Siheyuan: My wife is Xu Huizhen

Milo Moreno slapped his forehead suddenly, smiled as if he had suddenly realized something and said:

"Oh my, look at my brain, it's so muddled! Actually, this technology is not unique or one-of-a-kind high-end technology."

Nowadays, there are numerous manufacturers of CNC lathes.

Although every company has some characteristics and unique features of its own, when compared with other peers, they have not been able to form a very significant competitive advantage.

Thinking in this way, passing on this technology to He Yuzhu does not seem to be a earth-shattering event.

However, the necessary procedures still have to be followed, so when signing the contract, one thing must be specifically noted - He Yuzhu is absolutely not allowed to transfer this technology to any third party without authorization.

Immediately afterwards, Milo Moreno made this request without hesitation.

As for He Yuzhu, he agreed without even thinking about it, and vowed:

"That's definitely no problem! We have to follow the rules when doing business."

At this moment, he was making a wishful calculation in his mind. As long as he could successfully obtain this technology, and then hand it over to the big leader, that would be enough.

After all, there is no so-called patent law in the mainland, and formal diplomatic relations have not yet been established between the mainland and the United States. Personnel exchanges between the two sides can basically be said to be in a relatively closed and isolated state.

Therefore, even if he quietly transferred the technology to others, there was no way that Milo Moreno would know the inside story.

After several years of accumulation and careful preparation, we can carry out in-depth research and development work on this basis.

By then, even if Milo Moreno had a keen eye, he would probably find it difficult to recognize that this technology originated from him.

"Excellent! In my opinion, this matter should be foolproof. I will contact my uncle immediately tonight."

You know, Milo Moreno's uncle is the undisputed major shareholder of that company, and Moreno Company is actually an industry controlled by their entire family.

Although Milo Moreno holds relatively few shares, he still has a certain degree of say within the company.

"Then I look forward to the good news you will bring."

After that, the two of them had a preliminary discussion and drew up a rough cooperation framework.

Immediately afterwards, He Yuzhu asked Milo Moreno to arrange for five lathes of different specifications to be delivered to his company in advance.

After everything was settled, the two of them slowly walked out of the store door.

He Yuzhu raised his wrist to glance at his watch, and saw that the hands had quietly pointed to almost afternoon tea time.

So, he drove straight to a quiet tea restaurant without hesitation.

Huang Zhirou, who was sitting in the passenger seat, saw this and asked suspiciously:

"Why don't you just go back to the company?"

However, in response to her question, He Yuzhu did not explain much, but just smiled and said:

"Just follow me, and you will know later."

After the car was parked steadily, He Yuzhu first took some trouble to go around to the other side, then gently pushed open the door, and very gentlemanly and politely reached out his hand to hold Huang Zhirou's hand, and carefully helped her get out of the car.

What is surprising is that from beginning to end, He Yuzhu never let go of that gentle little hand.

Huang Zhirou tried to pull her hand out of He Yuzhu's hand with a little effort, but failed.

Her fair cheeks instantly flushed, and she was led by He Yuzhu's hand into the elegant tea restaurant with a little shyness.

The two walked through the hall and went straight into a quiet private room.

After sitting down, surprisingly, He Yuzhu still held Huang Zhirou's soft and delicate little hand tightly and refused to let go.

When ordering, He Yuzhu asked softly:

"Honey, what would you like to eat?"

Huang Zhirou lowered her head slightly and said in a voice as soft as a mosquito:

"As for me...I just hope I won't be 'harassed' by you, my boss, anymore!"

After these words were spoken, not only did He Yuzhu feel a little embarrassed, but even the young waitress who had just pushed the door open couldn't help but smile secretly.

However, this well-trained waitress quickly suppressed her smile, forced herself to remain calm, and put on a serious look.

Seeing this, He Yuzhu coughed twice to hide his embarrassment, and then finally slowly let go of Huang Zhirou's little hand.

He took the exquisite menu handed over by the waitress and casually ordered a few exquisite pastries and a pot of fragrant black tea.

After ordering, he handed the menu to Huang Zhirou beside him.

Huang Zhirou first thanked him politely, and then looked through the menu carefully.

Soon, she ordered a few of her favorite dishes, expressed her gratitude to the waitress again, and returned the menu to her.

After the waitress left the room, Huang Zhirou raised her head and looked at He Yuzhu opposite her with a watery gaze, and asked curiously:

"Boss, why did you suddenly think of getting involved in the OEM business?"

Hearing this question, He Yuzhu smiled slightly and asked back:

“Is there anything wrong with being a contract manufacturer?”

Huang Zhirou pondered for a moment, then answered carefully:

"I don't think OEM is bad. I just haven't heard of this way of business before. And as far as I know, the profit that can be earned from purely OEM business is relatively not that high."

Indeed, it is true! This is not a particularly high level, but I know clearly that in the field of CNC machine tools, they already have a fairly mature technical system and a complete sales network. If I were to start from scratch and want to get involved in this business now, it would be extremely difficult!

Look at the moment, I haven’t even mastered the production technology of transistors, and I don’t even know who to buy them from.

Even if you are lucky enough to buy the relevant technology in time and successfully produce it, and then turn around to study CNC lathes, it will be too late and you will definitely be left far behind by other peers.

