The Black Tech Life of Scum

Xincheng Electronics, located on the edge of Quancheng High-tech Park;

Today they ushered in a group of customers. Originally, there was an order for a thousand machines. However, the single value of tens of thousands of dollars did not cause any high-level attention.

Only the marketing and sales departments receive orders in accordance with normal procedures, the project manager coordinates the resources of each department, and the production plan is scheduled .... everything is done step by step, it is necessary to start scheduling, at least half a month later;

However, an order was suddenly issued from the highest level, and various departments were required to cooperate to bring this small toy order to the priority order to arrange production ...

Now all the departments are messed up. According to such a thousand sets of orders, in fact, even in the PVT stage, the production time required is only two or three days;

But for these two or three days, it also had a great impact, because the schedule on the production line was originally full;

Equipment utilization rate, production line utilization rate, and even the time to transfer products are counted by the industrial engineering department in minutes;

That is to say, this side is ahead, and that side will be dragged back .....

As for the production staff and the like, instead of training, designate a location and give a job instruction to start production ...

At this stage of the electronics manufacturing industry, it has experienced the need for individual skills to work alone and to work collectively on the assembly line;

Until now, the main work of personnel on the production line is to control the machine, or to replace the development of posts that cannot be completed by some machines. Then, the machine will replace the personnel;

One after another quietly discussed, does the boss of this toy order have anything to do with the boss?

As a result, Zhang Yifan received unprecedented preferential treatment when they entered the factory;

The personnel department has specially set up a conference room for them to use as temporary office space, and uninterrupted supply of fruits and tea;

The production planning department arranged the production line with the latest equipment and the lowest downtime rate .....

The quality department transferred the sharpest and most experienced veteran QA to this production line;

The engineering department specially sent two technicians, one staring at the quality of the wave soldering equipment on the production line, and the other was responsible for testing the normal operation of the equipment;

Even the production line has selected some skilled hands over, the entire production line does not even have a temporary worker;

The incoming inspection department also worked overtime in advance to carry out strict sampling inspections. When some plastic incoming materials were approved, they organized personnel and cut them out with a utility knife ...

In short, all preparations are made to open the production line at the fastest time, at all costs ...

After the last adjustment of the assembly station, the production line was about to start, Zhang Yifan and Lexus discussed it, and then stopped .....

If production continues in this way, the quality will be out of control at all, not even where the problem occurs, because there is no way to track down;

——————,

Liu Xiaoming, a production line employee, the kind of Yueyueguang, the main purpose of entering the electronics factory is actually to chase a girl home and get married-all said that there are many girls in the electronics factory;

After I entered the factory, I realized that there are indeed many women, but most of them are aunts, but the benefits in the factory are not bad, and the work is considered leisurely, so I stay.

Because he is a young man, he has good hands and feet, and knows some basic computer operations, so Liu Xiaoming ’s post has always been a test station;

The leader confessed before work yesterday. Tomorrow there will be important customers coming over to produce a new product to let everyone do a good job 5S before work.

At the morning meeting led by the foreman early this morning, the rare supervisors also participated and even said a few words. It was nothing more than letting everyone pay attention to discipline, ensuring 5S in their posts, and doing anti-static work. and many more....

I usually do not see such a battle in half a year, even if there is a customer to audit the factory, it is not so tense;

Therefore, everyone is close to the enemy, and Liu Xiaoming is no exception.

When the production line has not been opened, he can only do nothing over and over with his dusty cloth to wipe the test bench he is responsible for;

The engineer who listened to the test program before said that this set of things will cost hundreds of thousands. This test station is still important when this new product is trial production;

Yield data should come out from here, and after such testing is assembly, the final assembled product, if there is any failure, maintenance, analysis need to scrap the shell ...

If the production line runs fast, there is likely to be a missed test. If the missed product moves to the next station, Liu Xiaoming, who is responsible for the test, will be punished;

Soon, Liu Xiaoming discovered something different:

The staff of the Engineering Department is constantly busy, adding bar code guns and computers to the production line, almost packed.

