Siheyuan starts from a good life

After the screw rod was installed in place, Jiang Yan rechecked the entire machine.

After turning the screw rod, Jiang Yan listened carefully and found that there was no noise coming from the screw rod.

Jiang Yan turned his head and gave a thumbs up to Sun Deshui who was helping beside him.

Next, things will be relatively simple. The remaining parts can be installed step by step according to the drawings you drew.

However, among them, perhaps only Jiang Yan himself was the most troubled.

He needs to carefully review the installation step by step according to the drawings to see if the optimal installation status is achieved. If not, he needs to review it again.

So today he was assisted by Shen Gong and two other engineers.

When encountering areas where the installation was not in place, several people stopped to discuss and brainstorm.

They changed the drawings to perfection, and during the discussion among several of them, a whole set of installation steps were discussed.

I wrote on many pieces of draft paper. As long as there was writing on the draft paper, Guo Jianjun collected them and stored them carefully.

Since the installation took too long, Director Zhao had already taken his secretary to handle other work. Before leaving, he specifically told Guo Jianjun to take good care of Jiang Yan, the others, and Minister Hong.

After more than three hours of installation, the entire fine segmentation machine has been completely assembled.

At this time, the fine segmentation machine has removed the stains and added many brand-new parts. It looks like a completely new machine.

"Engineers, co-workers, and Minister Hong, it's time for you to eat something."

Seeing that the fine segmentation machine had been assembled, Guo Jianjun hurried forward with a lunch box.

After hearing Guo Jianjun's words, Jiang Yan took out the watch he kept in his pocket while working and took a look at it.

It's already half past two in the afternoon, and I've been working for more than six hours since I didn't know it in the morning.

To be honest, I was really hungry when I stopped.

So Jiang Yan quickly called to other people who had stopped working to come over for dinner.

Jiang Yan took the aluminum lunch box handed over by Guo Jianjun, opened it and looked at it.

The lunch box is divided into two pieces, one side is vegetables and the other side is white rice.

The dish is mainly cabbage and potatoes, but there are a few pieces of brightly colored braised pork on top, which looks very appetizing.

"Gong Jiang, you just tested it, there's nothing wrong with it, right?" As soon as Jiang Yan took a mouthful of rice, Gong Shen brought the lunch box to him.

"There should be no problem. We'll just start it up and test it after we finish our meal. If there are any problems, we'll make improvements on site."

Jiang Yan swallowed the food in his mouth before speaking.

"Gong Jiang, do the installation steps we completed today need to be sorted out?" At this time, Wang Tianlai also approached Jiang Yan with a lunch box.

"I want to sort it out. These are first-hand information, which will be of great help to the installation or maintenance in the future."

"Then I'll sort them out later and show them to you."

When Jiang Yan heard Wang Tianlai's words, he looked up and found that this boy was a thief, but this was nothing to Jiang Yan.

"No problem. After sorting out the information, I will add your names and submit the report."

After finishing the meal, Jiang Yan drank a large glass of warm water, smoked a cigarette outside the workshop, and then walked into the workshop again.

People who were resting in the workshop stood up one after another when they saw Jiang Yan coming in, waiting for Jiang Yan's command.

"Old Sun, go get a seamless steel pipe."

"Wang Gong, prepare to record."

After arranging the people, Jiang Yan went to the fine section machine.

He skillfully connected the power supply to the fine segmenting machine and pressed the start button.

At this time, Sun Deshui handed the seamless steel pipe to the waiting lathe, and he skillfully put the seamless steel pipe into the fine segmenting machine.

Then he installed the corresponding tool on the tool holder. After testing the tool and adjusting it, under the eyes of everyone, he started the machine and started carving gun lines in the seamless steel pipe.

After a jarring sound, the lathe stopped the machine and took out the machined barrel.

He walked down with the gun barrel that had already been carved with lines inside, and handed it to Jiang Yan.

Jiang Yan picked up the tool to measure the internal thread of the gun barrel.

Seeing Jiang Yan testing, everyone's hearts were lifted.

Everyone in the workshop seemed to be breathing more cautiously, fearing that if they breathed louder it would affect the measurements.

"Excellent. Just a hint."

Everyone cheered when they heard Jiang Yan utter these two words, including Director Zhao who came over later.

What Jiang Yan said was correct, it represented the tolerance produced during the production process of parts. This tolerance value is already a very scary data for this current machine. This data is almost exactly the same as the tolerance of the new machine. This also means that Jiang Yan and the others have completely repaired this fine segment machine.

"Master, how did you feel when you started the machine just now?"

After hearing Jiang Yan's question, the lathe worker recalled it carefully.

“The control of the fine segmenting machine is very sensitive, especially when turning the tool and pushing and pulling the screw rod, there is no stagnation.”

After hearing what he said, Jiang Yan nodded with satisfaction.

"Have the drawings been sorted out?" Jiang Yan turned around and asked Guo Jianjun who was following him.

"It's sorted. All the drawings are here with me. As long as they are papers with words on them, I will collect them and send special people to take care of them."

The drawings are the most important thing. With these drawings and the installation steps discussed by Jiang Yan and the others, it can be said that they can produce this precision segmenting machine as long as they want.

This is good news for the current country.

"Congratulations to Mr. Jiang. On behalf of all the employees of Factory 663, I would like to thank you."

At this time, Director Zhao walked up to Jiang Yan, took Jiang Yan's hands and shook them vigorously.

"Thank you, Director Zhao, but Shen Gong and the others also played a role, as well as these workers. Without them, we wouldn't have been able to complete it."

At this time, Jiang Yan felt full of satisfaction, the same feeling he felt every time he came up with something new.

how to say! I just feel that I have contributed to the rise of the flower-growing family.

This kind of full mood is the kind that nothing can bring about.

The cheers of the surrounding workers have now become a wonderful note.

The machine was successfully repaired and renovated, and there are many things to follow, but these should be handled by Director Zhao. To be honest, the high-intensity work is very tiring. Now Jiang Yan's only thought is to have a good sleep. .

After Jiang Yan handed the complete set of drawings to Director Zhao along with the installation records made by several of them, he declined his invitation to Jiang Yan to attend the celebration banquet.

Of course, Jiang Yan also told Director Zhao the reason why he did not attend the celebration banquet.

As a good man, Guo Jianjun naturally couldn't see Jiang Yan hungry. While escorting him back and passing by the supply and marketing cooperative, he bought a lot of things for Jiang Yan.

After returning to the hotel, Jiang Yan took a comfortable hot bath in the space, then lay on the bed and fell asleep deeply.