Porter of Two Worlds

Chapter 456 Achieve mass production!

Stretching out his hands and pinching his arms and legs, Bai Yang didn't feel that his body was hardening, but there was a faint khaki light flowing on his body surface, which could resist ordinary swords!

Although it was not the first time to use talismans, Bai Yang still found it amazing.

Talisman paper and ink are made of many kinds of materials through special processing techniques. When these things are combined with professional tools and sequential descriptions, they can show such a magical effect.

He didn't know whether to classify this genre as physical chemistry or metaphysics...

The armor talisman is just the most common talisman. The so-called resistance to swords and slashes is probably only to the extent of cutting people with knives on the earth. Martial disciples who have practiced martial arts in this world can split them with force, and the effect is not great. However, if it is used on the battlefield, it can resist the flow of arrows...

After some experiments, Bai Yang came to a general conclusion on the effect and use of the armor talisman.

It is not very useful, after all, it is the foundation, and the effect can only last for about five minutes, so it can be classified as a one-time consumable.

With the previous experience, Bai Yang once again controlled the talisman to draw a few armor talismans, and with his clever mind, he quickly mastered the process by heart.

To sum up, when drawing symbols, the hand should be steady, the lines should be even, and the order should not be chaotic. The most important point is to finish the drawing as soon as possible, so that the ink can form a circuit before it dries.

If Bai Yang paints it by himself, it’s fine. This thing pays attention to a touch. Every talisman master has accumulated experience over the years. His half-way monk can’t do it except for hanging, unless he spends a lot of time practicing.

With experience, it's easy to handle. There is more than one talisman pen. His power of thought is strong enough. After an hour, he can even control ten talisman pens at the same time to draw Jianjia talisman, and the time can be controlled within five seconds. , Zero error rate!

The cheating life doesn't need to be explained, it's just so unreasonable.

In this way, the purpose of mass production can be initially achieved, but this thing is very troublesome. Every detail must be paid attention to. If you don't pay attention, your head will hurt, and you can't really achieve large-scale mass production.

Finally, Bai Yang clapped a stack of armor talismans in his hands and began to think about mass production again.

Squinting his eyes, he looked at the inkstone that was filled with the ink for drawing the armor talisman.

With a thought, a piece of talisman paper floated in the air, and a drop of ink flew up from the inkstone, elongated like drawing silk in the air, and the ink thread of about one millimeter was drawn in the air, forming the pattern of the armor talisman. When the pattern was formed, he controlled The pattern formed by the ink silk fell onto the talisman paper!

A faint khaki-yellow light flashed on the talisman paper, and the ink blots penetrated into it, like a natural texture!

It's done, the fact is that it's okay, as long as the ink lines are even, the order is normal, and a circuit is formed before it dries up, combined with the talisman paper is a finished talisman!

His eyes lit up, Bai Yang found a shortcut.

The next thing is short, the ink in the inkstone forms a droplet and flies up, and the mind controls the drawing to wind and interweave into a talisman pattern, and then combine with the flying talisman papers!

In three seconds, Bai Yang drew thirty armor talismans at the same time, with an average of ten armor talismans per second!

Although this method can still achieve the purpose of mass production, it consumes more energy than controlling ten talisman strokes and talismans at the same time with my mind. I will feel dizzy and dizzy in half an hour at most. Bai Yang frowned.

Although this method takes a shortcut, it is not suitable for real mass production, and it is only the most basic talisman. It is more troublesome if it is a little more complicated, and it cannot achieve the purpose of mass production.

So in the end, we still have to rely on technological means, Bai Yang looked at the equipment prepared beside him.

There are computers, copiers, and printers.

The diesel motor is ready to be placed in another basement, and the wiring board has been pulled over after the transformer is connected.

Just think about it.

Start the motor, turn on the computer and copier printer.

Replace the ink in copiers and printers with ink that depicts armor symbols.

Bai Yang tried the copier first, replaced the paper with talisman paper, and tried to copy a piece of armor talisman, but it turned out that it didn't work at all, and the copied one didn't have the expected effect at all, even if the same material was used.

The reason why the copied ones don't work is probably because the ink of the copier didn't outline the patterns in the correct order of characters. If so, the inkjet printer won't work either.

Painting talismans, this is the method of Shinto monks. The experience summed up by countless ancestors in the endless years, the order cannot be messed up. If the order can be messed up, there are also engravings in this world, and mass production has already been achieved.

Bai Yang frowned and concluded in his heart.

Engraving and engraving can theoretically draw talismans quickly, but there is one thing that limits this shortcut, that is, the lines of the talisman must be thin. This is difficult to do, but it is not impossible to overcome. You can't do it until the drawing is complete, and it will be a failure if you do it.

The lines should be thin and not dry. If you still insist on engraving, the wet ink will produce a paste, and you can't distinguish the clear lines at all, so there will be no effect...

Then there is only one last method left. Finally, Bai Yang looked at another set of equipment beside him.

After moving his hands and feet, he turned on the computer, called up the professional motion capture software, and then wrapped a wireless small motion capture device on a talisman pen with tape.

