Rebirth in 1989: Creating the Chinese Technology Empire

Everyone stayed where they were, even Mr. Lin.

He thought that Xu Huasheng would bring some surprises, but he never thought that Xu Huasheng would bring such a big surprise.

A five-axis CNC machining center, and it is a five-axis CNC machining center manufactured by Huasheng Group itself. Lin Zuotang knows best how precious this thing is.

Even the top Ministry of Aerospace Industry does not have this thing.At present, the most advanced machine tools in the country are several four-axis CNC machine tools obtained through special channels.

Although five-axis is only one axis different from four-axis on the surface, this so-called one-axis difference is technically very different.

Considering that even the powerful Soviet Union failed to produce a CNC five-axis machine, you will know how difficult it is to make this thing.

At present, there are only a few countries and companies in the world that can produce CNC five-axis machines, and those countries and companies have imposed the strictest embargo on China.

Especially after the Toshiba incident, these companies have been subject to strict supervision by the United States. Every piece of equipment is under supervision. It is basically impossible to use special channels to get to China. Let alone five-axis, even four-axis is now unavailable. .

Therefore, although many domestic units are covetous about the five-axis, they also know the current situation of the country. This thing is something that can only be thought of.

But now, a huge surprise comes directly.

CNC five-axis, China has it.Not only is it available, it is also made in China.

"Xiao Xu, are you kidding? Is this really a CNC five-axis?"

Mr. Lin asked quickly, and the others also looked at Xu Huasheng with expectation in their eyes.They have really never seen CNC five-axis, they have just heard about it.

"Mr. Lin, is this something you can joke about? Let's try processing a component on site..."

Xu Huasheng's suggestion immediately made everyone nod.

Whether it is true or not, you will know if you try it.

seeing is believing.Soon the equipment was started, a metal ingot was fixed on the fixed table, and the machine was officially started.

The entire processing center became busy, and everyone stared at the processing center with expectation in their eyes.

As the machining center was busy, the metal ingot began to slowly change its shape. The square metal ingot was processed, and its prototype slowly came out.

I don’t know how long it took, but after the last movement of the machine tool ended, a product appeared in front of everyone.After seeing this product, everyone swallowed their saliva.

This is a graceful and luxurious peony, but this peony is a metal peony. The petals of the peony are lifelike, each one is different, and the thickness of each petal is also different. The thinnest part is even as thin as a cicada's wing.

Beautiful, this metal peony makes people feel beautiful.

But the focus of everyone at the scene was not on this. They were all knowledgeable people, and they knew very well how difficult it was to process this metal peony.

Without the CNC five-axis, it would be extremely difficult to process such a thing. The CNC machine tools currently owned by Huaxia cannot complete it at all.

With manual machine tools, unless those national treasure figures take action, it is possible to process this thing, but even if they can process it, the processing efficiency is very, very low.Even though the CNC five-axis machine can quickly produce one peony, if it were done manually, it would probably take many days to produce just one peony, and there would be a lot of losses in the process. Making ten peonies may not be successful.

CNC five-axis solves not only the problems of processing accuracy and processing difficulty, but also the problem of processing speed.It’s true that some things can be rubbed out by hand, but in the industrial age, you can’t just rub everything out with your hands.

For example, you can rub one of the high-precision aero engines with your hands, but you can’t rub them all with your hands.A single piece of large-scale equipment requires a very large amount, and it is simply unrealistic to rub these products by hand.

But now, with this CNC five-axis, everything has become much simpler.Things that were almost impossible to make before, or things with extremely low output, can now be produced on a large scale.

"Mr. Xu, what is the maximum processing accuracy of this equipment?"

"Mr. Xu, what is the production capacity of this equipment..."

"Mr. Xu, how do you sell this equipment..."

The exhibition hall immediately became lively, and everyone gathered around and started asking for various information.Everyone's eyes were full of excitement. At this moment, they couldn't wait to get this equipment to their own units.

Lin Zuotang stroked the CNC five-axis machine, feeling the temperature of the equipment, but his eyes couldn't help but turn red.

As an astronaut, Lin Zuotang knows what the machine tool in front of him represents.With such machine tools, many of China's technologies that have been stuck in finishing will have breakthroughs.

At the same time, the output of many products that require finishing will be greatly increased, such as advanced intercontinental missile engines. If there are sufficient five-axis machining centers, the production capacity of these big killers will be greatly increased.

Missiles are big killers, but these big killers depend on technology on the one hand, but in addition to technology, quantity is also important.

Only with enough numbers can we attack the enemy with greater intensity.

Saturation attack is the way to go. If you can bomb for five days, don't bomb for three. Problems that can be solved by bombing should not be solved by humans. This is the way war should be now.

China has always had a phobia of insufficient firepower over the years, and because of this phobia, some of the weapons developed by China over the years are characterized by firepower first.

Five-axis, with five-axis, not only the output of many products can be improved, but the quality can also become better.

For example, the engine used for missiles may have had a shorter range due to poor processing accuracy in the past.Now with five axes, the missile engine can be processed with higher precision and better performance.

Thinking of this, Lin Zuotang couldn't help but think of the distant fire they were developing.

With the five-axis, the production accuracy of the engine for long-range fire will become higher, and the range will also become longer.The most important thing is that the production capacity of long-range rockets will also be greatly increased. With the increase in production capacity, the cost will be greatly reduced.

By then, it won't be too much to equip battalion-level units with this thing.It's not too much to have four or five launch vehicles in one battalion.

If hundreds or even thousands of vehicles were deployed on the southwest border, and a war really broke out and a volley of fire broke out, the spectacular scene would be absolutely beautiful.

From the border of China to the capital of India, the straight-line distance is only more than 300 kilometers.The design range of long-range fire is as high as 500 kilometers or even higher.

By then, if there are thousands of fireworks lined up at the border to put on a beautiful fireworks show, then these fireworks will definitely be the most beautiful fireworks in the world.

As for the monkeys in the south, this kind of distant fire can cover most of the monkeys' country in China.If the monkeys continue to be disobedient and jump around, China can let them watch a more beautiful fireworks, which is definitely much more beautiful than 107.

As for the east, hey, the straight-line distance from Weihai to Seoul is only four hundred kilometers.

Thinking of this, Lin Zuotang suddenly felt that the 500-kilometer range was not enough. Although it could reach Seoul, it could not reach Tokyo. Doubling the range would probably be about the same. No, 1200 kilometers would be more appropriate.

What should we do to achieve a range of 1200 kilometers?How much longer do the rockets need to be?How much thicker does the diameter of the rocket need to be?