Start with a blacksmith shop

"** has not yet succeeded, and comrades still need to work hard."

After Li Zhenhua finished speaking, he walked to the pile of knife blanks and took out five of them.

When I came to the belt sander, five knives were clamped on the clamp one after another.

As the two of them watched, Li Zhenhua turned on the belt sander, and the motor rotated at high speed, driving the sanding belt to rub against the knife surface.

Soon the clamp was pushed to the limit, and Li Zhenhua knew that one edge of the knife had been completed at this time.

Take the entire clamp off the base, turn it over, and grind it again on the belt sander.

When Li Zhenhua took off all the knives from the belt sander,

The edges of the five knives were all polished. After inspection by Li Zhenhua's eyes, their errors were all within controllable range.

These five table knives that have been sharpened are a very meaningful testimony for Li Zhenhua.

This proves that the clamp he made is indeed useful, and he does not have to waste time on this sharpening process.

"Guo Ba, the next job of sharpening the knife will be left to you. You sharpen the knife, and then let Liu Xiaodong be responsible for the rough grinding. I will use high-grit sandpaper to finely grind the knife.

We strive to carry out all the knives to the final step of pickling within the next three days. "

After Li Zhenhua made the arrangements, the three of them began to do their own part of the work.

Three days passed by in a flash, and only three people passed by. Finally, the table knife, which was polished with 1,200-grit sandpaper, was placed on the felt cloth, waiting for the final process.

The remaining pickling is the simplest process. As long as the pickling solution is prepared,

Turn on the 24V power, no one needs to intervene, just watch the time, and when the time comes, just take out the knife.

From the raw materials that Li Zhenhua and the others bought at the beginning, they finally made 1,316 knives.

In addition to these finished products, there are also 103 defective products.

Guo Shugui's own eyes were all attracted to the finished table knife, while Liu Xiaodong was fascinated by the defective ones.

"Hua Zi, this knife is so beautiful. I feel that the price you set before was a bit low, but this time I made a lot of money."

Thousands of knives are placed together, and the blades reflect the cold light in the sun. This scene is still very shocking.

"Hua Zi, these knives are all mine."

Guo Shugui looked at these knives and hurriedly declared his sovereignty over them, fearing that others would snatch them away.

After Liu Xiaodong heard Guo Shugui's words, he also intervened from behind.

"No one is trying to rob you. Look at how impatient you are.

Hum hum, the person you need to curry favor with most now is the blacksmith next to you.

As long as he is around, don't you want as many of these knives as you want? "

When Guo Shugui heard Liu Xiaodong's words, he quickly responded.

He quickly ran to Li Zhenhua and showed his hospitality to him.

But Li Zhenhua was really not paying attention to these two people, but just now, he received a message in his mind.

"Ingenuity" (Humi level) Brother Nao said, I can do it;

Brother Eye said, this is too simple, I understand everything;

Brother Shou said, it’s a piece of cake, I can make them all. ’

{Proficiency: 1137/100000, upgrade conditions are unknown, please continue exploring. }

After receiving this message, Li Zhenhua was very excited.

If there were not two people present now, he would have jumped up immediately.

After working hard for half a month, his skill has finally been upgraded.

I saw that the level name is also mentioned in detail at the end of the skill, Humi.

This unit of length is not used much in our daily lives. It is often used only in factories and other places.

Usually, the factory talks about a plus or minus tolerance of 5 threads, and the thread in the middle refers to lumens, and the strips and channels also refer to lumens.

The conversion between humometers and various units is that one millimeter is equal to ten silk meters, one hundred hum meters is equal to one thousand microns.

But Li Zhenhua was a little confused. He originally thought that the next level was Simi.

Now this is great, we crossed Simi and came directly to Humi,

Li Zhenhua himself was thinking about this level. He guessed that this might be related to the fact that Simi was abolished in the 4681st year of the Yellow Emperor's calendar.

In the international system of units after millimeter, micron, silk meter and kilometre are not included in the International System of Units.

They are only used as a supplement to the unit of length. In formal occasions, silk meters and kilo meters are not used.

Maybe the system thought it was too much to work directly to the micron level, and the middle piece of micron was no longer used.

And Humi, which is silk, can still be used in life, so this level has been added.

This level can be compared with Li Zhenhua’s current level, which has been greatly improved.

This is not a small improvement, it directly increases the accuracy by a hundred times.

With this precision, ordinary processing cannot stump Li Zhenhua at all.

Guo Shugui and Liu Xiaodong have been thinking about the future appreciation of this knife, but they have forgotten.

Although this knife was made by Li Zhenhua, there are still a lot of them in stock. There are more than a thousand knives. Besides, Li Zhenhua has the final say on how many more he will make in the future.

After Li Zhenhua completed the skill upgrade, he began to plan.

He thought that he should also make a knife for competition later.

"Guoba, Fatty, you two stop talking now. Fatty, go and drive the pickup truck to the door.

Guoba, please give your purchasing department a call. We will go directly to you for purchasing in a moment. "

Li Zhenhua looked at the table knives he had made and they were all piled up in his home. This was nothing!

In this case, it is better to let Guo Shugui take away all the knives now.

After Guo Shugui heard what Li Zhenhua said, he also knew to send the knife to his company early so that he would not be afraid that someone would cut him off later.

Although no one is trying to rob him now, who can tell what will happen in the future?

The pickup truck drove to the door of the blacksmith shop, and Li Zhenhua and Guo Shugui walked out holding a large box.

He came to the city wall pickup truck and put the box in his hand into the cargo compartment behind the pickup truck.

The three people worked together to load five full cartons and one unsatisfied box onto the pickup truck.

After the car was loaded, Liu Xiaodong started the car, and Guo Shugui and Li Zhenhua sat in the back seat.

At this moment, Liu Xiaodong asked Li Zhenhua.

"Zhenhua, these knives have been made, what should we do next?

Are you familiar with all your skills? Should we start building knives for the preliminaries? "

When Li Zhenhua heard the question, he thought to himself: 'It's time, it's really time to make a knife for competition. ’

"Fat man, you are right. Tomorrow we will rest at home for a day to adjust, and the day after tomorrow we will officially start making knives for competition."

Guo Shugui, who was playing with a knife in his hand, immediately became interested after hearing this.

He quickly turned to look at Li Zhenhua beside him.

"Hua Zi? Work is about to start? That's great. Let me also see the difference between your production process of making competition knives and my table knives."