The American strong and miserable villains always want to stick with me [Quick wear]

Goss didn't hesitate for a long time. He looked at Qing Ye's eyes on the round stage, and then wrote quickly, so fast that the tip of the pen almost shook out.

Is this trying to stress me out?That's ridiculous.

Ji Wushi withdrew his gaze and spread out his virtual operation interface. The above was already a complete appearance of Qingye, compared with all the outlines of Qingye in reality, reaching a very accurate ratio.

He is confident that with this step alone, he can get rid of Goss for nearly half an hour.

Ji Wu keeps rotating the virtual image of Ao Ye on the screen, making him walk, run, sit, and lie down. This is the first step of the mechanic's work: verification.

Through the all-round test, the mechanic can roughly understand the defects, functions and advantages of the operating object, and design a set of most suitable solutions by making use of the strengths and avoiding the weaknesses.

Ji Wushi's speech bubble here is also very peaceful:

【Appeared!A test chart that is as tight as a textbook! 】

[The order of No Time Boss is obviously the most suitable, from top to bottom, from inside to outside, four movements are enough to see clearly from any angle]

[How much time has passed, and the test has been completed and the picture is completed. You are indeed a timeless boss! 】

[Is it actually four deficient and three excellent?I only see two deficiencies and two excellent QAQ]

【Wait, what is the opponent over there going to do? 】

Goss has just started to write like a fly. First, he drew a three-view overall view of the front, side and back, and then drew a split view of Qingye's limbs, torso and head. Most of them are divided into two perspective modes, inside and outside, as if passing through Qingye The surface of the shell sees the same as the inside.

However, there are still places where he fails to draw perspective.

[Is this really hand-painted...? 】

[The proportions are perfect, if you tell me it's a machine diagram, I'll believe it...]

[?What, this was drawn by him. I just came here, and I would like to ask him what kind of movement he took to get such a detailed picture? ? ? 】

【His diagram is much clearer than the machine diagram...】

Although the proportion of the mechanical drawing is fine, it is inevitably aimed at the whole and cannot be refined to the specific parts, and it is not as expressive as the hand drawing, just like in the teaching of a mechanic, no one will use the mechanical drawing to teach.

Therefore, every master can often draw a good picture.

Goss stopped writing, but apparently left out several interior renderings.

He stepped forward, stood in front of Qing Ye, tapped his knees, and patted his back.Aono was stiff and didn't know what to do, he stood there in a daze, only backed away when he was knocked on the knee, and then watched Goss go back.

What is this doing?

Only the audience who paid attention to Goss knew that he went back and drew the rest of the internal perspective, down to every part.

【Did you find out? 】

[The picture he draws is different from the picture of the boss Wushi...]

[Why did he paint three layers?How can someone's mechanized structure be like this? 】

[The drawing is wrong, I have never seen this type in a book]

[Six deficiencies and four excellences?There are two more deficiencies and one advantage than Wu Shida, he couldn't write it blindly, right?]

After completing the inspection, the next step is to design.Based on the advantages and disadvantages just identified, design a plan that belongs to the mechanic himself. This step is often the step that best reflects the mechanic's style.

Ji Wushi began to try out parts, paint, and replace each component on the virtual screen. A series of accurate operations can also show his steady style.

He has a high degree of mastery of all mechanical parts, almost every part is stuck precisely, and the maximum effect of that position is perfectly played, and the admiration of the speech bubble is almost never broken.

Goss was very confusing. He put together several parts diagrams, replaced parts here and then replaced them at the same time. Almost every time he had to replace five or six in a row, his fingers were flying. dazzled.

Part modification on the virtual screen is also very real, spark arcs occur when removing parts, and shapes are felt when touching parts, which is why mechanics wear glasses and gloves.

All the audience on Goss' side watched as Goss touched those gleaming parts with his hands.

His eyes adjusted the pupil size automatically with the flashes from time to time, and there was a vague icon in the center. His fingers carefully stroked those parts as if they were appreciating works of art, and then placed them where they should be without thinking.

[Has his eyes been mechanized? 】

[It's the first time I see a person who doesn't use protective equipment to operate [light a cigarette]]

[Everyone, I think this may not be a noob]

[Haha, which Xiaobai hand-painted the pictures with such precise proportions, and memorized the parts so skillfully? 】

[Needless to say, I'm trash]

Goss enjoys the feeling of touching each part with his fingers. Every time he picks up a part, all kinds of data can quickly appear in his mind, and the unobstructed touch allows him to perceive their shape and temperature. This skill can Let him be more careful than others in the design of the fitting mechanism.

