Super Weapon Exchange System

Right things and wrong people.

In the past, Master Zhang was also a great man in the northern heavy truck factory. He belonged to the stubborn and conservative category, but later, Qin Guan taught him.

When Qin Guan used pneumatic tools and easily defeated him in the workshop technology competition, he finally realized that he was behind. After that, with the earth-shaking changes in the factory, Master Zhang thoroughly realized that advanced technology brought Realizing that quality is the first vitality, he supports the reform of the factory very much.

After that, he also became a technological leader, relying on his own experience and continuing to learn, enrich and improve himself, and perform well in the factory.

This time he merged with the Haihe Automobile Factory, he was selected and came here to be the director of the press shop.

He knows that he has a great responsibility on his shoulders, and he has to work here wholeheartedly so that no production accidents or quality problems can occur!

After working in the factory for many years, of course, Director Zhang also knows that the style of the factory here must be problematic, and there is also a problem in consciousness. It is necessary to let them change their style, change their consciousness, and move closer to a real large enterprise in the shortest time. !

"Director Zhang, there is a problem with the decoiler." Just then, a worker ran over and said.

The first step in manufacturing the car body is to disassemble the transported steel coil. This cannot be done by manpower. Manpower cannot move it and it is also uneven. Now, when he heard that the uncoiler was malfunctioning, he immediately set off and moved towards it. Away.

The factory has just started production and needs to run-in, as long as the current problems can be eliminated as soon as possible, the products can be mass-produced.

Only in this way can we better support the construction of the country.

Just look at the history. This type of van has been produced at Haihe Automobile Factory for more than 20 years, and only hundreds of thousands have been produced. In future generations, this is not enough for a private automobile factory to produce a year. Why? It is because of backward production equipment and production technology.

At that time, most of their production was done by craftsmanship, but now they have entered the stage of modern industrial equipment.

Director Wang looked at the car. Twenty pieces of steel body panels that had just been stamped were about to be scrapped. Naturally, he couldn't bear it. So, the workers who followed the cart kept leaving the factory.

"Hey, Xiao Liu, stop." Of course Director Wang knew him. This Xiao Liu was a worker in the factory before.

"Director Wang, it's a waste to scrap such a good body steel plate." Xiao Liu couldn't help but say when he put down the car.

He also felt distressed.

"Let’s hurry up and knock out the defective place. Can’t it be done?" Director Wang said, "Let’s fix it and send it directly to the welding workshop. Waste it."

When Director Wang said so, several other people also nodded one after another.

The trolley was pushed to an inconspicuous corner, and a few people brought hammers and iron felts. In the past, everyone did that. Now, they are still able to do it!

Even Director Wang, who used to be a sheet metal worker in the workshop, knocked on it himself, and soon recovered the problematic part.

"Stone away this imprint." Director Wang said.

Although it was painted with a cross, it is not difficult for everyone. As long as you polish it with a grinding wheel, it will be gone and nothing will be seen.

After tossing for a long time, finally, these twenty body parts were restored.

"We are for the factory and the country to save money." Director Wang said: "Now, send this part to the welding shop."

Xiao Liu was a little embarrassed. The process was wrong. Without the seal of the quality inspector, this batch of components would not be able to enter the next link.

"Looking at the person they sent is not there, just hand over the parts to someone we know, isn't it all right?" Director Wang said: "Just send it in, where did they check it so carefully."

Director Wang said this, and Xiao Liu nodded. He had to find a chance to send in. This was really interesting, because the factory didn't waste it, and it was like a thief.

In the welding workshop, electric sparks are splattering. Robot welding is still not popularized. The welding is still done by workers. However, the parts between the car bodies are controlled by robotic arms. Therefore, the **** joints are not bad. It's easy too.

The several steel plates of the body are welded together to give the appearance of a body shell, which is the body in white.

The body-in-white needs various pretreatments before it can be painted, so that the paint will not fade for ten years.

The northern heavy-duty truck factory has been sold for two years, and has won praise from users with its strong and durable construction. Look at the heavy trucks produced by other factories. After two years, the paint on the cabs of heavy trucks has been The color has changed, but the northern heavy trucks are still as bright as new. Today's drivers are very caring for their vehicles. They are naturally quite proud to see their cars look like new ones.

The Haihe Automobile Factory used to produce the cab, knocked out the hammer, then welded it, and sprayed it directly with a hand-made watering can. There was no treatment. Now, in their eyes, these steps are too cumbersome and wasteful. .

The body-in-white is welded together, and then the door needs to be installed, so that the whole body can be treated together in one color.

A worker pushed the car door onto the white body with the help of a robotic arm, and then used a pneumatic tool to make a few beeps, and it was installed in place.

Then, he pushed it smoothly, only to find that the movement of the door did not seem to be very fluent. Upon closer inspection, there seemed to be something wrong with the position of the rear body and the track?

"Report, there is a problem with the car body here!" He suddenly shouted: "The problem in the stamping shop, how did this defective product get out of the shop?"

He also came from the northern heavy truck factory. Now, looking at the traces of the beating on this steel plate, he knows what happened. This is a serious production accident!

Yes, this is of course also called a production accident.

Because of the problem of this body stamping plate component, the whole body was scrapped!

Even if he can pass it here, when the body-in-white leaves the factory and passed the quality inspector, it will not pass the inspection. How did it pass the inspection in the previous workshop?

This is not only to be scrapped, but also to be held accountable. This kind of serious production accident must be held accountable to individuals. Bonuses should be deducted, bonuses should be deducted, bonuses should be deducted, and bonuses should be deducted.

Fortunately, he discovered it early. In the back, there were already five problematic steel plates that were welded, and fifteen steel plates were not used. Otherwise, the loss would be even greater!

The accountability was investigated, and soon arrived at the stamping workshop. At this time, Director Zhang had just coordinated and completed the repair of the decoiler. The workers were inexperienced. The running speed of the decoiler was too slow and the rolls in front were too fast.

Just after solving this problem, Director Zhang heard that there was a problem with his stamping parts, and he was taken aback. How could it be possible? All quality inspectors are transferred from the northern heavy truck factory, and it is absolutely impossible for unqualified stamping parts to leave the factory!