My Magic Age

The sound of the magic printing machine printing rune plates rumbled together. Boxes of magic rune plates crashed into the rail car and were transported by the dwarves to temporary warehouses in underground caves. Such temporary warehouses are basically located in Near the teleportation altar, this makes it easier to reach the warehouse in the imperial capital through the teleportation altar.

Due to the increasing production of magic rune boards, the production capacity of the rune board workshop managed by Murray can no longer fully absorb the production capacity of the magic seal workshop. Murray has proposed expansion plans for the rune workshop several times, but I don't want to be in the imperial capital. The workshop here was too large, and he never signed his plan, so the matter was shelved.

This magic sealing workshop was created by four old dwarves that I bought back at the slave market. The metal softener developed by Francis scholar completely solved the manufacturing problem of magic sealing machines. This batch of magic sealing machines has been passed through four times. After the major changes, the success rate of the magic seal machine in printing the 'Fire Gathering Technique' rune board has increased to 65%. Nowadays, the magic market in the Imperial City is flooded with a large number of 'Fire Gathering Technique' and 'Miniature Tornado' charms. Wenban.

The punch of the magic seal machine hit Naqma's black iron breastplate with a huge roar. The mithril magic lines were clearly printed on the black and shiny armor. The two strong dwarves in front of the magic seal machine worked together to hit the iron breastplate. The hook pulled out the Naqma black iron armor from under the magic seal machine, quickly threw it behind him, and then pulled out a piece of Naqma from the material turnover box on the side. The human black iron breastplate was pushed under the magic seal machine along the slide rail of the auxiliary feeding rack. The Nakma human black iron breastplate easily slid into the concave mold of the magic seal machine. Almost at the same time, another dwarf was sliding on the magic seal machine. The punch of the printing machine was brushed with a layer of mithril solution, and the punch of the magic printing machine fell heavily with a roar again, and a brand new magic pattern structure was born.

However, due to the uneven quality of the Naqma black iron breastplate base material and its relatively complex shape, this has brought many uncertain factors to the printing work of the magic seal machine.

Even if these Naqma black iron armors fail during the printing process, they will not become the furnace material in the North Duisburg foundry. There is a group of dwarves responsible for handling these failed black iron armors. They will remove the invalid armors. Wipe off the mithril magic patterns with sandpaper, and then use burlap cloth to rough polish the surface.

I asked the old dwarf Harrelson next to me: "How many pieces of this new Naqma magic pattern structure can be printed in a day?"

Old dwarf Harrelson was followed by a group of young dwarf craftsmen. At this time, he turned his head and glanced behind him. A young dwarf craftsman quickly stood up and replied: "Currently, the magic seal workshop makes almost thirty sets of this kind of magic pattern structure every day." It is expected that the production will be increased next month.”

I walked a few steps forward, stopped in front of a magic seal machine, and asked him: "What do you think is the biggest difficulty in making this new magic seal structure?"

The young dwarf craftsman rubbed his big red nose and said angrily: "Everything is fine! The main reason is that the base material for the magic pattern structure was not sufficiently prepared. The Naqma armors that failed to be printed for the first time need to be re-polished and refurbished. The quality of Nachma's black iron armor is even worse, and this new type of magic pattern structure is too bulky. A single breastplate requires the combined efforts of two dwarf craftsmen to lift it."

Dwarves are born with loud voices, and when they speak in the cave, they will even echo like rolling thunder.

The old dwarf Harrelson stood in front of a large magic printing machine with a shy belly. He tapped the black iron shoulder pad in the material turnover box next to the young dwarf with the crutch in his hand. He puffed his beard and glared at a man sitting in front of the printing machine. The dwarf operator yelled: "Why don't you apply the cosolvent? Who is your squad leader? Send him over here immediately!"

The dwarf operator was so frightened that he fell from his chair to the ground, ran to the other end of the row of magic seal machines in a pee, and brought back a red-bearded dwarf in a short time.

At this time, the old dwarf Harley used his iron cane to knock on several pieces of black iron shoulder armor. It seemed that the mithril magic lines on the black iron shoulder armor were still very strong. The red-bearded dwarf stood in front of Harley nervously. In front of Sen, the old dwarf Harleyson's anger had subsided a lot. He took out a handkerchief and wiped his shiny forehead, and asked the red-bearded dwarf calmly: "Tell me how you ensure the adhesion of the magic lines? "

"Teacher Harrelson...these magic pattern shoulder pads have gone through a 'pickling' process in advance." The red-bearded dwarf whispered.

