnace for tempering. Soft becomes hard.

The forging process is relatively slow.

But after forging, the weight of the iron sheet will become lighter, but the toughness of the iron sheet will be stronger.

And this forging method also has an advantage, that is, the quality of the steel sheet can be guaranteed when used, and the steel sheet will not become brittle due to the hardening of the steel sheet, which will affect the hammer.

Of course, this is limited to the hammers used by low-level blacksmiths. As for the hammers used by high-level blacksmiths, special forging instruments are used to make them stronger and tougher.

The reason why senior blacksmiths are called senior blacksmiths is that apart from their skills, the main reason is that their hammers have a skill attached to them, which is to enhance the defense of forged products.

Tang San placed the iron pieces next to the furnace one by one, began to check his tempering results, then nodded in satisfaction.

Seeing the steel ball in the iron ball, his eyes lit up involuntarily.

Tang San looked at the furnace, felt that the iron ball was still too small, and the iron particles inside were not condensed enough, so it had to be increased.

He did not modify the hammer this time, but directly forged it into a conical iron lump. The hammer head was also extremely sharp, enough to bear a weight of about sixty to seventy catties.

Tang San put the iron lump into the furnace.

"Snapped!"

After the iron mound hit the furnace, there was a crisp sound.

And when Tang San was very busy, he only heard someone knock on the door.

"Who's coming over at this hour?"

Tang San was hesitating and opened the door to see, it turned out to be Yu Yi.

"Brother Yu Yi, what do you want from me?"