Of course, the eyes of ordinary mechanics cannot face the arc light generated during operation. He has mechanized his whole body to 90.00%, the biggest reason is that he can perform mechanical operations better.

Metal, machinery, and bionics, these constitute his ideals and his beliefs.

After thousands of parts replacements, Goss finally came to the end of the design. He put the entire design into a simulation run, and the audience was amazed: the functions of these parts can be linked!

Previously, each part was almost independent and disorganized, but now, they complement each other and complement each other!

[Is this after removing the flaws on the right leg and installing an acceleration component on the left leg at the same time?Surely the movement speed can be doubled in the future, right? 】

[What's even more frightening is that he took out a leg part and put it on the neck...I've never seen such a high efficiency of parts in my life]

[He has adjusted his joint flexibility, hearing, and vision to the best! 】

[No one said that this kind of laser shell design is very cool... The mechanic who specializes in appearance is willing to bow down]

[He also used the triple part design, was he originally responsible for the maintenance of the operating object?But the method doesn’t look like it]

Before I knew it, there were as many viewers following Goss as there were viewers following Seasons.

In horizontal comparison, Ji Wushi's operation style is impeccable, stable and standard. Nagos' operation style gives people the feeling that there is only one word: creativity.

Whether it was the first time to feel the parts without wearing protective equipment at all, or to draw hand-made drawings that are more detailed than machine-drawn rubbings, or the way of multi-component linkage upgrades to promote capabilities, they have never seen it in textbooks. , Even the masters around and in the network will not use these methods.

People who watched Goss' operation had a doubt in their hearts: Who is this person?

I made a special trip to the KH Group to kick the gym. Does this master have a grudge against KH?

That's right, everyone who has watched Goss's operation will willingly call Goss in his heart: Master.

Goss still had that unhurried and leisurely look. He clicked the "Run" button on the virtual screen, and the joints of the projected Aono phantom used a laser shell. Laminar, made a defensive posture.

After all the parts have been run on the virtual screen, it comes to the next step: assembly.

Ji Wushi's speed was faster than that of Goss, and he also saw that Qingye's biggest advantage was feeling, and the most obvious flaws were his right leg and neck.

The plan he designed on the screen is in operation: cover the exposed mechanical exterior with nude spray paint as much as possible, so that it looks like a purebred, and there is no trace of mechanization at all.

On the virtual screen, Qing Ye moved freely, dancing a light and light dance, with body coordination and graceful posture throughout the whole process.

Just looking at the simulated operation of the two people, there is actually not much difference. Both designs seem to move freely and look good.

Then, we can only look at the design results of the two during the actual assembly.

Assembling requires real materials to realize one's own ideas. This step is a test of the mechanic's hands-on ability. It is very likely that the failure of one part to remove rust will lead to the collapse of the entire structure.

This process will also involve the participation of assistants.

At this stage, the gap between the two assistants was vividly reflected - the apprentice on Ji Wushi's side didn't know much about many instructions, and he didn't remember some unpopular parts at all, and he was obviously unfamiliar with operations such as gold-plated cleaning and expansion, which made Ji Wushi cold Sneering coldly: "You entered KH through the back door?"

In fact, the level of apprentices is already higher than the average level of intermediate mechanics, but in this duel, in order to achieve perfection and win beautifully, Ji Wushi used a lot of remote parts to arrange a lot of complicated operations, which was beyond the level of the average mechanic. Apprentice's knowledge base.

And the storm on the other side took it easy from start to finish.

Goss is very familiar with all parts and operations. He has no concept of "unpopular parts" and "out-of-range operations".

The thing is, no matter what the outlandish maneuvers, the Storm pulls off perfectly.

【... What angle did the master say to cut it at?I didn't hear]

[Cut at 30.00 with a refraction rate of [-]%, you didn’t hear it, you didn’t understand it]

[Is this an operation that humans can do? 】

【Why can't... that assistant did it without blinking an eye...】

[This assistant is at least advanced, no one objected, right? 】

By the way, everyone discovered the horror of the storm.

When Ji Wushi's patience was being worn out under the blank gaze of the apprentices, Goss and Storm worked together to process the parts, and quickly finished all the parts.

A speech bubble slowly floated out of the little trash's head:

【I'm so nervous, can this novel operation method work? 】

Goss laughed and popped the bubble, saying, "It's not exactly a novel way of operating, but rest assured—it works."

The author has something to say:

I will be joining V on Friday, August 8th, thank you for your support~ I will post it in the middle of the night

Please continue to walk with me!