King of Industry

Chapter 720 Ready to Go

In the office, everyone breathed a sigh of relief seeing Zhao Guoyang came back.

Only Zhuang Zhiyuan was full of sincerity and fear, not daring to say a word.

Zhao Guoyang didn't talk too much with this guy who couldn't see the situation clearly, and said directly: I heard what Lao Zhuang said just now...Since everyone has his own ambition, I won't force it. You can go directly to the financial department to settle the settlement tomorrow. Salary, just find another higher one.”

In addition, you have made some contributions to the factory over the years. I will greet the financial department and let them consider it as appropriate.

After finishing speaking, Zhao Guoyang pointed his hand out of the office, and never looked at the other party again.

Under everyone's regretful eyes, Zhuang Zhiyuan blushed, muttered a few words, and finally walked out of the office.

After resolutely handling this episode, Zhao Guoyang looked at the big guy without blinking an eye and said: Okay, let's not be disturbed by some trivial matters, let's focus on the design of this 'small excavator' .”

He shrugged his shoulders with a half-smile and said, We're definitely going to do this project. I don't want to be poked in the back by others saying that that young guy is messing around in the factory and making everyone jealous...

Zhao Guoyang's relaxed tone made the atmosphere in the meeting room relaxed.

When it came to business, Liu Yan who made a mistake, like a child who made a mistake, held the design drawing in her hand and explained the whole story to Zhao Guoyang.

Mr. Zhao, the rotary joint and slewing support I designed have no major data problems. The local damage characteristic frequency of the outer ring and inner ring of the slewing ring has also been adjusted to a suitable range according to your statement.

But I don't know why, the two numbers calculated separately match, but when the two are combined, there are some problems. It seems... According to the data I calculated, there is no way to install the two together.

Hearing this, Zhao Guoyang nodded lightly and said: Well, Minister Siyan also told me about the situation before. I have also deliberated on the road, and the problem should be the contact angle of your slewing bearing.

You must know that as long as the contact angle of the slewing bearing changes by one degree, it may cause an error of several centimeters in the diameter of the raceway. The reason is very simple. The simulated turning radius of the 'small excavator' is too large, about 1.5 meters .Therefore, a small change in the contact angle will bring about a huge assembly error.

Zhao Guoyang pointed to the contact angle of the outer ring and inner ring of the slewing bearing on the picture, and said calmly: Liu Yan, you may not have considered this problem when designing, so the contact angle setting was not accurate to the decimal point. It is not uncommon for a little error to occur if there are more than three digits!

After listening to Zhao Guoyang's explanation, Liu Yan patted her head with an ah and said, Mr. Zhao, I remembered what you said. Indeed, when I set the contact angle before, I only took one digit after the decimal point, it was my mistake...

Seeing that Liu Yan had already found the problem, Zhao Guoyang comforted him with a smile on his face: So, as long as the accuracy of this contact angle is adjusted and recalculated, this problem can be solved.

In addition, Liu Yan, you have to remember that when sending the parameters to the production side, you must make a note of this data, so as not to cause problems on the production side!

Okay, Mr. Zhao, I'll start recalculating now!

Liu Yan quickly patted her chest and assured, Ten minutes, ten minutes is guaranteed to complete the calculation!

Zhao Guoyang nodded in satisfaction, turned around and smiled at Zhao Siyan: Minister Siyan, there should be no problem now, right?

Being teased by Zhao Guoyang, Zhao Siyan felt a little embarrassed.

On the phone just now, she was in a hurry, but she almost lost her composure. I think Mr. Zhao must have heard it.

With Zhao Guoyang's instructions, the problem of the slewing ring was quickly solved.

Seeing that all the design work has been completed on time, Zhao Guoyang waved his hand and said, Very good, everyone's work efficiency these days is commendable!

Now, everyone, go to the cafeteria to have a meal, and then immediately start to connect with the production department in the afternoon, and start the next step of trial production!

After hearing Zhao Guoyang's words, Li Zhaohe raised his hand and looked at his watch.

Ah, it's already twelve o'clock, it's time to eat! Minister Siyan, Xiao Liu, Xiao Tang, everyone, stop what you're doing first. You can work better if you fill your stomach first!

Zhao Siyan gave a hmm, clapped her hands, and called people from the new product development department and technology department to the cafeteria for dinner.

Mr. Zhao, haven't you eaten yet? Let's go there together? After greeting the others, Li Zhaohe looked at Zhao Guoyang with a smile on his face and said.

Zhao Guoyang nodded: Well, I happen to have something to do, and I need to consult you, Old Li!

On the way to the cafeteria, Zhao Guoyang threw out his own question.

Old Li, you are an old man in the machinery manufacturing industry in SJ City. Do you know which small shipyards in our SJ City are ready to transfer or sell?

Hearing this, Li Zhaohe was inexplicable for a while.

