Siheyuan Back to the 1950s

"You three, please ride slowly on the road."

At the entrance of the research institute, Sun Zhengguo, sitting in the car, explained everything again to Chen Lianshan and the other two.

"Thank you for your concern, Director. We will pay attention to it. See you tomorrow."

"Director, please slow down too. See you tomorrow."

"Goodbye, Chief."

……

Only after watching the three people's backs going away did Sun Zhengguo wave his hand and signal his cousin to drive home...

The next day, the assembly work continued and there were some problems, big and small, but with Sun Zhengguo present, all problems were solved.

When it was time to get off work in the evening, the workers worked overtime again.

As expected yesterday, the assembly of the rolling mill has been basically completed, and all that remains is debugging and testing.

When Director Gao saw the machine taking shape, he felt both happy and nervous.

"Director Sun, is this all right?"

"What else? Call it a day and do the final adjustments tomorrow."

Seeing how simple Sun Zhengguo's statement was, Director Gao had no choice but to pray.

Time soon came to the third day, the electricians came in and started connecting the lines, while the technicians were conducting the final inspection.

"Director Sun, the line has been successfully connected, everything is normal."

"Director, the rolling mill has been inspected and everything is normal."

As Zhao Guoping and Chen Lianshan reported one after another, Sun Zhengguo also took it seriously and his expression became quite serious.

"Director Gao, please arrange for skilled workers to come in so we can test the machine first."

"Okay, I'll arrange it right away."

Director Gao was like a little follower at this moment, happily running around to get people to do their bidding without any complaints.

Soon, several skilled workers came in, and the technicians communicated with them again and informed them of some precautions...

At 9:30 in the morning, everything was ready and Sun Zhengguo issued the order for the trial run.

"I declare, turn on the machine."

Following the order, the worker pressed the button without hesitation, and the heating furnace device started in the first step.

Because the heating furnace device did not change much, there were no problems in its operation.

The next step is to start the rolling device. This step is the most important one. It can be said that the soul of the entire machine is concentrated here.

Whether the rolling mill can be successfully developed this time depends on whether this step can be operated.

Director Gao didn't dare to look at it now, his palms were sweating with nervousness.

But as the highest leader in the factory, he had to remain calm and not show any fear, otherwise how would the workers view him?

"Buzz~!"

As the rolling device started, the machine began to run slowly, and gradually the speed became faster and faster...

At this moment, there was a sudden creaking sound, and the worker was quick to press the stop button.

The atmosphere at the scene froze and no one dared to make a sound.

Director Gao felt like the sky was falling, and the worst result really happened.

However, Sun Zhengguo did not panic and continued to give orders calmly.

"Chen Lianshan, Zhao Guoping, the two of you should check quickly to see what's wrong."

"Yes."

After receiving the order, the two men hurried forward and began to troubleshoot the problem.

Twenty minutes later, Chen Lianshan came over and began to report the cause of the failure.

"Director, the cause has been found. One set of pulleys had improper clearance adjustment, which caused the belt to break. It has been replaced and readjusted."

"Well! Don't worry, you must check it carefully to avoid such low-level mistakes."

"I understand, Director." Chen Lianshan felt a little embarrassed.

Because the pulley part just now was the area he was responsible for, and it was indeed a low-level mistake.

……

This little incident did not affect Sun Zhengguo's mood at all, and the replacement continued...

After a while, the belt was replaced and Sun Zhengguo signaled to start the machine again.

This time the machine worked very well and there were no problems. After running for ten minutes, Sun Zhengguo decisively ordered to open the conveyor and then the cooling device...

Seeing that all the machines were running without any accidents, Director Gao finally let go of his worries and took the lead in applauding.

"Bah bang bang...!"

After a round of applause, Director Gao, with a flushed face, walked forward and asked.

"Director Sun, is this considered a success?"

"Director Gao, it's not that easy. Being able to start the machine means half of the success. We also need production data to compare. Otherwise, how can we prove whether it is successful or not?"

"Yes, yes, I was too impatient. What should we do next?" Gao Changchang asked again.

"It's very simple. Report to the leader and see what he says. Then we will arrange the next step."

"Yes, yes! I'll go right away." With that, Director Gao walked out quickly, ready to report to his leader.

Sun Zhengguo was not in the mood to care about these things. He was still paying attention to the operation of the machine to ensure that the whole process was foolproof.

I don’t know how much time had passed before Director Gao came to the workshop again.

"Director Sun, I have just reported to the department leader, and the leader said he will come to inspect tomorrow. So what are our next arrangements?"

"It's the same as always. We have plenty of time now. Let's debug the machine today and try to get it working tomorrow."

"Okay, then I'll trouble Director Sun to take care of it."

……

The machine was still running. Another hour passed in the blink of an eye. Seeing that it was running well, Sun Zhengguo ordered to shut down the machine.

"Zhao Guoping, Chen Lianshan, quickly check the wear and tear of the important parts of the machine and the connection of other parts."

"Good director."

……

In this way, we were busy until almost 12 noon. After various inspections, we found that there were no major problems with the entire machine.

Some minor problems can be left to Zhao Guoping to deal with.

After finishing the work with the machines, Director Gao invited Sun Zhengguo and his team into the canteen.

Needless to say, the lunch arrangement was very rich, the chef's cooking skills were also very good, and the group was very satisfied with the meal.

After dinner, there was nothing to do, so Sun Zhengguo prepared to return to the research institute.

"Guoping, please work hard this afternoon and check and maintain the rolling mill. We will go back to the research institute first and come back tomorrow morning."

"Don't worry! Director, leave everything to me."

"Ok!"

……

Then, Sun Zhengguo said hello to Director Gao before taking Chen Lianshan and the technicians back to the research institute.

Sun Zhengguo had not been back to the institute for two days. As soon as he came back, he started to busy himself with documents, and then went to the laboratory to start paying off his debts.

Seeing that Sun Zhengguo had finally come here, Chen Wanchun certainly wouldn't be polite.

He handed over all the difficult problems that had accumulated over a long period of time to Sun Zhengguo.

At the same time, he also put it in a nice way, saying that those who are capable should do more work, which made Sun Zhengguo so angry that he couldn't help but complain.

"Old Chen, I just realized today that you have the potential to be a profiteer. This is the result of exploiting the working people."

But Chen Wanchun didn't care at all. No matter what you say, the debt must be repaid!

……