Then, he controlled the talisman pen to draw symbols in the correct order, and the trajectory of the entire talisman pen movement was captured by the motion capture device and stored in the computer.

Then, success or failure depends on the next step!

Rubbing between his brows, Bai Yang looked at a weird machine that had been installed beside him and muttered to himself.

It is a fully automatic robotic arm, and it can faithfully execute the motion trajectory only by inputting motion parameters.

In order to achieve the goal of mass production, Bai Yang racked his brains.

Fix the talisman pen on the mechanical arm, and then input the motion capture to capture the trajectory of the talisman. Try to start it first. The mechanical arm swings back and forth between square inches, and the sequence of actions that correctly depicts the armor talisman is not the slightest difference.

As expected, it is a high-end product purchased at a high price. There is nothing to say about flexibility and stability. The only thing to pay attention to is that the connection between the talisman pen and the mechanical arm may affect the finished talisman. Let's experiment first.

After carefully observing the operation of the mechanical arm with his mind, Bai Yang had a clue in his mind.

Put a piece of talisman paper under the robotic arm to control the robotic arm to be stained with ink, start!

There is almost no sound when the mechanical arm moves, and the movement process is faithfully started.

Obviously, the first time I failed, I couldn't draw a solid armor talisman. It wasn't that the mechanical arm made a mistake, but the height was not well controlled, which made the line drawn under the talisman pen thicker.

This is easy to solve, just adjust the height.

After a little adjustment, Bai Yang started for the second time, but it still failed.

However, it is only a small problem. The fixation of the talisman pen and the mechanical arm is not very stable, which causes the talisman pen to tremble slightly when drawing symbols, resulting in errors.

Re-fixed and adjusted the height, Bai Yang activated the mechanical arm for the third time.

This time, while he was waiting nervously, a piece of Armor Talisman was finally successfully drawn!

Ahahaha, it's a success. It's really Chen Gong. This represents the preliminary combination of this technological means and another civilization, and its significance is extraordinary!

Bai Yang couldn't help cheering when he saw the successful Armor Talisman.

What does this mean? It shows that the depiction of talismans can reach the point of mass production. Although this is only the most basic talisman, it is a good start. Even if it is the future high-level talisman, Bai Yang Nianli can't draw it without capturing the dynamic order. It doesn't matter. It's a trick Just kidnap a professional talisman master!

Great, let me think about it, there is still room for improvement in the robotic arm, and it can increase production

Establish a special assembly line, let several or even hundreds of thousands of tens of thousands of robotic arms draw symbols together, just control the placement position and pause time of the lower symbol paper, and even use the robotic arm to finally collect the finished product

By the way, there is also the talisman pen that needs to be improved. Anyway, as long as the ink is uniform, the talisman pen is not used at all. After all, the so-called talisman pen is just to make the ink uniform and not solidified. So the easiest way is to use a needle tube. Instead, add an ink reservoir, use a needle to pump out the ink, and adjust the speed of the ink, which can also be replaced by a machine.”

In this way, the mass production of runes is not a dream!

When the first Armor Talisman was drawn by the mechanical arm, Bai Yang spun on the spot with joy on his face, and countless thoughts flashed through his mind in an instant.

Then he started the production of the Armor Talisman again.

He prepared ten sets of mechanical arms, fixed the talisman immediately, activated them all, and entered the dynamic program.

The next moment, the ten sets of mechanical arms started to draw symbols for him in unison.

As long as the robotic arm has a program, it rarely makes mistakes, and faithfully executes the command. After ten seconds, ten armor symbols are drawn, and the yield rate is 90%!

After all, it is a machine, and there will be mistakes. This is completely expected by Bai Yang. After all, professional talisman masters still make mistakes.

Then, in order to confirm the idea in his heart, he traveled to the earth and bought an infusion tube and an infusion bag at the pharmacy.

Put the ink into the infusion bag, insert the needle tube, the needle tube is fixed on the mechanical arm, and then use the small device on the infusion tube to control the speed of the ink outflow, and then continue to draw characters.

This is a bit difficult. After all, the ink will continue to flow out after the infusion tube is connected to the infusion bag, and the ink cannot be drawn out and collected correctly at the beginning and end of the talisman drawing. It was Bai Yang who used his thoughts to help draw the talisman smoothly.

It doesn't matter, it's enough to let the machine control the ink out and ink collection, but now it proves that things like talismans alone can be mass-produced. This is just a solid armor talisman based on the first grade. The first-grade golden talisman, the third-grade golden light talisman, etc., when these high-level talismans have reached mass production...

Thoughts turned in Bai Yang's mind, and it was inconceivable to think of this suddenly.

Think about it, if hundreds of thousands of millions of people, even ordinary people, are covered with all kinds of high-level talisman aids, what a terrifying picture it would be to wield a knife?

Robotic arms replace human hands, computer programs replace brains, you have nothing to say, right?

Please remember the first domain name of this book: . Mobile version reading URL:

Tap the screen to use advanced tools Tip: You can use left and right keyboard keys to browse between chapters.

You'll Also Like