The old dwarf's eyes lit up and he immediately asked the red-bearded dwarf: "Acid washing? Tell me what you think."

The red-bearded dwarf lowered his head and thought for a moment, reorganized his words and said: "I think there are two main factors that affect the adhesion between mithril solution and black iron. The first one is the oxide scale on the black iron armor parts. , the second point is the black iron armor watch layer of oil stains, so I dug an pickling pool there. After several experiments, our third group came to the conclusion that pickling before printing not only ensures the adhesion of the magic lines on the armor It also slightly improves the printing success rate..."

I couldn't understand what they were talking about, so I asked the dwarf beside me: "What is pickling?"

The dwarf quickly explained: "Acid washing can effectively remove oil stains on the surface of black iron armor."

At this time, the old dwarf Harleyson asked urgently: "Is there a ready-made magic pattern structure?"

The red-bearded dwarf immediately puffed up his chest, pointed to the end of the row of magic seal machines, and said to the old dwarf Harley: "Nearly thirty sets have been rushed out, and they are placed on the armor rack over there. Teacher Harley, please You follow me."

When we walked to the end of the cave passage, we saw a circular cave here. Not only were dozens of Naqma black iron armors printed with mithril magic patterns placed here, but there were also several broken pieces. On the iron table, several printed drawings of the magic pattern structure were spread out on the table. These drawings were filled with various annotations. Several dwarf craftsmen were gathering around an iron table, having a heated debate.

The Naqma black iron armor placed on the wooden frame is more than three meters high. The shape of the upper body armor is a bit exaggerated. The shiny black surface is covered with silver magic patterns. The Naqma people have strong legs and a thick tail, so The lower body armor is basically They were all sent to the blacksmith workshop for recasting. When buying these trophies, I only chose the upper body armor of the Naqma people. The Nakma black iron armor and lower body pants and armor on the shelf now are basically from Beido. Reforged in Isburg.

A set of Naqma black iron armor doesn't look like much, but after these Naqma black iron armors are printed into magic pattern structures, they are hung in sets on the wooden frame. There are lines of mana on the armor that are not stopping. Flow, the visual effect is immediately apparent.

Standing in front of a set of magic pattern armor, if I look straight up, I can only see the scales on the armor's plastron.

"I think the effect is not bad." I groped for the mithril magic lines on the armor with my hands, feeling the magic power flowing slowly on the magic lines structure, like winding streams, flowing from the base of the gems. The base spreads outward, forming a complete array of magic patterns.

I pointed to a set of magic pattern structure in front of me and said to the tauren warrior standing behind me: "Luca, put on this set of primary magic pattern structure and feel it. See what effect this set of magic pattern structure has on you." What an improvement.”

Luka took off the hard leather armor without hesitation and put on the slightly loose Naqma black iron armor. He bumped his two fists together in front of his chest, sending out dull power fluctuations. Luka tried After doing a few squats, lunges, running and jumping, etc., Kalantso raised the 'Ancient Oath' shield that Luka had put aside and said to Luka: "Try two punches!"

The tauren's fist hit the shield, making a 'bang' sound, and Kalantso was forced to take a step back with each punch.

Before Kalancso got angry, the tauren stopped decisively and said to me: "Oh, it looks pretty good. It's a magic pattern structure that enhances power and has no other auxiliary magic effects."

I nodded. This magic pattern structure modified from Naqma's black iron armor was specially made for those barbarian slaves. The 'strength increase' is most suitable for barbarians, but there will be less than two weeks. It's time to set off for Qiyan City. At this time, the Demon Seal Workshop has just made more than 30 sets. The Heavy Crossbow Regiment has a total of 900 barbarian slaves. If they want to change all their costumes in a short time, obviously It's unlikely.

After looking at the production line of Naqma's black iron armor modified magic pattern structure, I asked the old dwarf Harley: "How is the development of the minimalist version of the primary magic pattern structure?"

The old dwarf Harley stopped in the passage of the magic seal workshop and led us into a stone room with only one magic seal machine. The shelves beside the wall were filled with magic printing heads and concave molds. In the magic engraving machine experiment room, the old dwarf Harrison stood at the door and pointed at me a set of black iron armor. He introduced: "The first sample of the minimalist magic pattern structure has been made. At present, the base material of this black iron armor cannot be manufactured in batches. If you want to mass-produce it, you need to add at least five more magic printing machines. , it will probably take at least two weeks to make the remaining magic seal machines."