So, after much thought, it would be better to start with OEM. After all, in this way, we can naturally obtain the ready-made production technology from Milo Moreno's company.

Doing this can greatly reduce the time I spend on independent research and development in the early stages.

Wouldn't it be more efficient to digest and absorb their technology first and then use it as a foundation to launch innovative work?

I have thought this through very clearly! Next, I plan to present this technology to the senior leaders for review, and then try to get in touch with universities in the mainland and start cooperation.

Let those professionals work hard according to the research direction specified by He Yuzhu. Once there are results, we can immediately put them into practical application.

As long as we rely closely on the powerful scientific research capabilities of many mainland universities, we will naturally be able to continuously produce new technologies and thus remain invincible in the market competition!

There is no mistake in the poem, post, content, and read the book on 6, 9, and bar!

It's not just about CNC lathes. In fact, we can turn our attention to other types of home appliances such as radios and televisions, and carry out in-depth research!

He Yuzhu explained it to Huang Zhirou patiently and briefly, but he cleverly avoided matters related to the mainland.

Before this, Huang Zhirou had never thought so deeply. She was only thinking that the profits brought by OEM were not that high.

However, after listening to He Yuzhu's detailed explanation, she suddenly realized something:

"Oh my, this is a great way to acquire advanced technology!"

At this moment, the beautiful waitress brought over delicate pastries and fragrant black tea with a smile. Then, the two of them began to savor the delicious food leisurely and at the same time, they exchanged their unique insights and opinions on certain things.

After enjoying this wonderful afternoon tea time, the two returned to the company together.

What is surprising is that the five brand new CNC lathes have been successfully delivered to the company!

Then, the workers who provided on-site service completed the assembly of the lathes quickly and efficiently. One of the experienced technicians stayed behind and taught the workers in the company how to operate these advanced equipment correctly and skillfully.

Just like that, in the next two days, through continuous learning and practice as well as the careful guidance of technicians, many qualified operators emerged like mushrooms after rain.

During the whole process, even the knowledgeable He Yuzhu himself was amazed!

You know, in the past, parts like this had to be produced by workers with intermediate professional titles, but now ordinary front-line workers can easily operate them and successfully produce finished products!

I have to say that the significant advantages demonstrated by this CNC lathe are really amazing!

It saves the long time spent on worker training, and at the same time greatly improves work efficiency.

The most significant advantage of CNC lathes is that they can achieve high-efficiency mass production. Products are manufactured one after another, like an endless assembly line, which greatly saves precious time. Compared with traditional lathes, their efficiency has increased by 10 times or even more!

"Oh my, it turns out the speed can be so fast!"

He Yuzhu, who witnessed all this, couldn't help but widen his eyes, secretly regretting in his heart, and sighed how great it would be if he had known about and adopted this CNC lathe earlier.

After the technicians who came for training left one after another, He Yuzhu, who could not contain his curiosity, walked quickly to the CNC lathe and carefully disassembled the cover of the CNC center.

Inside, there are many printed circuit boards, which are closely arranged together and are densely covered with small and exquisite transistors.

You know, if such a seemingly ordinary lathe is sold in the Hong Kong market, the price is probably around a few thousand yuan;

However, once equipped with advanced transistor CNC technology, its price instantly soared to a staggering 15000 or even or Hong Kong dollars! In other words, just because of the addition of these transistor CNC devices, the added value of this lathe has reached more than yuan.

From this, it is not difficult to imagine how huge the profits involved are!

After a careful observation, He Yuzhu did not touch any parts rashly, but carefully resealed all the parts as they were.

Then he turned back to the office, quickly called Huang Zhirou, and said:

"Go get me 10 sets of radio accessories and a set of tools." He Yuzhu ordered Huang Zhirou.

Huang Zhirou looked up in surprise when she heard this, and asked with wide eyes, "Boss, what do you want these things for?"

He Yuzhu looked at her curious expression and asked with a smile, "What's the matter? Are you meddling in my affairs now?"

When Huang Zhirou was asked this, her face immediately turned red with shame and she said coquettishly, "Who...who cares about you!" After that, she turned around and hurriedly walked out of the office.

A few minutes later, Huang Zhirou came back with a big paper bag in her hand. She gently placed the paper bag on the desk beside her, then stood aside and looked at He Yuzhu quietly.

He Yuzhu opened the paper bag and took out a soldering iron, rosin solder, an insulating pad, a radio's printed circuit board, a large pile of transistor parts, etc.

It turned out that their company had a project of assembling radios before, and it had been ongoing, but before that, He Yuzhu had never done it himself.

However, today, He Yuzhu suddenly had a novel idea - he wanted to try and see if he could awaken some new skills by welding the radio himself?

As for Huang Zhirou, she was naturally completely confused. She had no idea what was wrong with her boss today that he would suddenly have the urge to tinker with something like welding a radio.

But since the boss had already spoken, she couldn't say anything more and could only watch silently from the side.

At this time, He Yuzhu was completely immersed in his own world.

He referred to the circuit diagram and carefully soldered each tiny transistor onto the printed circuit board.

After soldering the first radio and slightly debugging it, the expected system notification did not occur.

He Yuzhu was not discouraged and started to make the second radio. When the second radio was completed, a system message appeared in front of He Yuzhu.