Siheyuan starts from a good life

In the next month, Jiang Yan visited each workshop one by one and found out the situation of each workshop. Then he held a meeting with his boss and workshop director. Since workshop 1 was a smelting workshop, there was no major change. , other workshops have basically undergone changes to a certain extent. After the changes, the entire institute began to implement the "rotation, promotion and demotion" system.

After the initial run-in, the enthusiasm of the workers began to increase, and the entire production capacity was greatly improved. After seeing that everything was on track, Jiang Yan explained to the technical department, and Jiang Yan directly moved his office to the tenth workshop. Inside.

However, when Jiang Yan was busy reorganizing all the workshops of the institute, he did not forget about the tenth workshop, and the tasks had been arranged.

The transformation of the new Fifth Master and Zhan-6 modified aircraft is proceeding steadily. Jiang Yan does not worry too much about this, but only solves their problems from time to time.

The appearance drawings of these three types of aircraft were handed over to the special studio. Jiang Yan asked them to build the aircraft according to the model. Now that they have their own wind tunnel, they can just blow it, which just combines the advantages and disadvantages of the aerodynamic performance of these three types of aircraft. Blow them all out.

Zhan-7 aircraft Jiang Yan drew three aircraft sketches, one is the original front-intake Zhan-7 aircraft, one is a lower-front air-intake aircraft, and the other is the untimely Zhan-7MF of later generations, which will be used in the vast military in later generations. In the eyes of fans, he is known as "Xiao Zhan Ten"

However, if the Zhan-7MF aircraft were placed in Jiang Yan's era, it would be a fully advanced fighter aircraft. During the confrontation project, it was found that the Zhan-7MF fighter aircraft can basically compete with the third-generation aircraft. If it is replaced with a more advanced aircraft engine, , also a leader among the third-generation machines.

From the time they started drawing, Jiang Yan would arrange relevant personnel for production every time a drawing was drawn. Due to special needs, Jiang Yan also had relatively high requirements for workers who process parts. After coordination between the two departments, Jiang Yan and his tenth There are a large number of middle and high-level workers in the workshop, so that the lowest-level workers in Jiang Yan's tenth workshop are also drivers. In every factory, there are four eighth-level workers who can be the treasure of the factory, but there are also four eighth-level workers working here. Therefore, the strength of the tenth workshop of the institute is absolutely powerful.

Historically, various modifications of the Zhan-7 failed to make dramatic improvements due to the innate design limitations of a certain Ge-21. The Zhan-7MF launched by Rongcheng Aircraft Manufacturing Company is a bold attempt to break this "fate"

Although the Zhan-7MF has been greatly improved and improved compared to the current main model of the Chinese Air Force, the Zhan-7, it is still a second-generation or second-and-a-half-generation fighter. At that time, our country already had a new Zhan-10 aircraft with better performance.

What's more, if we can independently manufacture this kind of high-end precision equipment, even if we only produce one or two more units, it is possible for us to have a little more say in the international community.

In this day and age, this sophisticated machine and equipment represents the sophistication in the field of machine equipment. It is not only technologically advanced, but also plays a huge role.

Although our current aviation industry is still in its infancy, Jiang Yan does not mind setting a higher starting point for this initial stage. Even if it cannot be developed immediately, it will lay a solid foundation for the development of future aircraft.

浜叽叚banduo笁:cbanduo簩锲:cbanzuo浂a:c锲涗竴涓::涓涓擓锲

"Okay, I'll be right over." Jiang Yan packed up his things, stood up, and prepared to test the batch of parts that arrived in the warehouse.

After the other three laboratories were arranged, Jiang Yan focused all his energy on the precision equipment imitation project team.

These days, dedication is what matters, so Jiang Yan was forced to start working overtime. However, this batch of drawings, with the participation of so many people, took almost a month to draw. After the drawings were completed, Jiang Yan reviewed them one by one, and only arranged production after confirming that they were correct.

It has to be said that the group of painters sent by the superiors are quite professional. After Jiang Yan's decomposition, there are tens of thousands of large and small parts in this precision instrument. Jiang Yan alone made these parts Draw it out, it’s the year of the monkey and the month of the horse.

Otherwise, I would not have gone through special channels and spent a huge amount of money to get such a machine back.

"Boss, a new batch of parts has begun to arrive. Technician Zhou asked me to come over and notify you." Secretary Xiao Gong came to Jiang Yan's office and told Jiang Yan.

Being able to imitate this kind of high-tech precision equipment will not only save the country a lot of foreign exchange, but also allow our comrades on all fronts who are fighting outside to no longer have to take huge risks to get such a thing. The machine is back.

The improvements to the Zhan-7MF have not done enough to improve our army's air combat capabilities. It may be a waste to use limited resources on such a low-achieving fighter. After all, there is no practical significance in building more fighter jets that cannot meet the basic requirements of modern air combat.

Jiang Yan also asked for the photos and photography that Jiang Yan took during the installation in the base. These things were of great help to Jiang Yan. With the pictures of these parts, Jiang Yan only needed to dictate the details of these parts. After recording the parameters, the staff will draw the drawing of the part according to Jiang Yan's requirements.

At the beginning when Jiang Yan worked with them, they were still a little rusty, and the drawings they had time to draw had some flaws. After getting used to it for a period of time, basically they could quickly understand whatever Jiang Yan said, and the drawing speed also improved. accelerate.

In order to obtain this sophisticated equipment, comrades on all fronts overcame difficulties that are unimaginable to ordinary people to complete this arduous and unusual task!

But after today, all of this will become different. As long as Jiang Yan can successfully assemble this fake precision equipment, then I, Tu, will have a precision equipment that represents high-precision technology and has great effects!

With the second station, there will be a third and fourth station, and there will be more in the future.

Most of the parts have been produced. This batch of parts are basically the core parts of this machine. The precision requirements for the parts are unprecedentedly high. Therefore, when producing this batch of parts, Jiang Yan told them, This batch of parts were all produced by workers with level seven or above. Jiang Yan was excited to hear that this batch of parts had been produced. After the last batch of parts entered the factory, assembly could begin if the tests were accurate.

The last batch of processed parts, as well as some electronic components that need to be allocated by superiors, are now all in place. Seeing that there are still warm parts in the warehouse, I can't help but pick up the tools and start testing. After testing, most of the parts were qualified. The problem of insufficient accuracy of some parts was solved after Jiang Yan made a little refinement.