Rebirth 79, starting from making my ex-wife regret

Based on the relevant principles of the Star-Spangled Empire's 8080 processor, the first eight-bit processor of the Xia Kingdom was imitated.

There are no relevant patent laws and regulations in the country, and various technologies can be shared.

Not long after, the Yanjing Radio Factory obtained a full set of technical information from the Shanghai Radio Factory through coordination with the ministry, and also had the ability to produce 8080 processors.

"The computing power of the 8080 processor is sufficient to support our research on four-axis CNC machine tools."

"If there is still room for improvement, I can try to import some electronic components from abroad through my overseas connections."

After hearing this, Liang Fendou once again looked at Fang Lin with admiration.

Only industry insiders knew about the successful imitation of 8080 processor technology, and it was limited to several major domestic radio companies.

Speaking of this processor, Liang Fendou, who is usually calm in the face of adversity, is also excited.

In the mid-6000s, a high-tech company in the United States launched an eight-bit processor that could accommodate transistors.

And in the field of transistor permutations and combinations, remarkable results have been achieved.

Five years later, Xiaguo Enterprise successfully produced a similar product to the 8080 processor through imitation.

Fang Lin bent down to operate the drawing software and began to introduce his general ideas.

The more Liang Fendou looked, the weirder his expression became.

What a great Fang Lin!

A large amount of program compilation work for the four-axis machining center was completed through advanced Western computers.

Liang Fendou insists that research on high-end CNC machine tools should first understand the machine tool's programs and control systems, rather than being busy analyzing the manufacturing principles of CNC machine tools.

The principles are similar, but the difficulty lies in how to conquer the computer language program.

Fang Lin asked with a smile: "Engineer Liang, have you ever been to Little Sakura for a technical inspection as part of a group?"

Liang Fendou looked at Fang Lin again with hesitation and said, "Did Wu Shengli tell you that? I think Wu Shengli should stop being a factory director and become a matchmaker instead. His mouth is looser than his belt."

Without waiting for Fang Lin to answer, Liang Fendou scolded Wu Shengli for not being able to keep his words secret.

As the factory director, he tells everything, regardless of whether it is confidential or not.

"Liang Gong, please don't blame Director Wu. I heard it from others."

"You followed the relevant technical experts and the leaders of the First and Fourth Ministries of Machine Building to conduct an overseas inspection. I think it was probably because of this inspection that you came to the idea that it would be difficult for our country to have a four-axis machining center in the short term?"

"Alas, the gap is too big."

Liang Fendou wiped his face and asked Fang Lin to go to the coffee table and get his cigarettes and matches.

Lighting a cigarette, Liang Fendou took a slow puff.

"Back then, I and a large group of young scientific research backbones solved the problem of CNC machine tools from 0 to 1 for the country. When we manufactured the first domestic CNC machine tool, Sakura, separated from us by a sea, had not even figured out the theory of CNC machine tools."

"Later, due to some special historical events, our country's CNC machine tool research fell into a trough for about ten years. In the early 1970s, I followed the ministry's inspection team to Xiaoyinghua for an inspection. That inspection was simply unbearable to look back on."

Going to Xiaoyinghua for an industrial machine tool technology inspection was Liang Fendou's first time going abroad, and also the first time that Liang Fendou experienced unprecedented frustration.

since.

Liang Fendou and CNC machine tool researchers have always believed that China's CNC machine tool technology lags only behind the United States and some developed European countries.

As for several more developed countries next to Xia Country, they have always been surpassed by Xia Country in the field of CNC machine tools.

I never expected that reality would be so cruel.

Accompanied by relevant departments of Sakura, the group visited a large number of production companies.

On the last day, everyone visited a CNC machine tool laboratory.

Sakura's CNC machine tool capabilities are almost the same as Western technology.

Abandoned the traditional punch-hole computer programming method, processor computer program assembly was adopted.

The software programs used are still the same as those in the West.

All of a sudden.

Liang Fendou's inner pride collapsed.

Xia's CNC machine tool technology was constantly being left far behind by the West.

Even in Sakura, which is separated by a sea, their CNC machine tools are much better than Xia Guo's.

"Engineer Liang, it is precisely because of the gap that we have to catch up. This is not possible, that is not possible. Technological breakthroughs will never fall from the sky by themselves."

Fang Lin said slowly: "The development of multi-axis CNC machine tools requires the cooperation of a large number of technicians, and also requires the mastery of a complete set of semiconductor, computer and other related technologies. But we can complete from 0 to 1, so can't we do from 1 to 2?"

"Boy, you don't need to tell me inspiring words. No matter how many slogans you shout in front of technology..."

Before he could finish his words, Liang Fendou's eyes were immediately attracted by the content on the screen.

Pushing away Fang Lin's hand that was operating the keyboard, Liang Fendou said in disbelief: "Is this a technique you got, or did you complete it yourself?"

The computer screen displays the control system program of the four-axis CNC machine tool.

Experts look at the details, while laymen just watch the excitement.

Liang Fendou recognized at a glance the infinite value of this control program.

There are many programs that affect the performance of machine tools. The control program, also known as the control system, is one of the most important core components.

The more perfect and comprehensive the control program is, the greater the performance of the CNC machine tool will be.

Fang Lin said, "Mr. Liang, do you think the Westerners will leak the control program of the four-axis CNC machine tool?"

"OMG!!!"

Liang Fendou stood up suddenly and said incredulously, "Did you really write it yourself? How do you know so much?"

"After experiencing more failures, you will gradually reach the threshold of success."

Fang Lin calmly changed the subject.

In addition to the control program, Fang Lin also wrote a Chinese program font library for the four-axis CNC machine tool.

The most advanced electronic computers can accomplish all the tasks that punching computers cannot accomplish.

"Oh my God, is there really an absolute genius in the world?"

A few minutes later, Liang Fendou called his wife and immediately got him some quick-acting heart pills.

If you don’t take medicine, your life will be in danger!

From top to bottom, from left to right, Liang Fendou looked at Fang Lin carefully.

How can a young man in his twenties know so much about machine tool programs?

When it comes to independent research and development, Liang Fendou just doesn't believe it.

If analyzed from other perspectives, Liang Fendou had no clue at all.

Four-axis machine tools and five-axis machine tools are all regarded as strategically controlled commodities by the West.

Not to mention the programs inside, even the slightest content related to high-end processing centers is impossible for Westerners to leak.

Not only will there be no leakage, but exported machine tools will also be subject to strict technical control.

A locking system is installed internally and personnel are sent to regularly check the use of the machine tools.