I tinkered with cars and built a super military industry

Jin Lao came to the back of the tank.

The engine compartment was opened.

Finally he saw the dynamic system device he wanted to see.

In this engine compartment lies a special V12 engine.

Especially Mr. Jin looked back and forth several times.

Only then did I realize that there was a vertically mounted turbofan engine next to it.

The input shafts of turbofan engines and reciprocating engines are all integrated into the gearbox.

Double input shaft, single output shaft.

The rotation speed of the two axles is one main and one auxiliary. Whoever is faster is the main one.

It turns out that the twin engines are designed like this. It is indeed exquisite. Mr. Jin couldn't help but admire it.

However, according to the fuel consumption of the tank per [-] kilometers provided by Yan Hua, it is less than [-] liters.

This made Mr. Jin a little puzzled.

The fuel consumption of the twin engines is less than [-] liters per [-] kilometers, which is unjustifiable.

Another thing that Mr. Jin didn't think about was that it was a dual engine.

The acceleration of this tank is too exaggerated.

It accelerates from [-] to [-] mph in [-] seconds, and that’s on mountainous terrain.

If it is on the road or accelerating in a straight line, many family cars cannot outrun this tank.

This nearly [-]-ton tank can accelerate to zero hundred in [-] seconds.

It's impossible for twin engines to have that much power.

Mr. Jin searched in the engine room for a long time.

Slowly exited the engine room.

The engine room's cooling system, oil supply system, exhaust system, etc.

It is too different from the traditional tank power system design.

At the same time, the engine design logic of the tank in front of me is quite different.

The engine design of the tank in front of me is a completely new idea.

Even if Mr. Jin touches the real thing, he won't be able to fully understand it.

Mr. Jin then entered the tank.

Three rows of energy storage power supplies are found in the cockpit.

In order to dissipate heat, these graphene power supplies are all exposed to the outside.

These energy storage power supplies look special.

It looks like a disc.

The color is dark gray.

The stacked thickness is about ten centimeters.

Under the instruments in the cockpit, there are three rows of energy storage power supplies.

Mr. Jin crouched down, holding a strong flashlight, and repeatedly checked the power supply.

His brows became more and more wrinkled as he looked at it. He looked at it for more than half an hour, but he just couldn't understand it.

These batteries are neither lead acid nor lithium.

Among all types of batteries, there is no such type of battery.

No wonder the electromagnetic gun can fire normally mainly because of these special energy storage power sources.

After Jin Lao got out of the tank, he felt a little confused.

He suddenly felt that he was old and could no longer keep up with the technology of this era.

I touched the real thing with my own hands, but I didn't even find out what it was.

......

Early the next morning.

In a simple European building inside the Chinese Academy of Sciences.

Li Yifan was getting up and washing on the balcony.

You can also see farmland not far away from the balcony.

It's much more comfortable than washing in front of the sink.

Maybe it’s because the air is good, or maybe people in the Chinese Academy of Sciences like to keep in good health.

Many people get up early to exercise and run.

Just when Li Yifan was looking downstairs, he happened to see Mr. Jin doing Tai Chi downstairs.

Li Yifan was confused. This park is so big, why did he like to practice Tai Chi here?

After simply washing and tidying up, Li Yifan went downstairs.

When Mr. Jin saw Li Yifan, he put away Tai Chi.

Then the two of them went to the cafeteria to have breakfast together.

There are all kinds of geniuses in the Chinese Academy of Sciences.

I'm not curious about Li Yifan and Jin Lao's long-lasting friendship.

"Classmate Yifan, can you tell me about the dual-engine design of your tank?" asked Mr. Jin.

"That's it for twin engines."

"Actually, I don't even understand some theoretical knowledge myself."

"If you really want to know, I can build a few tanks."

"You will understand after watching it a few times." Li Yifan said.

Li Yifan doesn't like to talk about theoretical knowledge with others.

Compared with theoretical knowledge, Li Yifan prefers hands-on practice.

When Li Yifan said that he wanted to make and assemble tanks by himself, Jin Lao's eyes suddenly lit up.

"Okay, classmate Yifan, I also like to take action directly." Mr. Jin said excitedly.

After breakfast, Li Yifan followed Mr. Jin to the tank manufacturing workshop.

After Li Yifan looked around for a week, he found that the conditions here were much better than those at the South China Military Institute.

After Li Yifan got familiar with the workshop briefly, he started to work on it.

Mr. Jin helped Li Yifan.

Li Yifan found suitable steel materials, including compressed steel.

Let’s start making the body part of the tank first.

Under the guidance of the system, Li Yifan used a laser gun to cut the compressed steel plate.

After cutting the compressed steel plates required for the car body.

The automatic beam is used to cut and reserve some preliminary holes in the car body and beams.

Then, the compressed steel plate cut by the laser gun is put into a two-thousand-ton press to press out the shape.

After making the girder.

Li Yifan used the gantry to lift the shaped steel plate onto the beam.

Then they were welded together with electric welding.

After simple fixation, the robot is used to perform thousands of precise welding steps.

Because Li Yifan had experience in manufacturing tanks once.

This second time, it was even easier to operate.

Jin Lao was watching the whole process.

I was very surprised by Li Yifan's smooth workmanship.

In fact, in the manufacturing process, the most difficult step is to create drawing data.

Therefore, when cutting compressed steel plates with a laser gun, height calculations must be made.

For manufacturers, drawings are always at hand at this stage.

Because if there is a slight mistake, it will be very troublesome or even scrapped.

But not only did Li Yifan not read the drawings, but he was also quite confident and casual when cutting the steel plate with the laser gun.

When using a beam to open a hole, it is also done in one go.

Old Jin originally wanted to speak.

But seeing how confident Li Yifan is, and he is the one doing it himself.

Mr. Jin is now a scholar and has no right to speak.

Even if Li Yifan is wrong, Mr. Jin can't complain.

After all, Li Yifan is currently the only one who can build an electromagnetic railgun tank.

Who told this tank to be equipped with an electromagnetic rail gun, dual engines, and a vertical missile launching system.

Being able to upgrade these cutting-edge technologies across the ages means that it is not that easy to build.

So even if some raw materials are destroyed, it is natural.

After thousands of rumbling welds by a robotic arm.

Mr. Jin was finally able to help Li Yifan.

Holding the electric welder, Li Yifan and I began to clean the welding seams.

When Jin Lao is looking for welds, he needs to turn on the light as in the traditional way.

It seems particularly slow when finding gaps and leaks easily.

For Li Yifan, who has a scanning and modification system, there is a world of difference between the two.

After Li Yifan passed the scan, it was clear where there were gaps.

Therefore, when Li Yifan was mending seams, his whole movements seemed free and easy.

Mr. Jin frowned as he watched Li Yifan's sewing movements.

Is there such a thing as patchwork?

Not even light?