If these magic pattern structures modified from the black iron armor of the Naqma people are specially made for barbarian slaves, then this minimalist version of the magic pattern structure is for those in the Green Empire who have the strength but have no money to become constructs. It is an affordable structure designed and manufactured by a first-class warrior who pretends to be a knight. I plan to launch this low-end version of the magic pattern structure in the imperial capital tomorrow spring. The price is about 50 to 70 magic crystals. It depends on the manufacturing. costs and market response.

However, before the Winter Magic Pattern Construction Exhibition, Yerkes Scholars still need to re-optimize this minimalist version of the Magic Pattern Structure, so there is room for further improvement in the properties of this Magic Pattern Structure.

I said to the old dwarf Harleyson: "Well, there is no need to rush the minimalist version of the magic pattern structure. Just make it step by step. However, the printing of the magic pattern array on these Naqma black iron armors cannot be delayed. If you want to Find a way to grab it."

Old dwarf Harrison quickly agreed.

…

After Aaliyah and I walked around the underground caves of Xinliu Valley, we returned to the Imperial Capital warehouse through the teleportation altar. Murray's truck just happened to be leaving with a batch of rune boards.

I didn’t take the magic caravan, but I took Aria and walked directly across a street back to Aria’s manor. The winter in the imperial capital was still a bit cold.

Walking directly into the living room through the door, the housekeeper stood respectfully at the door. Under the service of the maid, he took off his coat and long leather boots and put on comfortable soft-soled shoes. Aaliya lay on her side on the soft leather sofa, with two A maid took off the cumbersome accessories on her body. She looked at me curiously and asked, "Are you planning to enter the market of primary magic pattern structures next spring?"

"I haven't thought about it yet. Maybe the first batch of elementary magic pattern structures will not be put into the market, or they can be traded directly to a certain lord. Anyway, during the plane war, this thing will not be unsaleable." I said as I said, While taking the warm towel handed to me by the maid, I wiped my face.

I sat down on the sofa beside her and said to Alia, "Take care of the business in the imperial capital. If you encounter a problem that is difficult to solve and cannot find me for a while, go to find Earl Conrad of the South Wind Legion."

Alia sighed softly and said, "I know. The Babington family has left the imperial capital. What else do I have to worry about? But you should be more careful when exploring in Qiyan City."

I unbuttoned a button on my shirt collar and said, "I invited a lot of people this time, plus those orc warriors and barbarian slaves, safety is still guaranteed. So... it's not me who should be scared, but those lizard tribes."

I was sitting in the living room chatting with Alia. The door of the living room was pushed open from the outside, and Katarina walked in from outside.

She walked directly to my side, handed me a thick parchment note, and said, "Su came to see you today, but unfortunately you were not there, so she left a note for you."

"Is she looking for me about the trip south?" I reached out to take the note and asked casually.

Katarina said, "The note only said that I would like to invite you to drink at the bar in the back street of the Pride Tower."

...

I met the sisters Su and Annie in an oak house tavern in the back street of the Pride Tower.

The two sisters sat by the bar, watching the bartender's fancy performance with great interest. Two young nobles next to them wanted to approach them to chat, but they were scared away by the dagger Annie took out from her arms.

As authentic El people, Su and Annie also like to drink some golden apple wine.

I took Katarina to Su's side. At this time, Su's face was flushed from drinking. She raised her head and saw that it was me. She narrowed her bright eyes like crescent moons, like a night lily that suddenly bloomed. When we met, she asked me drunkenly: "Jijia, when are we leaving?"

"Have you communicated with Lord Sora?" I said, sitting in the empty seat next to her.

Su said very straightforwardly: "Yes! I haven't had a long vacation for so long, and the teacher also supports me to go out for a walk."

"That's good." After saying that, I asked the bartender for two glasses of beer.

Su and Annie were wearing cashmere skirts that girls in the imperial capital like to wear. This long skirt looked very loose on Su, but it was tight on Annie, showing Annie's curvy and sexy figure. I asked Annie on the other side, "Sister Annie, do you know a good guide who is familiar with the Savage Swamp in Qiyan City?"

Annie raised her head and said to me casually: "The guides who are most familiar with the Savage Swamp are the slave catchers. They form a small circle in Qiyan City and rarely deal with outsiders. Only slave traders can contact them..."