My Pet is a Snapping Turtle

Chen Shen could only sigh, and smiled bitterly. The situation at Taishan Knife had hit him too hard.

He has worked in this industry for more than ten years, and has also worked in Shante Knives for several years. He always believes that Shante's knives are the best in the world.

The situation that happened next to him greatly overturned his cognition, and he was in a bad mood.

Have you seen the test situation of the Taishan Knife next to it?

I see, I really don't understand what they are doing yelling.

Hearing that his colleagues didn't know what was going on, he felt even more bitter.

Chen Shen sighed again, That's what they were celebrating. Their set of knives has processed more than a dozen parts in one go at a speed of 3000 rpm. The knives are not worn at all, and the processed parts are completely intact. Qualified, the appearance is very beautiful.

What!

This is impossible!

Those people in Shante all looked sluggish, and it took a long time to come back to their senses. Their first reaction when they came back to their senses was disbelief.

How can there be such alloy knives in the world, if there is, it will be born in Shante, not Taishan Knives Group.

The two foreigners from Shante glanced at each other quietly, then nodded lightly, quietly went to Taishan Knife, stretched their necks, and pricked up their ears.

Among the crowd, there was another burst of cheers, and another part was beautifully processed.

This is the first one.

It is already the 21st piece, and the tool has not been worn out at all. It seems that there will be no problem in processing another 21 pieces.

Oh my god, today is a good posture. A set of alloy tools can process dozens of parts in one go. This is the first time I have seen it.

The key is that these parts are all made of high-temperature alloys, typical difficult-to-machine materials. The people from Shante next to them are testing knives. I heard that they can only process four parts with a set of knives, and then they have to take the knives down for regrinding. Or replace the alloy blade.

It's like a dream. When did our domestic alloy knives become so awesome.

The scene was lively, and more and more people came to watch the excitement, almost three floors inside and three floors outside.

The faces of the two foreigners in Shante gradually darkened, knowing that they were completely slapped in the face this time.

The two of them lost all face, and returned to their side in desperation. When they told the situation, all of Shante's people were shocked.

Don't play like this at all!

A set of alloy cutting tools can process dozens of parts at one go, so why not try it, there is no comparison at all.

Slip, can only slip.

The people from Shante packed up their things and left in despair.

afternoon.

There are a total of 45 parts in this batch. This CNC drilling and milling process may have taken two or three days, but it was completed in half a day.

Tsk tsk, this is too heaven-defying. There is still no obvious wear and tear on this set of knives.

It's really amazing, today is an eye-opener.

.

The workers and technicians on the sidelines were discussing enthusiastically, each of them admired so much that they almost knelt down. This set of knives from Taishan Group is too good.

All the parts have been processed and all the inspections are qualified. Finally, this set of alloy tools has been unloaded, and the magnification inspection is carried out on the tool setting instrument.

When magnified 30 times, only a little bit of wear can be seen, and when magnified 50 times, it is slightly clearer.

Feng Xuesong was so satisfied that he burst into laughter, Mr. Han, the wear of the tool is very small, and there is no need to sharpen it at all. It is no problem to process another 20 or 30 parts.

At this time, Han Guang's mood was extremely good.

My heart is also full of gratitude, the black alloy cow that Brother Yong gave me has given me such a big surprise.

He is keenly aware that with this kind of black alloy, there will be basically no such foreign knife manufacturers in the future medium and high-end alloy knife market.

After the drilling and milling process was completed, this set of alloy cutting tools performed perfectly, which brought great surprises to everyone.

In addition to drills and milling cutters, Han Guang also brought several cars of alloy blades.

Han Guang said, Master Feng, how about we try counting alloy blades next?

Okay! Feng Xuesong readily agreed. Seeing that the boxes of blades that Han Guang took out were all black and shiny, he cheered up and looked forward to it.

How about the performance of such a blade, how many parts can be turned by one blade.

Schedule now!

Feng Xuesong said loudly, Where did Fan Gong go?

Many people looked around and looked for it.

A technician said, Gong Fan left long ago, he is not here.

Feng Xuesong said slightly dissatisfied, Playing the piano indiscriminately, why did it disappear at this time?

Fan Gaoyi didn't have the face to stay here, he slipped away quietly when he processed more than a dozen parts.

He knew that he was slapped in the face today.

The imported alloy knives he admired very much failed completely, it was completely defeated.

While no one was paying attention, he left in a hurry.

Feng Xuesong personally called another senior technician and gave some instructions. Then, the trial knife of the CNC turning process began.

The same is still a high-temperature alloy material. This material has poor turning performance, especially the wear on the tool is relatively large. If an alloy turning tool cannot turn two or three parts, the alloy blade needs to be replaced.

The workers of this CNC lathe are making preparations, such as installing the shiny black alloy blade from Taishan Group, loading the parts to be processed on the workbench, and so on.

Han Guang, Feng Xuesong and others were looking at the CNC machining program. After watching for a while, Han Guang said, Director Feng, I think the parameters of the CNC machining program need to be changed.

Feng Xuesong deeply agrees.

Therefore, the original processing speed was changed from 30 rpm to 200 rpm, the depth of rough turning was changed from 0.8 mm to 2 mm, and the depth of finishing turning was changed from 0.3 mm to 0.5 mm.

After the parameters have been modified, the machine is powered on and turning begins.

Similarly, there are many people around this CNC machine tool, including workers, technicians, and some management personnel such as team leaders.

Wow, the turning speed is so fast!

See, at such a fast speed, the lathe does not vibrate at all, and the sound is very small.

This is the real moisturising.

Really been waiting!

Originally, it took about 55 minutes to turn a part in this process, but the turning was completed in only 12 minutes.

As soon as the protective door of the machine tool is opened, the first thing everyone sees is a very beautiful part with a bright surface like a mirror.

Anyone with experience knows that the surface of the part is so bright, which means that the alloy tool used to process it is very sharp.

Niubi!

Eye-opener!

The surroundings became lively, everyone commented, and almost all of them were full of admiration.

Check parts, pass!

Check the knives, no wear, still like new!

Second part, third part, fourth part.

It was processed until the evening, and there were a total of 42 parts in this batch, all of which were finished, and the few alloy turning tools had not yet reached the point where they needed to be replaced with alloy blades.

This should be put in the past, who would believe it!

The next day, in the afternoon.

Holding a thick knife test report in his hand and a few samples of alloy knives, Han Guang went to Universal Building excitedly.

The third update!