Siheyuan starts from a good life

"Xiao Gong, arrange for people to move all the parts on the list to the installation workshop." Jiang Yan handed a piece of paper to Xiao Gong and gave instructions.

Then I went to the installation workshop first and started preparing for the final installation.

The installation workshop is actually a larger workshop, but there are countless brackets installed on all four sides, and these brackets have corresponding numbers.

There are also corresponding numbers on the parts. Just put the parts on the corresponding shelves according to the corresponding numbers.

"How's it going? How's the situation?"

浜屽叚banduo笁:cbanduo簩锲:cbanzuo浵a:c锲涗竴涓::涓涓锲涗紴

In 1953, the original Shengjing No. 156 Machine Tool Factory was renamed Shengjing No. 1955 Machine Tool Factory and was included in the 8 key projects of the national "First Five-Year Plan". Developing and manufacturing one's own lathe is everyone's dream. With the help of experts from Mao Xiong, my country began the design of the first ordinary horizontal lathe. Just two years later, in August 620, the first C1 independently produced in my country The -60 horizontal lathe was born. This lathe was also the lathe used by the workers in the third set of RMB 2 coupons issued in the s, symbolizing the industrial-led thinking at that time.

This task of replicating precision equipment is not only taken seriously by the two departments, but also by the relevant departments and leaders at higher levels.

During the "First Five-Year Plan" period, under the guidance of experts from Mao Xiong, the First Ministry of Machinery Industry (referred to as the "First Machinery Ministry") laid out a group of backbone machine tool enterprises known as the "Eighteen Arhats" according to professional division of labor, and also established four Jiucheng Metal Cutting Machine Tool Research Institute (the predecessor of Sijiucheng Machine Tool Research Institute) is a group of machine tool research institutions known as "seven institutes and one institute".

"Of course. It's not too late for me to be happy with your help!" Jiang Yan said.

Under Mr. Xu's excited eyes, Jiang Yan walked out of the door of the installation workshop, went to a liaison officer sent by his superiors and said, "Okay, you can notify the superior department to come and pull the machine."

Many countries in the world, including some allies of a certain big country, are trying every possible means to get one back. However, the cost of getting this sophisticated equipment back was too high.

In fact, this time Mr. Xu came here to discuss with Jiang Yan the issue of the wings of the Zhan-7 aircraft. As soon as he arrived, he listened to the report from the people below. He was going to assemble precision instruments today, so Mr. Xu didn't even bother to rest and came directly. Arrive at the assembly workshop.

After a while, all the parts had arrived in the installation workshop. In order to avoid being disturbed, Mr. Xu specially arranged for guards to guard the workshop and requested that even if the sky fell, Jiang Yan's work could not be disturbed.

With Mr. Xu's help, Jiang Yan assembled the precision equipment that he had personally produced very seriously and quickly.

In China, they also tightened their belts and paid a huge price to finally get two of them back. Many excellent personnel were sacrificed for these two devices.

All the components and assembly steps of this precision equipment are deeply imprinted in his mind. When assembling, he can be said to be very familiar with it and there will be no jams or errors at all.

"Okay." After the liaison officer answered, he quickly ran to make a phone call to contact his superiors.

It's not that he is so anxious, the key is that there is a shortage of precision instruments everywhere. It is precisely because there are too few countries with this thing, and many projects are waiting in line. If it can be manufactured, it will naturally solve a lot of things, so when I heard it started He was so eager to assemble the team.

After all the required data was recorded, Mr. Xu came to Jiang Yan nervously and spoke.

It didn't take even two months to assemble that precision equipment, which represents high-precision technology, for production?

The relevant leaders of the institute simply couldn’t believe it!

You must know that even internationally, this kind of machinery and equipment is a representative of high-end precision, and this manufacturing technology is only in the hands of a certain Western power.

To put it bluntly, Jiang Yan has successfully copied such a machine. Even if it is just one more machine, it will definitely change a lot of things!

From the moment Jiang Yan started drawing, this liaison officer had never left Jiang Yan's side, so Jiang Yan could only use it smoothly. But as soon as Jiang Yan started assembling, he and his secretary Xiao Gong were waiting outside.

Because this precision machine, which represents high-end technology, is extremely important to our scientific research work, especially the data support for aerospace projects.

"Is it done?" He asked subconsciously as he looked at the assembled machine in the center of the assembly workshop.

How long did it take from setting up the project team after receiving the task, to processing and manufacturing various parts, to the overall assembly of the equipment?

"Okay, I'll turn on the power." After speaking, Mr. Xu found the power switch and pressed it hard.

After turning on the power, Jiang Yan also pressed the start button.

"Mr. Xu, we have started testing." After resting for a while, Jiang Yan could only speak when he looked at Mr. Xu who was still standing there and watching.

After receiving the call from the liaison officer, the relevant leaders were stunned. How long had it been?

"No problem, no problem at all, but it needs actual measurement."

When the country was founded, the equipment manufacturing industry, including machine tools, was almost completely blank. At that time, there were only about 9.5 machine tools in the country. In 1949, my country's first lathe, the six-foot belt lathe, was born in Shengjing No. Machine Tool Factory. The advent of these machine tools and their subsequent mass production strongly supported the country's industrialization construction and created many production miracles in the future.

However, at that time, there was a lack of technical personnel in our country, a serious shortage of manpower, and the development of machine tools was relatively slow. Almost all the machine tools produced were imitations of foreign machine tools. Even so, only mid- to low-end machine tools could be produced. Therefore, the country annually They will also spend a lot of money and manpower to purchase these precision machine tools through special channels abroad.

But this Jiang Yan actually succeeded in forging one in less than two months. What does this mean? Others may not understand, but these leaders understand quite well.

"Isn't this right in front of you?" Jiang Yan said while wiping his sweat. Then he murmured to himself in a tone that Mr. Xu couldn't hear: "I wonder if having such an additional device will change some history?"

"Xiao Jiang, how about I come and help you." Jiang Yan, who was preparing tools in the installation workshop, heard this voice and looked up to see Mr. Xu standing in front of Jiang Yan with a smile.

Historically, flower growers have also attached great importance to the production of machine tools and precision machine tools.

Roaring sounds sounded in the assembly workshop, and Jiang Yan took a pen and started recording various data.

In the 60s, my country's relationship with Mao Xiong became increasingly tense, and its relationship with the West did not improve much. Therefore, there were very few ways for my country to purchase precision machine tools. Every precision machine tool that could be purchased was a treasure. The same existence.

The big leader was also surprised when he received the news. He knew that Jiang Yan was powerful, but he never knew that Jiang Yan was so powerful.

After repeated confirmations, the big leader believed this thing. After knowing it, the big leader was ecstatic.