Siheyuan starts from a good life

At five o'clock in the afternoon, the staff came to Jiang Yan and told him that the required parts had been produced. Jiang Yan glanced at his watch subconsciously. At this time, less than three hours had passed since he had completed the disassembly. .

"Comrade Jiang Yan, the new parts have been processed. The leader asked me to call you over to see if the parts produced are suitable." At five o'clock in the afternoon, the staff came to Jiang Yan and told Jiang Yan that the required parts Parts are already produced.

"Okay, I'll be there right away." After Jiang Yan nodded, Jiang Yan glanced at his watch subconsciously. At this time, less than three hours had passed since he had completed the disassembly. Then I followed the staff of the institute to assemble the machine.

After Jiang Yan got the new part, he took a look at it, then touched it with his hand. The part was processed very smoothly and no burrs were felt. He measured it with a vernier caliper and nodded. "Well, yes, the tolerances are within the acceptable range."

"It seems that Liu Gong, who took the initiative to take on the processing task, does have two brushes on hand."

Due to the high accuracy requirements, all current domestic machines may not be able to process such precision. They can only roughly process a blank, and the rest can only be processed by seventh-level or eighth-level workers bit by bit manually. This level is also quite powerful.

With everything ready, Jiang Yan was ready to start assembling this precision equipment.

At this time, leaders Lao Huang and Zheng also came back from Minister Lu and rushed to the scene, so Lao Huang directly said: "Comrade Jiang Yan, I suggest you take a look back before assembling this precision equipment. Video taken while disassembling the equipment."

Lao Huang felt that even if Jiang Yan had a photographic memory, at least four or five hours had passed from the beginning of disassembly to the beginning of assembly. Some of his memories were not very accurate. Looking back at the video of the disassembly, it was unclear. It can deepen the impression and avoid making mistakes later during assembly.

However, after Jiang Yan glanced at Old Huang with a half-smile, he decisively rejected the proposal.

It's already five o'clock now. If you watch the replay again, two or three hours have passed from the time you prepare for the screening to the time you finish watching it. If they wait to assemble the machine after watching the replay, it will probably take a few more hours. It will delay things too much. As for their worries, they don't exist at all with Jiang Yan!

"You don't have to look anymore. I clearly remember every step and part when disassembling this equipment. Just start." Jiang Yan spoke confidently.

Since Jiang Yan was so sure, Lao Huang didn't say anything anymore, and used his eyes to signal Leader Zheng, who was just about to speak, to wait for the development of the situation.

However, people who came to see how to assemble it felt that "Jiang Yan is a bit too conceited. If there is any problem during the assembly process, let's see how Jiang Yan comes to Taiwan."

However, this professional who wants to see Jiang Yan's jokes will probably be disappointed.

Just as Jiang Yan said, he was deeply impressed by the structure of this precision equipment, the various parts inside, the laid out installation steps, and even the detailed data of various parts. in mind.

Therefore, there is no sloppiness in assembly.

"So fast!"

"If you assemble it so quickly, can you guarantee the correctness of the assembly?"

Seeing that Jiang Yan's assembly speed was too smooth and fast, some people couldn't help but worry. At the same time, leaders Lao Huang and Zheng who were watching him assemble the machine were pleasantly surprised. The two looked at each other as if everything was gone. Hit the mark.

Although Jiang Yan had been assembling it smoothly, it was a relatively sophisticated machine and equipment after all. It took Jiang Yan longer to complete the assembly than it took him to disassemble it. Sometimes Jiang Yan even had to stop and think. Every time he stopped, everyone at the scene didn't dare to express his anger.

Because it took too long, it was naturally a little slower at the beginning. However, as the assembly became faster and faster, Jiang Yan's speed gradually stopped, so that what was slowing down Jiang Yan's speed now was not Jiang Yan itself, but the parts that are labeled, individually bagged or boxed.

Jiang Yan followed the order in reverse order. Every time he received a part, for the sake of safety, he would first look at the label on the bag or box containing the parts, then look at the parts in the bag, and then start assembling.

It's like the chief surgeon in the operating room, when receiving the surgical tools handed by his assistant, he has to check whether they are handed to the wrong ones.

After all, it's not like mistakes have never happened before, especially as the speed increases, the chance of such mistakes increases. As a result, Jiang Yan discovered several times that the parts handed over by the assistants had different time numbers.

In order to reduce the chance of making mistakes while busy, Jiang Yan did not let them take the parts out of the bag or box, but handed them to him directly. After he confirmed that the parts were correct, he took out the parts to assemble, and there was an extra Although such steps had little impact on Jiang Yan's smoothness of assembly, the corresponding time did increase.

However, the person next to him who recorded Jiang Yan's assembly sequence was a little panicked. Sometimes the two parts were too similar. If he didn't pay attention to this one, he wouldn't know which one was which. But fortunately, Jiang Yan was videotaping the whole process from the beginning of the assembly. , the master who had time to record the video would also remind Jiang Yan to slow down a little.

"Okay!" Finally, after three hours of continuous hard work, Jiang Yan finished assembling the machine. Looking at the assembled machine, Jiang Yan breathed a sigh of relief.

"My hands are raw. If I assemble it a few times, my speed will at least double."

After assembly, the next step was to test the machine. Seeing that Jiang Yan had finished assembling it, Old Huang immediately called out to the relevant staff: "Xiao Wang, Xiao Li, you two organize people to bring this equipment to the computer room. Go, be sure to pay attention to safety during transportation."

After saying that, Lao Huang turned to Jiang Yan and said, "Comrade Jiang Yan, you will come with me later."

"Okay," Jiang Yan nodded and replied.

Since the computer room where this precision equipment was placed was confidential, no one from outside the research institute was allowed to follow him in except Jiang Yan.

And letting Jiang Yan follow him in was because Jiang Yan had the highest level of confidentiality among the professionals who came to repair it. And Jiang Yan is the main force in dismantling, assembling and repairing this machine and equipment. He asked Jiang Yan to follow him because he was afraid that there would be an emergency soon and Jiang Yan could deal with it in time.

The professionals in the maintenance room were talking a lot.

"I wonder what the final result of the test machine will be?"

"It's hard to say."

“There’s nothing to say about disassembling and finding out the problems, but there’s no guarantee that the final assembly will be correct.”

The discussion in the workshop was quite intense, and some comrades even directly picked up the notebook recorded by the recorder and read it.

About half an hour later, Leader Zheng took Jiang Yan back to the maintenance room with a smile on his face.

"Comrades, after testing, the equipment is operating normally."

"Congratulations to everyone for successfully completing this equipment maintenance work. Thank you everyone for your hard work!"

After speaking, Leader Zheng held Jiang Yan's hand again and said:

"Thank you, thank you Comrade Jiang Yan!"

Jiang Yan replied politely: "Boss, you are so polite. You have thanked me several times. This is what I should do."

Leader Zheng had indeed thanked Jiang Yan several times. When the equipment in the equipment room was running normally, he thanked Jiang Yan excitedly.