He murmured in his heart: Mr. Zhao suddenly asked this question, is he planning to enter the shipbuilding industry again?

Before Zhao Guoyang and Shen Zhirong had already confirmed that they were going to cooperate in the private special shipbuilding project, Zhao Guoyang did not talk to Li Zhaohe, but only mentioned it to Zhang Yufang.

Therefore, it is reasonable for Li Zhaohe to be confused at the moment.

Rubbing the back of his head, Zhao Guoyang remembered that he hadn't had time to talk to Li Zhaohe about this before, so he suddenly understood and explained.

Hehe, I forgot to tell you, Lao Li. I'm at the 'Xingtai International Foreign Trade Company', and I'm going to start a new project, which is about 'special ship manufacturing'.

You should also know that there is a big difference between shipbuilding and construction machinery. So, when I was preparing for this project, I didn't consider bringing in 'SMS Company'.

Hearing this, Li Zhaohe nodded in relief and said: Yes, yes, Mr. Zhao, your consideration is correct. Construction machinery and shipbuilding are two different things, and they are not at the same level at all. Even a small shipbuilding enterprise, Its annual gross production value may be several times that of our 'SMS Company'...

Besides, our 'SMS Company' is so busy right now that we simply can't spare manpower to undertake such a big project, and we have to recruit people ourselves! So, we definitely can't take care of this shipbuilding aspect!

Zhao Guoyang gave a hmm and continued: That's right, I've also considered what you said. I'm telling you about this today because I want to see if there is a shipbuilding company in SJ that is not profitable.

If we can directly acquire a small shipbuilding company, more than half of the gap in technology and personnel can be solved, and many problems can be easily solved!

Hearing this, Li Zhaohe nodded in a sudden realization and said, I understand Mr. Zhao. I'll start to inquire about this matter later. When you come back from this 'trip to Africa', there will definitely be news!

Zhao Guoyang nodded in satisfaction and said, Very well, Lao Li, then I will leave this matter to you!

No problem, Mr. Zhao, don't worry, we promise to complete the task! Li Zhaohe said with his head held high.

Seeing the confidence of his assistant, Zhao Guoyang smiled in relief.

...

In the final assembly workshop of SMS Company, the mini excavator SMS120H-1 BE is undergoing the final painting work.

Today is the fourth day, and tomorrow is the deadline given by Zhao Guoyang.

With everyone's joint efforts, this highly anticipated small excavator has finally been trial-produced.

Although it seemed to be a day ahead of schedule, with the 18 hours of transportation from SJ City to the capital, it was just enough to catch up.

Watching the painter finish spraying the last piece of paint, Zhao Guoyang, who was standing outside, nodded with a huh and said, It's ok, Master Wang. Next, just spray the three letters 'SMS' on the cockpit door. !

Okay, Mr. Zhao, I'll start writing it now! Master Wang, who was spraying the paint, echoed repeatedly.

Li Zhaohe, Zhao Siyan, Tang Wanru, Liu Yan and others standing beside Zhao Guoyang were all excited when they saw the brand-new small excavator in front of them.

These days, Zhao Guoyang led the big guys to overcome one difficulty after another. Even in the final splicing and welding, this Mr. Zhao even went into battle to demonstrate it himself.

Needless to say, Zhao Guoyang's welding skills really surprised everyone.

No one expected that such a delicate welding process would be like playing in his hands.

Even Wei Dashan, the leader of the welding team of SMS Company, couldn't believe it after seeing Zhao Guoyang's welding level.

Mr. Zhao, it's all sprayed, do you think it will work? The spray paint master said with his chest out.

No problem, thanks for your hard work, Master Wang! Zhao Guoyang said with a bright smile after making an OK gesture to the spray paint master.

Okay, the people in the transportation team are ready, the forklift will come up and transport the 'excavator' to the truck, and we will start in twenty minutes.

Li Zhaohe saw that Mr. Zhao had no objection, and gave orders directly.

When the people in the transportation team were about to install the small excavator, Li Zhaohe said to Zhao Guoyang with concern: Mr. The hotel rests for a few hours. When the time comes, I will drive you to the airport!

Upon hearing this, Zhao Guoyang waved his hand and said, Hey, Lao Li, I don't need this one. Someone from Mr. Zhang's side will come to pick me up later. I'll go to 'Xingtai International' first, and then I'll talk to Zhang Let's catch the plane together, teacher!

Eh? Is Teacher Zhang going to Africa this time? Li Zhaohe asked in a daze.

Zhao Guoyang gave a hmm, nodded and said, That's right, there are many business representatives in the trade and investment promotion mission to Africa this time. I greeted the leaders of the Ministry of Foreign Trade and intervened for Mr. Zhang. After a class, let her report directly!

Hearing this, Li Zhaohe nodded suddenly.

Tap the screen to use advanced tools Tip: You can use left and right keyboard keys to browse between chapters.

You'll Also Like