rebirth of wrong love farewell

After instructing the girl on today's dance, the two said goodbye at the school gate.

Looking at Lan Youruo's receding figure in the red sunset, Liang Nuo sighed and walked towards his aunt's car.

She will always be there alone to be strong, stubborn, and lonely.Today, he thought she would say it, but after all, he overestimated his position in her heart.

Tomorrow is her 17th birthday.

However, she never mentioned it from the beginning to the end.Why exactly?Let her hate and hate men like this in her past and present lives.Even he was not spared.

After clearing up his slightly uneasy mood, Liang Nuo opened the co-pilot's door and got in.Looking at the woman reading documents in the driver's seat, she smiled and said, "Auntie."

Wang Shiyin put down the documents in her hand, turned her head and smiled lightly: "Since you are here, let's go."

Liang Nuo hummed lightly, then sat there quietly, stroking the velvety beard beside his lips with his fingers.

The 17-year-old boy is growing towards maturity, with a thicker and stronger body, a taller figure, a protruding Adam's apple, and an obvious blue beard around the corner of his mouth.He was a little uncomfortable with the thought that he could only shave off his beard after it turned black and stiff.After all, he used to be a girl.And girls more or less have a beauty-loving nature.

Wang Shiyin glanced at his small movements from the corner of her eye, and a smile appeared on the corner of her mouth, a boy in adolescence!

Tonight, the last step in the decomposition of the platinum structure will be completed, and then jewelry can be made.

As soon as Liang Nuo looked at the receding scenery outside the window, he thought silently: Lan Youruo, I've really fallen!

After dinner, Liang Nuo stood in the courtyard to let go of all troubled thoughts, and slowly and regularly twisted his knuckles, allowing his body and soul to achieve the greatest harmony.

A quarter of an hour later, he walked to his jewelry processing room. Tonight, he was going to make a bracelet that belonged exclusively to her.

After entering the fingerprint and command password to open the door, Liang Nuo walked in and then locked the door.

An excellent jeweler always has the habit of completing all the preparations before making a piece of jewelry, because once the production starts, it means a high concentration of spirit. At this time, any slight mistake may make the finished casting Jewelry is taken down a notch, and it is impossible for the jeweler to leave his work table while it is being crafted.

An absolutely quiet and undisturbed working environment is an important prerequisite for production.During the production process, especially during Lan carving, if the processor gets distracted, the whole piece of jewelry will be scrapped.

Liang Nuoyi took out the protective box containing platinum from the constant temperature cabinet, put it on the processing table, and opened it.

Platinum has been in a softened state. As a precious metal with a melting point higher than that of gold and silver, it took 7 days just to break its normalized physical structure.

Afterwards, Liang Nuoyi came to the solvent area, took out No. 1, No. 5, No. 7 and No. 12 glass test tubes from the nest, and put them into the sockets on the processing table.

During a period of time in the previous life, the combination of chemical reagents and jewelry became a hot topic in the jewelry world at that time.Especially when a research institute in the United States formulated synthetic and decomposition reagents specially suitable for jewelry processing, this chemical heat flow swept the jewelry field around the world, giving jewelers a new vitality of thinking.

Most of the jewelers at that time added those chemical solvents during production with a tentative mentality, but they did not want to create more novel jewelry styles, and what's more, different jewelry showed opposite colors on the same decoration.

And what he used was an aldol catalyst, which produced a Perkin reaction with platinum, shortening the reaction time for its softening.

Sitting on the stool, Liang Nuo put on the protective sleeve and opened the boxes containing various metals one by one.

Pick up the tweezers with the left hand and place a silver bar in the box on the heating area, start the heat source to heat.Then, pick up the hot silver and put it in the case stone.Put down the tweezers in your hand, pick up a special pointed hammer and slowly beat it into thin cylindrical strips with a diameter of about 3 mm.

With the left hand, pick up the miniature brushed inverted mark knife on the table and plunge it into the surface of the silver bar, hold the handle tightly and slowly pull up the buckled point, at this time, move the right hand across the wooden board with 52 wire-drawn holes , Embed the initially pulled wide silver wire into its largest hole.