Liu Xiaoming has also seen before that some demanding power products need to scan barcodes on several key processes, such as test stations, aging stations, shipping inspections, etc .;

It's just that this time it seems to be overdone, almost every station has to scan ...

In other words, after these barcodes are associated in the system, as long as it is found that one of the parts is out of order, it can be recalled in the system immediately. What are the components produced by the supplier, what specifications, which cycle and even the operation Staff information can be called up directly.

Similarly, as long as the bar code of the product is available, all test parameters related to it can be adjusted in the system;

What's more, it is impossible to skip the station. As long as one process is skipped, there is no way to pass in the next process. Even if you try twice more, the barcode will be locked;

Liu Xiaoming, who knows a little about computers, thinks that this system is actually optimized by the company in the original system, and it can be completed by adding some paths and hardware;

However, those customers just tinkered in the conference room for less than half an hour, and then the whole system began to work ...

Liu Xiaoming sincerely admired the customer who was too young to install the software on his own test station;

In the past, when I saw the technicians in the engineering department when I was adjusting the machine, I sometimes felt a little envious, but he felt that if someone taught me, he could do the job himself because of some simple debugging operations, he just stole the teacher next to him. Learned ...

And this time, he really admired that these customers changed the entire testing interface;

The previous test interface was to select the corresponding test program, and then start the test. Slowly skip the test steps. The above is a dense pile of data, and then jump step by step. If it fails, print a note and tie it to the product.

Now, the test interface is very simple and tidy, with only three keys: start test, stop and single step test;

The operation is also very simple. Put the product in place, plug in the line, then scan the bar code, press to start the test, and it is OK. Wait until the test is completed, just remove the product directly;

Take the defective products to the repair station, and you can see the information of the bad steps as soon as you scan the barcode. After the repair, you must upload the cause of the defective to the system ...

Liu Xiaoming felt for the first time that his own work could become so simple;

However, he also felt a sense of crisis. His previous self may be indispensable because a skilled tester is not so easy to train;

Therefore, occasionally get a little temper, and even ask him to take the Overlord leave, and the foreman can do nothing about him;

No matter whether it is the wiring, maintenance, maintenance of the test fixture, or the operation of the complicated test interface, Liu Xiaoming has a bottom in his heart, and he is definitely one of the best in the production workshop;

In the past, even if I offered to quit my job, the foreman or even the supervisor would find a talk with him alone. It was nothing more than letting off his grievances and dissatisfaction, and then pledge to fight for some benefits-and really won.

Now he feels a sense of weakness. Although he is still in this position, the job in this position has become simpler;

Such a simple operation, in fact, as long as no one has a problem in his mind, he can learn it one or two times;

It was a very critical post, and it seemed that everyone could take over his job overnight;

Liu Xiaoming doesn't have the spirit of a master. He has a very clear positioning for himself. He is a part-time job and takes money ~ www.wuxiaspot.com.

However, when the overly young client came to him again and looked at the test data on the test bench, he couldn't help asking:

"Handsome guy, did you develop this thing yourself? It looks very advanced."

Zhang Yifan looked up slightly, and found that the tester in the factory was questioning, so he explained: "The reason for developing this system is mainly to consider the need to prevent fools in the process and not allow any bad flow to the next station. go with;"

"Sounds like it looks great," Liu Xiaoming said.

"Actually, this is only the initial application phase of this system," Zhang Yifan said patiently. "Our future plan is to cancel this part of the actions that need to be done by people to eliminate all hidden dangers;"

"How do you say that?"

"It is inevitable that there will be mistakes and omissions when operated by humans. It may even cause misjudgment of the system due to some subjective factors. As a result, some noise will be recorded in the big data;"

"But the machine won't. One is one, the other is two," Zhang Yifan explained. "What we have to do is first turn intellectual labor into physical action, and then turn this mechanical physical action into machine action. .... "

Liu Xiaoming was a little confused, but seemed to understand a little;

Simplify a job that originally required certain skills, and then use machines to replace people in this simple job;

Liu Xiaoming couldn't think too much, because the production line had been started again, and the products on the conveyor belt kept him busy .....

However, there is always an idea in his mind. If these positions are replaced by machines, what should these people do in this position?