Siheyuan starts from a good life

During the disassembly process, Jiang Yan quickly discovered the problem of damage to the equipment.

In fact, this problem is not worth mentioning to put it bluntly, that is, because metal chips entered the inside of the machine, the gears in the machine were worn until missing teeth appeared, and it also caused the other two parts to also be different. The extensive damage eventually caused the device to collapse.

The missing tooth part was not only seen by Jiang Yan, but also by the experts who were watching Jiang Yan dismantle the machine. However, in order to remove this part, the machine must be disassembled to the end.

It was not until the end that only the bottom case and a few parts were left, and the missing tooth part was removed. In the process, they discovered two other misaligned and damaged parts. .

These three parts quickly arrived at Leader Zheng.

"Here, Lao Huang, can we do this?" Leader Zheng asked Lao Huang next to him.

"It's not a big problem. We have several seventh-level and eighth-level workers. As long as we have the drawings, we can make one by hand." Lao Huang said confidently.

Drawing, in an environment where everyone is a boss, is a piece of cake for Zhang Fei to eat bean sprouts. Soon, three experts drew the drawings of these three parts for their colleagues and got them to Leader Zheng.

After dismantling it, Jiang Yan found a stool and sat there to rest.

As long as Jiang Yan is given the tools and materials, he can process these three parts very quickly. However, he has been in too much limelight today, so he has to leave a chance for others to perform, okay? Well, eating alone is the most annoying thing. Thinking of this, Jiang Yan stopped participating.

But I was so busy with work just now that I didn't even bother to eat lunch. As we all know, once people are engrossed in their work, they sometimes forget to be hungry.

After relaxing first, Jiang Yan felt a little hungry. He looked at his watch and found that it was already past two o'clock in the afternoon. This meant that he had been working for several hours, and it was all physical work. Otherwise, how could this happen? Hungry.

But he couldn't eat yet. A large group of people gathered around Jiang Yan to ask him how he discovered the problem. As a last resort, Jiang Yan told him how he discovered the problem again, followed by various questions.

To be honest, Jiang Yan didn't want to deal with these experts because the questions they raised were too sharp. Jiang Yan had to think about it himself before he could answer it. Being with them was a waste of brain cells.

After all the problems were solved, many people's stomachs began to growl.

Seeing this, Leader Zheng hurriedly greeted everyone: "Comrades, I'm really sorry. I was so preoccupied with work just now that I forgot to ask everyone to eat. I'm really sorry. We have prepared meals for everyone. Everyone should go and eat quickly."

With the drawings, other people will naturally do the processing of the parts. The equipment has been disassembled and the problems have been identified. Now we are waiting for the new parts to be reprocessed and installed. At this point, everyone feels relieved. , were all starving, so they walked in twos and threes, led by the staff, to the canteen.

An expert who was supposed to go to dinner with everyone found Leader Zheng and said that he would be responsible for processing these three parts immediately.

The staff around Leader Zheng introduced the identity of this middle-aged man to Leader Zheng. The middle-aged man who stopped Leader Zheng and asked him to immediately process and make parts was named Liu Wei. Like Jiang Yan, he was from the First Machinery Department, but he was an eighth-level engineer who was converted from an eighth-level worker. In terms of hands-on ability, I guess everyone here except Jiang Yan is really not as good as him.

Leader Zheng expressed his appreciation for Liu Wei's work attitude of volunteering, taking responsibility, and forgetting to eat and sleep. But at the same time, he also said, "There is work to be done, but you also have to eat. Even if you have to work, it will not take more than half a minute." of".

After agreeing to his request, he was pulled into the small canteen. In the small canteen, Liu Wei devoured a few mouthfuls of rice and then hurriedly went to process and make parts.

To process and make new parts, you definitely need corresponding tools and materials. They have these in their base, and even if they don't have them, they can quickly transfer them. This is not a difficult thing for them at all.

Because everyone still had important work to do in the afternoon, there was no wine or anything. However, the food in this small canteen was very rich, and many people were quite happy with it. Jiang Yan also ate three large steamed buns. .

After eating, Comrade Liu Wei estimated in advance that it would take about three hours to process those parts. Therefore, the base specially arranged a room for them to drink tea and take a rest.

Jiang Yan also took this opportunity to come outside the lounge, took out a cigarette from his pocket, lit it, and took a nice puff.

"Comrade Jiang Yan, it's not convenient for us to talk." Jiang Yan, who was smoking, turned around and saw Lao Huang standing behind him.

"I don't know Mr. Huang, do you have any advice?" Jiang Yan casually handed Lao Huang a cigarette and spoke.

"I don't want to take advice seriously, so I just want to ask you for advice." Old Huang took the cigarette handed over by Jiang Yan and spoke.

"Comrade Jiang Yan, since you have a photographic memory, it shouldn't be difficult to assemble it after a while. What I'm thinking about is whether you can use your expertise to reverse engineer this piece of equipment like you did before. come out."

"I know that the amount of reverse imitation work is huge, but there is currently a considerable shortage of such high-precision machines in China. You also know that our external conditions are not good now, and the purchasing channels are limited. Such high-precision machines, There are only a few machines in the entire country, and these are the machines we sacrificed many comrades for." When Lao Huang said this, his eyes were slightly red.

Hearing this, Jiang Yan was silent for a moment. He was no stranger to this machine. It was said to be a reverse imitation. For Jiang Yan, it was just a drawing of the picture in his mind. However, the workload was so heavy that it was not two days a day. It can be completed in a day. Even if you ensure that you have a large number of manpower, it will take at least a week to draw the drawings.

And his wife was just pregnant. One was for everyone and the other was for Xiaojia. Jiang Yan was a little hard to choose for a while. After thinking about it, Jiang Yan decided to help. After all, where would Xiaojia come from without everyone.

Jiang Yan was silent for a moment, then said directly: "If we want to imitate this precision equipment, although many of the parts inside can be made by hand, you will have to find a way to provide some raw materials and some electrical parts. "

Jiang Yan's request was based on reality. It didn't mean that everything would be fine if he had the skills. Some raw materials and parts could not be made by hand simply if you had the skills.

When they imitated the equipment of the Hans Kingdom in Bingcheng, they mobilized a large number of other experts. Some parts and metals were even ordered directly from Mao Xiong. Even so, it took nearly a year to complete.