Afterwards, he carefully started wire drawing, repeatedly pulling the silver bar out of the hole and then drawing it a second time along the wire drawing hole in the wooden board, repeating 52 times, and finally the silver wire was as thin as a hair.

Put all the silver wires into a small dish, and Liang Nuoyi used duckbill tweezers to clamp the platinum in the box to a special chopping board, then scooped up the ruthenium and rhodium metal powders in different small boxes, and put the powders all together. Put into a clean glass test tube.

Then, take another test tube and scoop in a 3:1 ratio of powdered crystal powder and powdered blue crystal.

Pick up the No. 7 reagent and remove the cork, suck in about 20cc of sdyhldtx synthesis solvent with a rubber dropper, and drop the solvent into the ruthenium and rhodium metal powders.Pick up No. 1 aomskeld catalytic solvent, and use a clean plastic dropper to suck in about 10cc of solvent and drop it into the blue powder crystal powder.

The glass test tube was gently shaken with two hands respectively. A violent chemical reaction was going on in the metal powder tube, and then cloudy white liquid appeared on the tube wall.However, the inside of the crystal powder tube is in a peaceful state, the crystal is slowly decomposed and melted, and a purple dreamy liquid is placed at the bottom of the tube.The initial fusion is completed.

All the preparatory work has been completed, and the next step is the production of the bracelet.

Liang Nuoyi adjusted his breathing quietly, and closed his eyes to reduce his fatigue.The next steps are directly related to the charm displayed by this bracelet.

After 3 minutes, Liang Nuo opened his eyes, and his eyes were shining brightly like broken diamonds.He is serious.

First pour the platinum in the protective box into the chemical dish, pour the purple liquid that has completed the chemical reaction on its surface, and then pour the white liquid.Quickly picked up the allocated No. 12 and No. 5 test tubes, poured No. 12 solvent into the test dish, and poured No. 3 solvent after 5 seconds.

And he had to mold the platinum within 5 minutes of completing the chemical reaction, otherwise, the molecular structure of the platinum would form stably, which would be extremely troublesome.

Liang Nuoyi moved the platinum to the beating area, picked up the hammer and beat it regularly and quickly. To form a natural texture, it depends not only on the material but also on the secret method of the processor during production.

And his secret method is to use the frequency-changing properties of matter produced by extrusion.The physical properties of the substance will change when it is hammered, but as long as the amplitude of the change is mastered, the substance can be made to form ripples that appear naturally.

After beating the platinum into a rectangular shape, pick up the Rubic scissors and cut it off to make a bracelet, and then proceed to the second actual beating to make it more compact.

When the overall thickness of the platinum was only 20mm, Liang Nuoyi immediately stopped beating, and picked up a chisel to hammer on its surface to create patterns, making the patterns more penetrating and concave-convex.

When the level reached his requirement, Liang Nuoyi held the engraving knife to punch holes according to the outlined parts. At this time, the test was the piercing skills of the processor, which is the basis for forming jewelry patterns.

His hand stably and forcefully passed through the platinum, but he inserted it at different angles. This method can make the subsequent refinement of the bracelet more perfect.

He accurately pierced 16 holes, including 6 large holes and 10 small holes.After the perforation is completed, the 16 empty points are carved with a multi-round knife, forming beautiful blue and empty patterns with arcs and regular geometric shapes.

He then grooved the platinum to remove excess material from it.Use the vertical axis cutter to process and carve the gong shape of the bracelet to make it more linear, smooth and graceful.The bracelet base outline is completed.

Then use a small knife to pick up the leftovers scattered on the table that are most suitable for buckles, put them in front of the table, hollow them out, and use the seamless connection method to connect them to the top of the bracelet.

As soon as Liang Nuo looked at the bracelet that had been molded, he turned his wrist slightly, and the most critical step was about to begin.And his time is only 3 minutes.

This is also the most frustrating part for platinum jewelry processors. Once the best production period is missed, the next steps cannot be integrated with it anyway.

