Siheyuan: He Yuzhu's rebirth in the 21st century

Jia Dongxu has just been promoted to level 4 fitter.

He was just about to kick his master Yi Zhonghai away and go out to repair the equipment alone to show his performance.

But I have always suffered from lack of opportunities.

Normally, when there are maintenance tasks, it is not his turn as a level 4 worker.

It just so happened that all the senior workers went to a meeting today, and the other mid-level workers all kept their heads down.

"If you don't show your ability now, when will you?!"

He hurried forward and said:

"If they don't dare to repair it, I will do it!"

"You? Master Jia, you just became a Level 4 worker, right?"

Da Niu, a level six operator in the hot rolling workshop, looked him up and down.

Jia Dongxu felt doubted and said indignantly:

"Why can't I?!"

"My master is Yi Zhonghai, a seventh-level fitter, and we live next door to each other. He taught me all the repair techniques!"

"Forehead……"

Seeing how confident he was, Daniu hesitated for a moment before agreeing.

"Okay! Then come with me to take a look!"

"Remember, don't try to be too stubborn. You are still young. It's not shameful if you can't fix it!"

After all, several level six workers in the hot rolling workshop couldn’t repair it.

Daniu didn't believe that a fourth-level fitter could fix it.

Let’s treat a dead horse as a living horse doctor!

However, the words "Don't be so stubborn", coupled with the mocking looks from other intermediate fitters, deeply irritated Jia Dongxu.

"Humph! Just wait! I swear to fix the rolling mill!"

"I want to make you cowards who look down on me look at me in a new light!"

He picked up his tools and angrily walked towards the hot rolling workshop, completely forgetting that he was just a beginner...

When he walked to the hot rolling workshop and saw the three-meter-high rolling mill, his mind came to its senses.

"Is this something I can fix?"

What can he do?

I had no choice but to check the rolling mill's base, frame, adjustment device, transmission device, etc.!

Twenty minutes later, Jia Dongxu didn't find any problems, but he started sweating!

Several level 6 workers in the hot rolling workshop were pointing and talking.

"How funny! We, several level 6 workers, couldn't find the problem, so what's the point of a level 4 worker showing off?"

"That's right. He checked those places. We have already checked them. Why do we need him? I guess there must be something wrong with the rolling mill."

"That's enough. Jia Dongxu has just been promoted to a fourth-level worker. It's understandable that he can't repair it properly because of his poor skills. He's better than those fitters who don't dare to come!"

"Just being promoted to a Level 4 worker is so great? He doesn't have to come! No one is forcing him to come!"

"..."

The sound was not loud, but Jia Dongxu could hear it clearly!

"Damn it! Do you look down on me?"

"You said there was something wrong with the rolling mill? I won't go!"

He seized the opportunity and climbed up by clinging to the frame of the rolling mill...

By the time everyone in the hot rolling workshop discovered him, he had quickly climbed to the top of the rolling mill.

"No! Jia Dongxu, what are you doing climbing on top of the rolling mill!?"

"If the rolling mill doesn't turn, then it's not the problem above! If not, wait for your master to come and fix it!"

"Get down quickly, there's oil on it and it's very slippery, don't fall!"

"..."

Everyone was shocked and hurriedly asked him to come down.

Jia Dongxu stood on the rolling mill, looking at the "inferior" people, and suddenly felt full of pride!

You guys are the ones saying that my skills are not good enough?

You look down on me because I'm a Level 4 worker! ?

And you want my master to come and repair it?

See how I found the problem with the rolling mill...

"Hiss Liu~"

"what!!"

Jia Dongxu suddenly slipped and lost his balance, then he fell headfirst off the rolling mill!

After a muffled "bang", his body fell violently to the ground, twitched a few times and then stopped moving!

Everyone in the hot rolling mill!!!

"Hurry up and save him! Where did Jia Dongxu fall?"

"I don't know! The rolling mill is in the way!"

"Send to the infirmary!"

……

There are usually bumps and bruises in steel rolling mills, and most injuries are sprains.

More serious cases include crush injuries, cuts, bruises, broken arms and legs, etc., and cerebral hemorrhage is rarely seen in a year.

So the doctors in the clinic have no experience in this area.

They saw that Jia Dongxu had no obvious external injuries, but was unconscious.

He asked the people in the hot rolling workshop to lay him flat on the bed, give him an IV and observe him.

This observation is very troublesome!

If Jia Dongxu had been sent to Union Hospital earlier, he might have been saved.

But if you waste this time, you will almost die!

When Director Qiu of the medical office examined Jia Dongxu again, he found that his pupils were dilated and his limbs were weak!

"This is a symptom of cerebral hemorrhage!"

He was so scared that he ran all the way to the factory director's office.

……

Director Yang had just finished the mobilization meeting and then took the chief engineer and several deputy directors to his office for a small meeting.

"Everyone, I have full confidence in this military mission!"

"If we can accomplish this task well, I believe the steel mill will be able to rise to the top again..."

"duang! duang! duang!"

Unexpectedly, before he could finish his words, there was a loud knock on the office door!

The knocker, Daniu, did not wait for a response from inside the house, but hurriedly opened the door and shouted:

"Director, something bad has happened! The largest rolling mill in the hot rolling workshop has broken down!"

"What!? The rolling mill broke down? The biggest one!?"

"Then send someone to fix it quickly!"

Director Yang was shocked when he heard this!

A failure in the rolling mill will inevitably affect production. Isn't that asking for my life?

"Three engineers and two eighth-level fitters have already gone to repair it..."

"Phew~ That's good!"

Director Yang took a deep breath. He had confidence in the senior workers and thought there shouldn't be any major problems!

"But... they didn't find out what was wrong with the mill?"

Director Yang!!!

Can you please stop breathing heavily when you talk?!

"Factory Director, something bad has happened! Jia Dongxu from the fitter workshop has suffered a cerebral hemorrhage from a fall, and he is dying!"

Suddenly, Director Qiu from the infirmary arrived, panting.

"No! Who is Jia Dongxu? What is he doing there?"

Deputy Director Li was also very anxious!

If production is delayed, then he, the deputy factory director in charge of logistics and maintenance, will definitely be in trouble!

"Jia Dongxu accidentally fell down when he was repairing the rolling mill..."

Daniel added a sentence at the right time.

Director Yang...

Deputy Director Li...

tired! Destroy it!

"Director Qiu, please use my bus to take Jia Dongxu to Union Hospital for treatment. Don't delay!"

"Chief Engineer, go and notify all the engineers and technicians in the factory."

"Lao Li, go to the fitter's workshop and notify all the seventh and eighth level fitters."

"Tell them to go to the hot rolling workshop immediately and repair the rolling mill in the shortest possible time. Production must not be delayed!"

"Otherwise we'll be in big trouble!!"

……

On his way back to the cafeteria from the infirmary, He Yuzhu noticed that the atmosphere was a little strange.

Groups of senior workers went to the hot rolling workshop with serious expressions.

"Have you heard? The hot rolling mill in the hot rolling workshop broke down and stopped working. Two level 8 fitters in our workshop worked together but couldn't find the cause of the problem!"

"If two masters with such good skills can't do this, what are we going to do?"

"It's just to make up the numbers, but if we can fix it, we will definitely get promoted and make a fortune!"

……

He Yuzhu didn't take these words seriously at all.

The damage to the rolling mill had nothing to do with him, he just had to cook well...

"Wait! Is the rolling mill in the hot rolling workshop damaged?!"

……