He brought the small dish with silver thread and put it on the table, and began to modify the bracelet, and the most beautiful modification was not too filigree.

He used tweezers to fold and pinch the silver wire into exquisite and gorgeous patterns, and then used a dotted pen knife to inlay the one-to-one corresponding positions. In an instant, the bracelet became a beautiful exhibit.

The whole bracelet presents a silvery white color, and the filigree pattern is distributed and inlaid around the blue sky pattern, which looks so chic and moving.Not to mention its pure color.

And that's not enough.In her previous life, she was the most complicated one among the teacher's students. Although her carving skills were not as proficient as the second brother's, it was enough for her to carve on her own jewelry.

The most common carving techniques are miniature carving, relief carving, openwork carving and Lan carving.Today, she will carry out micro-carving on this small bracelet, so as to deepen and modify the layout of the whole bracelet, so that its value will increase several times.

After moving the bracelet under the continuously zooming electron microscope, Liang Nuo adjusted the zoom and focal length, picked up the micro-carving pen knife and made a fist, and wrote steadily in the tiny space with his hand.

For a 17-year-old high school girl, owning a piece of jewelry inlaid with precious jewelry is their innate love of beauty,

But for Lan Youruo, she was originally so charming and charming, with a very enchanting charm.If she wears that kind of luxurious jewelry, she will really become a monster, and it will easily bring her disaster.

Therefore, this time the bracelet does not have the part inlaid with jewels, which does not show the dazzling brilliance of the jewels.But it is the only ornament in the world, and it contains his sincere blessing to her.

When he was conceiving, he considered countless micro-carving patterns, whether to paint romantic scenery that girls like, or the simple landscape, or abstract runes.But after every night of hesitation and choice, he finally decided to give up all of these.

He came across time and space from his previous life, chasing after her existence, with guilt towards her.

He thought, what could be more important than the most sincere blessings from friends on her life track just started?

Therefore, in the micro-carving at this moment, what he carved on the platinum surface that was dizzy with lavender light was the clear words: must be happy!

He focused on the world under the lens, and kept moving his hands slightly. He repeated these four words only because he only thought about these four words in his heart and mind at this time. He wanted her to be happy. , I want her to be happier than all the girls in this world.

The heart of his fist was upward, and the sculpture was pushed inward, without breaking a single stroke.Then, holding the knife in the right hand like holding a pen, put the ring finger and little finger tightly against the bracelet to move the knife forward, carefully controlling the tip of the knife.As time goes by, those four words are so continuous.

Gradually, looking at it with the naked eye, the bracelet seemed to be plated with a layer of beautiful patterns, which appeared so perfectly.The lines are clearly branded around those patterns, complementing each other.

The pattern of characters and the pattern of silver are intertwined and entangled, forming a beautiful picture of Doniville, but they are naturally displayed in front of everyone with the effect of real texture like a girl dancing.All the people are deeply attracted by its dazzling noble temperament.

He controlled the tip of the knife, and with the palm facing outward, he cut off the text with the last stroke.finished.

At this time, there is only 5 seconds before the completion of the final chemical reaction.Within five seconds, Liang Nuoyi picked up the round knife and engraved her name from her previous life on the joint: Wei.

This is also the last and only time in his life that he signed such a signature.In the previous life, among her countless jewelry, there was only one engraved with the logo, and that was also the first work in the previous life, which was dropped into the heart of the river by her own hands.

After 5 seconds, the actual production of the bracelet is completed.

Platinum, as a symbol of eternity, can always retain a pure white luster as time goes by, while platinum bracelets that have changed its properties through chemical reactions are even more radiant.

The pure and noble atmosphere of a girl emerges from its delicate lines, and the lavender rouge powder that can only flow under the sunshine, so affects the hearts of all the girls who have seen it.

It is undoubtedly a perfect work, not to mention the creator's most sincere and pure blessings for that girl.

Liang Nuoyi quietly looked at its dreamy flow that shone under the light.

Name: Maiden Feelings.